Bens Dead Silver D turbo

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Bens Dead Silver D turbo
#1
So I've Finally got round to posting a Project Thread


Used to own this
[Image: IMAG0019.jpg]

1.6 16 valve, proper laugh to drive off road, but it was too thirsty so stuck an ebay add up and got a message back asking if i wanted to swap for a d turbo

So doing a straight swap I got this!

[Image: IMG_0506.jpg]

It was a proper pig to start so new oil and filters and a set of bosch plugs

Next thing I needed was some new brakes, so off the the ebay again and got some gti 6 calipers

[Image: IMG_0505.jpg]

You can see the massive size difference between them!

[Image: IMG_0503.jpg]

Discs side by side

wheels with old discs

[Image: IMG_0501.jpg]

vs

Wheels with new discs

[Image: IMG_0507.jpg]

(Curbage was done by previous owner)


Next thing to do is connect up my boost gauge and have a play with the pump and turbo

not sure whats after that!
Quote:(15:06:27) Toms306: Wd40d it and had a good tug, came straight off

[Image: attachment.php?aid=5522]


Reply
Thanks given by:
#2
Looks like the previous owner used to drive by feel not sight! lol 'Bang'......... oh that'l be a curb then.... :roll: LOL
Reply
Thanks given by:
#3
Yeah, Been trying to find a cheap place near me that will refurb them but not be silly money! so far been quoted £195 for the set!
Quote:(15:06:27) Toms306: Wd40d it and had a good tug, came straight off

[Image: attachment.php?aid=5522]


Reply
Thanks given by:
#4
Wouldnt bother refurbing them mate, look for something else IMO Smile
306oc Chat Wrote:15:30: Toms306 - :Genuinely thought it was gonna explode when I was playing with Sam
22:57: SRowell - :wtf why didnt you try harder to make me come!
[Image: connorsig.jpg]
Reply
Thanks given by:
#5
Lol epic curb rash! Id just get a set of decent clones for 100-150 and jobs a good one
Nice potential in the car
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#6
Looks alright, wouldn't pay someone to refurb those though, either DIY them or scrap them and get something else Smile

As said by Dan, paking by feel and not sight lol
Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
Reply
Thanks given by:
#7
I want your brakes Big Grin
[Image: mintsig.jpg]
STAGE2 XUD DEAD ATM ENGINE REBUILD
GARRET T2-BOSCH PUMP-GROUNDED LDA PIN-GOV MOD-FMIC-STRAIT THRU STAINLESS EXHAUST SYSTEM
COMING SOON TD04 Big Grin
Reply
Thanks given by:
#8
mark_airey Wrote:Looks alright, wouldn't pay someone to refurb those though, either DIY them or scrap them and get something else Smile

As said by Dan, paking by feel and not sight lol

Using wheels are kurb feelers lol I actually almost cry when I touch a kurb
306oc Chat Wrote:15:30: Toms306 - :Genuinely thought it was gonna explode when I was playing with Sam
22:57: SRowell - :wtf why didnt you try harder to make me come!
[Image: connorsig.jpg]
Reply
Thanks given by:
#9
Update:

Driving home from my the inlaws on Monday there's a burst water main.

Drove passed it and BANG!
hit a pot hole and popped the tyre, buckled it too Sad

So got home and went out in the Mrs car to take some pictures and get the council to send me a claim form

[Image: PotHole1.jpg]

Took a measuring tape too to show the depth of the hole

[Image: PotHole2.jpg]

It was completly submerged by water so you couldnt see it!

so now not only is that wheel kurbed like a bitch its now buckled too!

If any one has a set of bigish wheels with tyres I might be interested soon! whistle
Quote:(15:06:27) Toms306: Wd40d it and had a good tug, came straight off

[Image: attachment.php?aid=5522]


Reply
Thanks given by:
#10
Can't you complain to the council?
[Image: Foxy2.jpg]
Reply
Thanks given by:
#11
Foxy-jim Wrote:Can't you complain to the council?


Ben Jay Wrote:So got home and went out in the Mrs car to take some pictures and get the council to send me a claim form

Have done

e-mailed them my address so they can send me a claims form
Quote:(15:06:27) Toms306: Wd40d it and had a good tug, came straight off

[Image: attachment.php?aid=5522]


Reply
Thanks given by:
#12
Proud owner of some £38 speed lines! just need to courier them to me now!
Will get pictures up when i get them!
Quote:(15:06:27) Toms306: Wd40d it and had a good tug, came straight off

[Image: attachment.php?aid=5522]


Reply
Thanks given by:
#13
I offered up a wheel just to see what it looked like.

[Image: IMG_0532.jpg]

they are in really good condition. will probably need a lick of paint though as its peeling at a couple of bits.

the tyres have a aload of life on them aswell!
Quote:(15:06:27) Toms306: Wd40d it and had a good tug, came straight off

[Image: attachment.php?aid=5522]


Reply
Thanks given by:
#14
£38 is a proper bargain! Will look decent!
[Image: Foxy2.jpg]
Reply
Thanks given by:
#15
MAN that pothole is mental!!

and the speedlines, great choice! get them refurbed! i reckon against the silver paint, perhaps white pain job would look swish!
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#16
was thinking maybe gun metal grey with a coloured lip
Quote:(15:06:27) Toms306: Wd40d it and had a good tug, came straight off

[Image: attachment.php?aid=5522]


Reply
Thanks given by:
#17
Ben Jay Wrote:was thinking maybe gun metal grey with a coloured lip

ooh yes! that sounds nice! maybe a blue.. but i've seen them done well, and seen it done bad!

in my opinion, silver dturbos are hard to make look good unfortunately! but those wheels are a good start! Big Grin
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#18
have the lions in the middle the same colour as the lip too.
ginge you coming ace on monday with the other southerners?
Quote:(15:06:27) Toms306: Wd40d it and had a good tug, came straight off

[Image: attachment.php?aid=5522]


Reply
Thanks given by:
#19
Do not paint them white, they are a nightmare to clean and end up looking dirty all the time lol

If it was me I would be doing them as close to brake dust colour as I could get Wink
Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
Reply
Thanks given by:
#20
lol so gun metal grey then! With the lip colour i was thinking maybe a nice blue such as this â?? or maybe thisâ??

is the lip painted on or is it a sticker?
Quote:(15:06:27) Toms306: Wd40d it and had a good tug, came straight off

[Image: attachment.php?aid=5522]


Reply
Thanks given by:
#21
Ben Jay Wrote:lol so gun metal grey then! With the lip colour i was thinking maybe a nice blue such as this â?? or maybe thisâ??

lol yeah, Halfords anthracite wheel paint is a good choice!

As far as the blue goes, do it! should look great IMO Smile
Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
Reply
Thanks given by:
#22
Ben Jay Wrote:is the lip painted on or is it a sticker?

usualy painted - my brother used the stick on types on his yamaha 650, i know, a differnt wheel, but the imperfections show up a mile off

And no mate, i'm on an island as many know, costs a bomb to get off - going to try and get to the april meet, then FCS ofcourse
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#23
Was thinking this colour for the wheels [Image: 100_2889.jpg]
Quote:(15:06:27) Toms306: Wd40d it and had a good tug, came straight off

[Image: attachment.php?aid=5522]


Reply
Thanks given by:
#24
*nods* this is what I was thinking of

http://www.halfords.com/webapp/wcs/stor ... yId_165495

which looks like -
[Image: DSC_4109.jpg]

so yeah, same thing lol
Team Orange Engine Bay

My flickr photostream - http://www.flickr.com/photos/markairey
Reply
Thanks given by:
#25
how many tins you think im going to need?

Saw this guide http://www.fiatforum.com/miscellaneous-g...spray.html

but might go a bit further on it
Quote:(15:06:27) Toms306: Wd40d it and had a good tug, came straight off

[Image: attachment.php?aid=5522]


Reply
Thanks given by:
#26
I did my clones in halfords steel grey and I used 1 1/2 cans and same in primer and laquer.
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#27
small update:

Bought a bosch system for £70. Waiting for it to arrive. Also getting a timing belt and water pump kit from work for FREE =D
Quote:(15:06:27) Toms306: Wd40d it and had a good tug, came straight off

[Image: attachment.php?aid=5522]


Reply
Thanks given by:
#28
Get me a water pump please Big Grin
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Reply
Thanks given by:
#29
you can have the one i take off if you want. its working fine think the previous owner had changed it when they did the timing belt. ill check it once its out.
Quote:(15:06:27) Toms306: Wd40d it and had a good tug, came straight off

[Image: attachment.php?aid=5522]


Reply
Thanks given by:
#30
Need an xsi one though lol
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 1 Guest(s)