20-03-2013, 11:24 PM
(This post was last modified: 20-03-2013, 11:48 PM by cheesegrater.)
Thought I'd put a small project thread together with the remaining photos I have seeing as I've somehow forgotten my dropbox password!
My car started off in a sorry state having been stood down for a good 3 years or so.
It had a poorly sounding 1600 engine which got swapped out for another 1600.
Once the massive hole in the fuel pump was sorted I drove it for a year.
I then got a tad bored with the 1600 and went for an XU10J4RS!
I decided to rebuild the engine whilst it was out, it seemed silly not to.
This was always going to be a fun fiddly job!
I also fitted a TTV flywheel because I figured Im not pulling the, comparatively speaking, heavier shell of the 306 around.
Can't remember what I was making here but heres my home brew lathe
Got bored one saturday so I took the 1600 lump out!
I'll update more when I get the time!
My car started off in a sorry state having been stood down for a good 3 years or so.
It had a poorly sounding 1600 engine which got swapped out for another 1600.
Once the massive hole in the fuel pump was sorted I drove it for a year.
I then got a tad bored with the 1600 and went for an XU10J4RS!
I decided to rebuild the engine whilst it was out, it seemed silly not to.
This was always going to be a fun fiddly job!
I also fitted a TTV flywheel because I figured Im not pulling the, comparatively speaking, heavier shell of the 306 around.
Can't remember what I was making here but heres my home brew lathe
Got bored one saturday so I took the 1600 lump out!
I'll update more when I get the time!