Posts: 2,659
Threads: 115
Joined: Apr 2012
Reputation:
26
Location: Stow
Car Model/Spec: 306
Thanks: 3
Given 0 thank(s) in 0 post(s)
19-04-2012, 03:57 PM
(This post was last modified: 28-11-2012, 10:05 PM by spike2002.)
Bought the car just over a year ago for £450 with a weeks' mot and no tax.
The lad I brought her from had only had her a week, and couldn't get insured on her as he was only 18
How she looked when i got her
So I put her in for MOT expecting the worse and she passd with flying colours :dance:
Drove her around for 6 months and one day she started to spew creamy oil and water out of the radiator :evil: so changed the heat exchanger hoping for the best and cleaned all of the cooling system out exc and few days later it happened again :evil: So conclusion was the head gasket had gone. Could maybe have something to do with having the needle bouncing on the clock at 140mph (on a private road) :o
For the past 6 months I have been sourcing a new engine for her and today I had this delivered
55k xsara vts engine out of a 51 plate vts
Will be fitting new cam-belt,water-pump etc. and swaping all the loom over from the gti in a few weeks
I can't wait to ger her back on the road again; the 1.6 was killing me until I killed it (gearbox went 3rd time lol)
Also got crystal headlights coming as well.
Tempted to put new clutch and lightened fly wheel on as well as an ally bottom pulley while the engine is out
I'm also thinking of changing the colour of the wheels any suggestions?
Posts: 8,749
Threads: 208
Joined: Jan 2012
Reputation:
60
Location: Wiltshire
Car Model/Spec: ph2 Gti6 / ph4 HDI Estate
Thanks: 1
Given 5 thank(s) in 5 post(s)
Whats the mileage on the car? the engine was a top find :thumbup: Just be a little more gentle with this one
Member of 99% warning or your nothing club!
Posts: 2,659
Threads: 115
Joined: Apr 2012
Reputation:
26
Location: Stow
Car Model/Spec: 306
Thanks: 3
Given 0 thank(s) in 0 post(s)
Car has coverd 97,000 if I remember right Yeah I will be abit more gentle when it is up and running not to gentle though haha
Posts: 14,208
Threads: 448
Joined: Dec 2011
Reputation:
51
Location: isle of wight
Car Model/Spec: Pov. Spec White '6
Thanks: 17
Given 18 thank(s) in 18 post(s)
Thats a good find! Are the engines exactly the same or is there more power from one or the other?! I have no idea. Nice one though mate. Will be watching this for a while
TEAM CONROD SHITTING RALLYE!
Posts: 2,659
Threads: 115
Joined: Apr 2012
Reputation:
26
Location: Stow
Car Model/Spec: 306
Thanks: 3
Given 0 thank(s) in 0 post(s)
Same engine mate I will have to use my loom and swap few sensors around and that tho as they are different
Posts: 14,208
Threads: 448
Joined: Dec 2011
Reputation:
51
Location: isle of wight
Car Model/Spec: Pov. Spec White '6
Thanks: 17
Given 18 thank(s) in 18 post(s)
Ahhhh fair enough, gunna keep the citroen badge on the manifold?
TEAM CONROD SHITTING RALLYE!
Posts: 2,659
Threads: 115
Joined: Apr 2012
Reputation:
26
Location: Stow
Car Model/Spec: 306
Thanks: 3
Given 0 thank(s) in 0 post(s)
Nope manifold will be sold on as I dont need it
Posts: 8,749
Threads: 208
Joined: Jan 2012
Reputation:
60
Location: Wiltshire
Car Model/Spec: ph2 Gti6 / ph4 HDI Estate
Thanks: 1
Given 5 thank(s) in 5 post(s)
You are putting the 6 box on it right? And that mileage isnt bad atall
Member of 99% warning or your nothing club!
Posts: 2,659
Threads: 115
Joined: Apr 2012
Reputation:
26
Location: Stow
Car Model/Spec: 306
Thanks: 3
Given 0 thank(s) in 0 post(s)
Yes mate i will be keeping the 6 box took me ages to find a engine with lowish milage just hope its not a dud wen i fit it. should be ok tho as i got it off jdmotorsport so dowt they would sell me a dud lol
Posts: 4,926
Threads: 266
Joined: Dec 2011
Reputation:
18
Location: Somerset
Car Model/Spec: 205 DTurbo
Thanks: 73
Given 7 thank(s) in 7 post(s)
R45_ODV Wrote:should be ok tho as i got it off jdmotorsport so dowt they would sell me a dud lol
...
Posts: 8,749
Threads: 208
Joined: Jan 2012
Reputation:
60
Location: Wiltshire
Car Model/Spec: ph2 Gti6 / ph4 HDI Estate
Thanks: 1
Given 5 thank(s) in 5 post(s)
Is JDmotorsport the one who goes by other names on other forums that people have had some ridiculus problems with?
Member of 99% warning or your nothing club!
Posts: 2,659
Threads: 115
Joined: Apr 2012
Reputation:
26
Location: Stow
Car Model/Spec: 306
Thanks: 3
Given 0 thank(s) in 0 post(s)
puglove Wrote:Is JDmotorsport the one who goes by other names on other forums that people have had some ridiculus problems with?
erm i hope not :/ user name on .net is jdmotorsport on oc i think its jdmsport website <!-- w --><a class="postlink" href="http://www.jdmotorsport.com" onclick="window.open(this.href);return false;">www.jdmotorsport.com</a><!-- w -->
Posts: 7,152
Threads: 130
Joined: Jan 2012
Reputation:
82
Location: Kingston
Car Model/Spec: 106 GO-NAD
Thanks: 0
Given 0 thank(s) in 0 post(s)
deffo swap stuff over while its out the car, makes life so much easier!
Member of the 99% warning or you're nothing club
Posts: 2,659
Threads: 115
Joined: Apr 2012
Reputation:
26
Location: Stow
Car Model/Spec: 306
Thanks: 3
Given 0 thank(s) in 0 post(s)
samass Wrote:deffo swap stuff over while its out the car, makes life so much easier!
Yes will be doing cam belt and water pump clutch etc etc all while out of the car
Posts: 14,208
Threads: 448
Joined: Dec 2011
Reputation:
51
Location: isle of wight
Car Model/Spec: Pov. Spec White '6
Thanks: 17
Given 18 thank(s) in 18 post(s)
Jdm did have a bad rep at first, but I think now he has built up quite a reasonable one. Think that bad rep came from a few late deliverys and some side skirts that got lost/stolen/broken. I don't think there is anything to worry about
Hope the engine swap goes well
TEAM CONROD SHITTING RALLYE!
Posts: 2,659
Threads: 115
Joined: Apr 2012
Reputation:
26
Location: Stow
Car Model/Spec: 306
Thanks: 3
Given 0 thank(s) in 0 post(s)
Yeah there delivery is hit and miss spoke to them a few times now and I must say darren seens like a top bloke so i dont think I have anything to worry about
Posts: 3,984
Threads: 138
Joined: Dec 2011
Reputation:
72
Location: Milford, Surrey
Car Model/Spec: Mincebus
Thanks: 0
Given 0 thank(s) in 0 post(s)
Can I enquire why you bought a new engine rather than doing the hg on the existing one? HG, all pulleys tensioners & new cambelt could all be done at the same time, and it'd be miles easier to get to the 'box to do the clutch too...?
I'm not knocking you for buying another engine, if it was a barghain why not, but if you did the hg etc on the existing engine you'd at least be able to inspect the bores etc, and you'd know a lot more about any potential problems with the engine. Unlike this new engine, which although low mileage, could have any number of problems which don't neccessarily affect the running but may become more apparent... All I'm saying is you can never be sure with a 2nd hand engine, but if they money was similar to doing the hg, I reckons it may have been worth looking into the hg...
Also you can get the pistons machined for greater valve lift and then fit some naughty cams hehehe
'99 Ph3 Diablo Gti(Victor) Dead
Astor 'X' 4 GTi6- 6 - SOLD!
'08 LY Renault Megane RS 230 F1 Team R26 - GONE
'56 BMW Z4 Coupe 3.0si Sport - SCHWIIIING!
Posts: 2,659
Threads: 115
Joined: Apr 2012
Reputation:
26
Location: Stow
Car Model/Spec: 306
Thanks: 3
Given 0 thank(s) in 0 post(s)
The plan is to get the gti back on the road asap. The new engine was a bargain thats why i had it The old engine i am keeping as a project as it will be fully rebuilt over time and eventualy droped back in to the gti
Posts: 866
Threads: 61
Joined: Dec 2011
Reputation:
4
Thanks: 0
Given 6 thank(s) in 5 post(s)
I bought an s16 engine off of krisb on .net and the headgasket went within a month. From my experience do the headgasket before you put it in.
Posts: 5,205
Threads: 91
Joined: Dec 2011
Reputation:
83
Location: Oxfordshire/Cornwall
Car Model/Spec: Moonstone DT/Volvo V50
Thanks: 2
Given 41 thank(s) in 41 post(s)
For the sake of £70... Do the head gasket, it's a complete twunt when it's in the car...
(16-05-2016, 10:45 AM)Toms306 Wrote: Oh I don't care about the stripped threads lol, that's easily solved by hammering the bolt in. Nanstone GTD5 GT17S - XUD9TE
Volvo V50 D5 R-Design SE Sport - Daily cruise wagon.
Posts: 2,659
Threads: 115
Joined: Apr 2012
Reputation:
26
Location: Stow
Car Model/Spec: 306
Thanks: 3
Given 0 thank(s) in 0 post(s)
Now the old 1.6 has gone to pug heaven i have space to work on the gti should be some progress soon
Posts: 2,659
Threads: 115
Joined: Apr 2012
Reputation:
26
Location: Stow
Car Model/Spec: 306
Thanks: 3
Given 0 thank(s) in 0 post(s)
16-06-2012, 11:21 AM
(This post was last modified: 19-07-2012, 09:24 PM by spike2002.)
Posts: 543
Threads: 15
Joined: Dec 2011
Reputation:
1
Location: Oldbury, M5, J2
Car Model/Spec: P2 Nile GTi6
Thanks: 0
Given 0 thank(s) in 0 post(s)
Looks good
Posts: 2,659
Threads: 115
Joined: Apr 2012
Reputation:
26
Location: Stow
Car Model/Spec: 306
Thanks: 3
Given 0 thank(s) in 0 post(s)
16-06-2012, 11:43 AM
(This post was last modified: 16-06-2012, 11:45 AM by spike2002.)
(16-06-2012, 11:29 AM)TheGateKeeper Wrote: Looks good
thanks mate she needs a good clean
got loads to do inc
Fit the 55k xsara vts engine
Rebuild the rear beam
Fit all the parts i have need to finish spraying a few things
Phase 3 spoiler
Phase 3 rub strips
Purple masks
Crystal fogs
Purple and gloss black mirrors
Purple and gloss black bonnet badge
Purple fuel cap covers
Silver centre console
Strut brace
Powerflex bushes
7" flip out screen dvd player
Posts: 543
Threads: 15
Joined: Dec 2011
Reputation:
1
Location: Oldbury, M5, J2
Car Model/Spec: P2 Nile GTi6
Thanks: 0
Given 0 thank(s) in 0 post(s)
Awesome plans Look forward to the end result
Posts: 2,659
Threads: 115
Joined: Apr 2012
Reputation:
26
Location: Stow
Car Model/Spec: 306
Thanks: 3
Given 0 thank(s) in 0 post(s)
I will hopefully have her back on the road for the RR meet
Posts: 2,659
Threads: 115
Joined: Apr 2012
Reputation:
26
Location: Stow
Car Model/Spec: 306
Thanks: 3
Given 0 thank(s) in 0 post(s)
17-06-2012, 11:35 AM
(This post was last modified: 19-07-2012, 09:32 PM by spike2002.)
Posts: 4,566
Threads: 102
Joined: Dec 2011
Reputation:
9
Location: Sunderland
Thanks: 60
Given 14 thank(s) in 14 post(s)
hurry up and get her running again! i hated seeing my car with a f*cked engine.
Posts: 2,659
Threads: 115
Joined: Apr 2012
Reputation:
26
Location: Stow
Car Model/Spec: 306
Thanks: 3
Given 0 thank(s) in 0 post(s)
There will be progress over the nxt few weeks as i have no work at tho mo so means i have plenty of free time to work on the 6
Posts: 2,659
Threads: 115
Joined: Apr 2012
Reputation:
26
Location: Stow
Car Model/Spec: 306
Thanks: 3
Given 0 thank(s) in 0 post(s)
19-06-2012, 07:32 PM
(This post was last modified: 19-06-2012, 07:35 PM by spike2002.)
|