A Street Sleeper is reborn! THE END

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
A Street Sleeper is reborn! THE END
(19-11-2016, 03:42 PM)procta Wrote: Well that's that, the f*cking thing jumped into gear on me and hit the house wall, only thing you can do is laugh



To be fair I did laugh at that

Best way to go

Thoughts are with you and yours RIP


Sent from my iPhone using Tapatalk Pro
Reply
Thanks given by:
(19-11-2016, 04:01 PM)zx_volcane Wrote:
(19-11-2016, 03:42 PM)procta Wrote: Well that's that, the f*cking thing jumped into gear on me and hit the house wall, only thing you can do is laugh



To be fair I did laugh at that

Best way to go

Thoughts are with you and yours RIP


Sent from my iPhone using Tapatalk Pro
yeah best way to go, went out with a bang!
Reply
Thanks given by:
this is so cruel, can you bear to put pics up? . . . . .
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
sadly matt, my f*cking phone will not play ball. So I cannot up load any photos of it, Feel free to laugh lads.
Reply
Thanks given by:
   

Gutted for you mate.
                                             [Image: 2ljm03k.jpg]


                                                                                      I Don't Have A 306.
Reply
Thanks given by:
That's it with me with metros now, i am working on a deal with some one to take the car away as a donor for his GTA.
Everything i have metro related will either go with it or binned, 
Not sure where i move from here project wise, that's if i get another project.
I have informed the metro owners club of the car, and i will do as much how to guides for them as possible before i log off there for good.
Reply
Thanks given by:
thats a shame man, real shame. make sure you get your new project up on here when you get one. ill be sure to follow it just like ive follwed this one through. best of luck
On a break from 306oc for personal reasons. If anyone needs or wants me most of you have my number and or facebook messenger
Thanks for the good times guys n gals. I might be back. Who knows.
Reply
Thanks given by:
(19-11-2016, 05:08 PM)bashbarnard Wrote: thats a shame man, real shame. make sure you get your new project up on here when you get one. ill be sure to follow it just like ive follwed this one through. best of luck

i cannot see where i will go now sadly, there wont be another metro project, this one was coming to the end anyway, the parts are getting rather thin on the ground now and that goes for all rover bits. Not to mention getting a little pricey. 
Great little cars and highly underrated for what they are, and finding another good one to reshell this one is way to far out now.
Reply
Thanks given by:
wtf, how does something jump into gear?! out of gear I can understand, but into?!
need a part number? http://public.servicebox.peugeot.com/ and http://service.citroen.com/ will sort you out.
Reply
Thanks given by:
(19-11-2016, 05:26 PM)welshpug Wrote: wtf, how does something jump into gear?!  out of gear I can understand, but into?!

f*ck knows welshpug, i can tell you this, the fucker still had the hand brake on! i was just tidying up ready to go out of a test drive. Started the engine and that was it, it took off! Never touched any gears or anything, I did have the car running a little before hand to introduce some anti freeze.
Reply
Thanks given by:
Noooo!!!

Just read up you fixed it... Surely can repair the front end??
Wishes for more power...
Reply
Thanks given by:
ohhh so it was in gear when you fired it up.
need a part number? http://public.servicebox.peugeot.com/ and http://service.citroen.com/ will sort you out.
Reply
Thanks given by:
(19-11-2016, 05:47 PM)Piggy Wrote: Noooo!!!

Just read up you fixed it... Surely can repair the front end??

not worth it, and finding panels now is a pain,

(19-11-2016, 05:53 PM)welshpug Wrote: ohhh so it was in gear when you fired it up.

it would have just stalled, my dad thinks its either been half in and half out.
Reply
Thanks given by:
well that's it, the car now has been SORNed, The car now is provisionally sold as a donor to another metro owner on the metro owners club.
am giving him everything I have metro related now too. No point in me hanging on to anything. The lads getting a right old deal is he not, but then again the lads driving a good way for it too.
Not sure what I will do next sadly lads, I know I wont touch another engine conversion. After the f*ck on I have had with the street sleeper project, but then again that's all been down to bad information.
Was it all worth it in the end? yes for the showing people up in a car with f*ck all street credit. As for the price of doing it, sadly not. The project now stands well over 10k easy! that's going across the two shells.
I could have done a wound up HDI for far less, going back on knowing what I know now.
Those of you have been following me for 8 years, I would like to thank you for pushing me on with this. I think with what happened was the time to call it. I am not gutted on what happened it was just the way the cards have been stacked.
Was this one a Fine car? yeah it was! Just ran out of road on this one lol!
Reply
Thanks given by:
Ahhh, some things do come to and end.

Perhaps for the best with this one, and can't deny you gave the car some love over the years.

Prob best not to tot up the totals, never a good move. Hopefully this won't put you off fiddling with another motor in the future. Hindsight is not to be trusted.
Reply
Thanks given by: procta
Never ever ever tot up totals.
But consider how much "information" and "experience" cost... Then you realise it wasnt so bad.
IE: the racetractor. For fear of my own shock death I wont tot it all up...but I've learnt so much to apply to future projects
Wishes for more power...
Reply
Thanks given by: procta
(25-11-2016, 01:38 PM)zx_volcane Wrote: Ahhh, some things do come to and end.

Perhaps for the best with this one, and can't deny you gave the car some love over the years.

Prob best not to tot up the totals, never a good move. Hopefully this won't put you off fiddling with another motor in the future. Hindsight is not to be trusted.
i wouldn't go through the reshell process again. There just isnt the cars out there now, or even the panels now. I will be struggling in a couple of years down the road. In fact it was touch and go with the welding, i always said if the shell was f*cked or the engine went bang id pull the plug. Plus me and my dad lost all love for the car, with the problems its had. a simple headgasket change turned into a nightmare.
(25-11-2016, 03:52 PM)Piggy Wrote: Never ever ever tot up totals.
But consider how much "information" and "experience" cost... Then you realise it wasnt so bad.
IE: the racetractor. For fear of my own shock death I wont tot it all up...but I've learnt so much to apply to future projects

The info and experience i will always put to good use, me and my dad have done with the landy he has now, wiring in spots and doing other odds and sods with out any trouble, My dad knows a few things, but learned a lot with the metro a long side me. We both really went the distance with the two metros.
Id still will love to rebuild another car again, i do have unfinished bussiness there.
Reply
Thanks given by:
Just buy an MGB and drop a 3.9 V8 into it ThumbsUp
[Image: 17b33c2a-8471-4313-992e-0a4b324cf926_zps2e63812a.jpg]
Team Cyril
Reply
Thanks given by:
welllll,
if you fancy doing a TR7 (2.0) hard top resto, i'd find the wedge to buy it off you - - - - -
It goes, it stops (as reqd). Makeup
Hate Housework!
Reply
Thanks given by:
(26-11-2016, 08:04 AM)Matt-Rallye Wrote: Just buy an MGB and drop a 3.9 V8 into it ThumbsUp

(26-11-2016, 09:03 AM)Magenta Sunset Wrote: welllll,
if you fancy doing a TR7 (2.0) hard top resto, i'd find the wedge to buy it off you - - - - -

I am finished with MG and rare stuff now, far to much of a hassle.
Reply
Thanks given by:
well after having a think, and with the mount of money and time i have spent, on sorting the engine out. I have found another shell, on an R plate, so i have to look at finding a cat for the system for the MOT,
This one is a Dark blue so again another strip and swop over, but i can leave the loom in place and injection system on. 
I will post photos of the new car, Its a cracker mind! Not sure if i should switch the front to Metro instead of R100.
Reply
Thanks given by:
I actually saw an MG metro this morning!!
need a part number? http://public.servicebox.peugeot.com/ and http://service.citroen.com/ will sort you out.
Reply
Thanks given by:
Yeeeeeaaaaaas! Best news I've had all week!

Surely dumby cat and kind MOT man? Drive here and i'll sort it Wink
Wishes for more power...
Reply
Thanks given by:
is anyone bothered about a photo of the new shell? i have one ready to post up but if no one is interested then i will not bother.
Reply
Thanks given by:
Pics of the new shell and the crash damage are positively encouraged.
Good news you are cracking on with it mate.
                                             [Image: 2ljm03k.jpg]


                                                                                      I Don't Have A 306.
Reply
Thanks given by:
Why not? Go for it.

Ps. Congrats on the 306oc award Smile
Reply
Thanks given by:
ok lads here's the new shell,

[Image: s-l16006_zpseroyrkb9.jpg]

picked this up today, its a Defender 300 TDI
Reply
Thanks given by:
Great choice, Looks well, I prefer wolf rims over the 8 spokes though
Reply
Thanks given by:
That looks like a VERY tidy example Smile
Reply
Thanks given by:
I have been dropped in it today about this going the journey, it was going to be used as a donor car for a Racing driver, but f*ck it, I am weighing this fucker in this week, with the every fuckin spares I have.
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Hi, building VNT'd 205 Sleeper in Chesterfield... 399road 145 76,222 09-02-2019, 07:52 AM
Last Post: Chris_90
  Citroen Dispatch Sleeper Kind of.. Will 2 2,158 15-02-2017, 07:24 PM
Last Post: Poodle
  205 dt sleeper, engine in :) Paul_13 171 58,465 20-04-2015, 09:19 AM
Last Post: Paul_13

Forum Jump:


Users browsing this thread: 5 Guest(s)