Pic heavy 2yr Build Gti6 road & track

[Attiq1122]

Thanks, very informative...  


http://www.supermotors.net/forums/thid-1...-new#46026

[Day666]

Been asked about fitted pictures of Ryan's Fibreglass dashes ...he's on Facebook & mainly The 6 forum ....

---

Another

---

Another

---

Another

[Day666]

Not posted for a while ...I've gone as far as i could afford & really wanted a Sequential box that's not going to happen ....
I'm storing the car over Winter & ive ordered a F2000c Full Carbon Fibre rear tailgate spoiler & got a pair of 25mm Torsion Bars coming also ..
I'll be fitting these & x4 new Dunlop DZ03g tyres all ready for next year & hopefully will be taking a trip to Cadwell ...

[Eeyore]

sounds great where do you get the carbon bits from?

[Day666]

sounds great where do you get the carbon bits from?

https://www.maximotorsport.com/

[Day666]

Small update ...
Just ordered the very first pair of Carbon/ Kevlar mix complete 306 doors from Maxi Motorsport / Tony Palfrey owner ...
Contact him on https://www.maximotorsport.com/


Amazing bloke who's twisted the arm of the company who only ever make them in GRP ....Colin Satchell & Dean Gammon have his doors in Carbon / Kevlar mix for both there 106s amazing quality

So 8wks time a set of doors should save me (40-50 kgs) as I'm using winders & glass at moment ...my doors will be up for sale complete if anybody's interested?


Also getting my rear 205 group A dampers Revalved by Bilstein to take my 25mm Torsion Bars ...

[Piggy]

Sequential box would finish this off nicely.

Love itso.

[Day666]

Sequential box would finish this off nicely.

Love itso.

Your so 100% spot on  

Maybe this time next year ????  That's my ultimate item now

Just under 300bhp & sub 900kgs with Sequential box

[bilboaustin]

love the look of that dash!

[Day666]

love the look of that dash!

Well thank you ..it looks nearly standard but 19kg saving but no heater sadly ..Ryan ...Pug_306 sells them
They are Now on Ebay or half dash version or contact him on 6forum he bought the mould off me ....it was a one off NOT now  

[bilboaustin]

I may have to buy one! Would it fit in an xsara?! Haha I couldn't do without a heater as I still use my car as a daily, I've looked into running a kit car type heater just to use as a de-mister.


Sent from my iPhone using Tapatalk

[Eeyore]

just been on the maxi website. lots of good stuff on there. Have you got their carbon door cards?

[Day666]

just been on the maxi website. lots of good stuff on there. Have you got their carbon door cards?

YES & windup windows

[Piggy]

No heater

[Matt-Rallye]

No heater

Real men don't need a heater

So aiming for 300bhp/ton with sequential box? I call shotgun on another run at pugfest in that setup!!! :love:

[Day666]

No heater

Real men don't need a heater

So aiming for 300bhp/ton with sequential box? I call shotgun on another run at pugfest in that setup!!! :love:

Not 100% about my car at Pugfest next year Matt ?
25mm torsion bars & rear 600/320 dampers & still no power steering isn't going to make it pleasent & last years was bad enough !

I'm setting it up more for Combe / Cadwell / Oulton track m8 ...100% doing latter two mid next year

Since you last went in it ?....it should be 70kgs lighter & have rear F2000 spoiler & much better rear end with 25mm TBs & revalved Dampers ...the control meaning Ass end will come out & more front downforce with a large front Splitter being made soon & x4 new Dunlops ...mine are 2.5years old now & bold
Plus getting it corner weighted again once all bits are fitted

[Matt-Rallye]

No heater

Real men don't need a heater

So aiming for 300bhp/ton with sequential box? I call shotgun on another run at pugfest in that setup!!! :love:

Not 100% about my car at Pugfest next year Matt ?
25mm torsion bars & rear 600/320 dampers & still no power steering isn't going to make it pleasent & last years was bad enough !

I'm setting it up more for Combe / Cadwell / Oulton track m8 ...100% doing latter two mid next year

How come still no PAS? dude your car rocked the hill this year and im sure provided the best soundtrack of the day!  be a shame not to see it there next year.

[Day666]

No heater

Real men don't need a heater

So aiming for 300bhp/ton with sequential box? I call shotgun on another run at pugfest in that setup!!! :love:

Not 100% about my car at Pugfest next year Matt ?
25mm torsion bars & rear 600/320 dampers & still no power steering isn't going to make it pleasent & last years was bad enough !

I'm setting it up more for Combe / Cadwell / Oulton track m8 ...100% doing latter two mid next year

How come still no PAS? dude your car rocked the hill this year and im sure provided the best soundtrack of the day!  be a shame not to see it there next year.

I may do but it's horrible to drive on the roads now also ....may get it trailered there ?.....will see ...I've not missed one in 4 years of having the car

---

The PAS needs 50amps & my tiny Altenator is only 40amp & the weight of it is 16kgs....don't need it for track days ...see see

[Matt-Rallye]

No heater

Real men don't need a heater

So aiming for 300bhp/ton with sequential box? I call shotgun on another run at pugfest in that setup!!! :love:

Not 100% about my car at Pugfest next year Matt ?
25mm torsion bars & rear 600/320 dampers & still no power steering isn't going to make it pleasent & last years was bad enough !

I'm setting it up more for Combe / Cadwell / Oulton track m8 ...100% doing latter two mid next year

How come still no PAS? dude your car rocked the hill this year and im sure provided the best soundtrack of the day!  be a shame not to see it there next year.

I may do but it's horrible to drive on the roads now also ....may get it trailered there ?.....will see ...I've not missed one in 4 years of having the car  

Best not break a habit

Bonus of trailer also means you don't have to worry about driving there or driving home!

[Day666]

100% YES Matt....

[Day666]

Small update ...
Just ordered the very first pair of Carbon/ Kevlar mix complete 306 doors from Maxi Motorsport / Tony Palfrey owner ...
Contact him on https://www.maximotorsport.com/


Amazing bloke who's twisted the arm of the company who only ever make them in GRP ....Colin Satchell & Dean Gammon have his doors in Carbon / Kevlar mix for both there 106s amazing quality

So 8wks time a set of doors should save me 40-50 kgs as I'm using winders & glass at mo ...my doors will be up for sale complete if anybody's interested?


Also getting my rear 205 group A dampers Revalved by Bilstein to take my 25mm Torsion Bars ...I've acquired ...

---

Small update again

Well because of the Carbon / Kevlar doors coming I've decided to go the full job & order a full set of Carbon door cards ....the difference with these front ones from France from the Carbon ones Twangy made me is the ones Via Tony Palfrey are shaped all around the sides & im thinking this may help stiffen them up even more ?
Wil Declaudio now has 106 ones that look unreal from Tony also


https://www.maximotorsport.com/products....or%20Cards

---

Also full Carbon F2000 spoiler ordered & coming ....from Tony Palfrey link above

[Eeyore]

so much carbon... D:

[Day666]

so much carbon... D:

Nearly all of it will be sprayed as the Fibreglass Bonnet & tailgate have  

I'm sure you know I'm fitting it for weight saving ...NOT For looks as I do with most things ....it's going to save over 40kgs with Hard shell windows & I'm sure your aware that Carbon / Kevlar is less flexible than fibreglass ....& better on impacts  

[Day666]

Big thank you to those that voted for me for Petrol of the Year award

[Day666]

Not posted for a while ....
Kevlar/ carbon composite doors & Carbon Fibre door panels have arrived & ive been working on Passenger side first ...
They have alloy 8mm plates I've had to drill through that are sandwiched between Kevlar where hinges bolt for extra strength...
It was a ballach getting the hinges located in 95% correct height as no real template from original doors matched ...I got them just out height wise by 5mm meaning I had to drill x4 more holes again ...no big issue ....amazingly & im shocked the doors fit as good originals & are even stiffer at the top where the thieves normally bend them out...
I'm going to be running Polycarb AR windows with 210mm square sliders bonded & bolted to the front doors & the size is much smaller than standard Polycarbonate standard door windows so I've made a template without opener just to make sure they are 100% made right all pics below

---

Not posted for a while ....
Kevlar/ carbon composite doors & Carbon Fibre door panels have arrived & ive been working on Passenger side first ...
They have alloy 8mm plates I've had to drill through that are sandwiched between Kevlar where hinges bolt for extra strength...
It was a ballach getting the hinges located in 95% correct height as no real template from original doors matched ...I got them just out height wise by 5mm meaning I had to drill x4 more holes again ...no big issue ....amazingly & im shocked the doors fit as good originals & are even stiffer at the top where the thieves normally bend them out...
I'm going to be running Polycarb AR windows with 210mm square sliders bonded & bolted to the front doors & the size is much smaller than standard Polycarbonate standard door windows so I've made a template without opener just to make sure they are 100% made right all pics below

---

Hinges

---

Door side view

---

Lock cut out

---

Trial fitted on my m8s scrap 306 ...fits so well

---

100% Kevlar / carbon mix ...good to know
Each door weighs 6.3kgs instead of 27kgs each standard ones so 40kgs ish saving

[hovis16]

Door cards look pimp mate

[Day666]

Thank you

---

They has built in ashtray closers as handles

---

Completely shaped to fit around the sides of the doors

[Eeyore]

Cant wait to see them fitted

[rocker8742]

This build is awesome mate, can't wait to see what they're like fitted

Any idea about total weight after you swap the doors?


Sent from my iPhone using Tapatalk

[Day666]

This build is awesome mate, can't wait to see what they're like fitted

Any idea about total weight after you swap the doors?


Sent from my iPhone using Tapatalk

I will hopefully get it finished June / july ..hopefully
I recon 800kgs maybe just over ?

It's producing with Sandys full race engine 289bhp N/A power ..
And last time I weighed it it was 867kgs & the doors have taken 41kgs off that & 13kgs for the dash & 6kgs for smaller battery ....