Pic heavy 2yr Build Gti6 road & track

[Piggy]

Yeah I knows whats dry sumped.

Just not heard of accusump!

---

But thanks man...good explanantion

[welshpug]

dry sumps aren't that much, about £1800 or so.

[Day666]

Those accusump kit's are an impressive little gadget! Where will you be mounting yours?

Inside the car under my FG dash on passenger side where lower glove box was ...that way I can reach it & turn it on/off & see the gauge

I'll have it fitted tomorrow & post a picture m8

---

Getting there ...loads to do & Mapping Thursday down SBs ...

---

24hrs left

[miles]

Noo, Pet hate with those cooler hoses I'm afraid

Is that a push on connection? hard to tell from the pic,

Otherwise bloody well done for doing it so quick

[Piggy]

Surely concern over those oil hoses going under the lower panel...ie hitting the floor!

[Day666]

Surely concern over those oil hoses going under the lower panel...ie hitting the floor!

No bumper skirts lower by 1inch

[welshpug]

bumper will bend

[Piggy]

bumper will bend

Thats what I was thinking.

I have a 2" splitter...but it dont half move about

[Toms306]

You're not leaving that filter upside down are you?

I also wouldn't put the cooler hoses under there, look at the wiring loom casing there, it's always scuffed!

[Piggy]

Haha...my ocd spotted that too tom!

[Piggy]

Haha...my ocd spotted that too tom!

[Xsikid]

Haha...my ocd spotted that too tom!

Wow double O C D there Piggy !!

[Day666]

No the pipes for the oilCooler will be changed to Stainless Goodridge when I have the cash & im then going to be turning the oil cooler up the other way so Connections are on top...

It's all about getting the car mapped at Sandys today & then I can sort other things out before FCS  


Right got some second hand Leads off Spooxs for £45 ....they didn't have 6 ones new in stock & they were £100 WoW !
They took them off a car they were stripping & sent them to me ...lucky I rang them ....they are a little longer than 6 ones but fit amazing & click securely into spark plugs & sockets & Coilpack ..

---

Reddddd

---

Got to love a smart set of leads ....better than the Mickey Mouse Corsa ones fitted that were loose as anything

[Day666]

Car mapped today by the Engine builder himself Sandy Brown ..
Welshpug & others on here know Sandy so if I'm lying I'll get found out ....

After Mapping Sandy said ...Quote It's the most powerful 2.0 litre I've ever built

Over 280 at the flywheel

Over 200 at the wheels at only 6000

Rev limit set to 8800


Hes a genius

[zx_volcane]

Car mapped today by the Engine builder himself Sandy Brown ..
Welshpug & others on here know Sandy so if I'm lying I'll get found out ....

After Mapping Sandy said ...Quote It's the most powerful 2.0 litre I've ever built  

Over 280 at the flywheel

Over 200 at the wheels at only 6000

Rev limit set to 8800


Hes a genius  

holy sh$t !

can't wait to see this beast at FCS

[Matt]

It gets better every time I open this thread! Can't wait to see it at fcs, epic power figures there! Bet you're well pleased

[Day666]

Thank you & YES Soo pleased ...there is a but ....just went for a 4mile test drive & the clutch & non power steering is beating the shit out of me ....I'm sure I'll get used to it or that clutch will go external Hydralic clutch as the cable even with metal ends is taking a lot of pressure at mo...

Also as I've already said Sandys figures are always conservative & spot on ...not over the top bullshit..... to the paying customer  

[Day666]

Video  
Have 30 more ....
Believe me that induction sound is crazy loud my phone couldn't take it ...the exhaust was great but even with Eardefenders it was ear piercing !

https://vimeo.com/168234889

Engine mounts are sorted no movement at all

[cully]

....just went for a 4mile test drive & the clutch & non power steering is beating the shit out of me .

To finish first First you must finish!
I will wave as i pass you at combe while your in the pits panting and grabbing water

MTFU! and learn to drive again

Nice work Mr can't wait to look over it

[ozonehostile]

Ahh that's such a great noise

---

What exhausts on it at the moment btw?

[tim 306td]

Jesus love the sound of that. Any 0 to vids?

[Day666]

This one over 280bhp at the flywheel & 200 at the wheels at only 6000rpm

Rev limit hit 8800 here & crazy induction noise

https://vimeo.com/168243552

---

Ahh that's such a great noise

---

What exhausts on it at the moment btw?

Maniflow 4-2-1 exhaust manifold & Mike the pipe rear 2.5 twin box straight through ...it's the induction Jenvey 48s you can hear ...twice as load as the Exhaust

[ozonehostile]

This one over 280bhp at the flywheel & 200 at the wheels at only 6000rpm

Rev limit hit 8800 here & crazy induction noise  

https://vimeo.com/168243552

---

Ahh that's such a great noise

---

What exhausts on it at the moment btw?

Maniflow 4-2-1 exhaust manifold & Mike the pipe rear 2.5 twin box straight through ...it's the induction Jenvey 48s you can hear ...twice as load as the Exhaust

 Aha I can definitely believe that, watched a bodied 205 Xu10 going through scrutineering at a rally, 120db at the front and only 80db out of the exhaust haha 

Did you have any clearance issues with your satchshift and the maniflow manifold?

[Day666]

This one over 280bhp at the flywheel & 200 at the wheels at only 6000rpm

Rev limit hit 8800 here & crazy induction noise  

https://vimeo.com/168243552

---

Ahh that's such a great noise

---

What exhausts on it at the moment btw?

Maniflow 4-2-1 exhaust manifold & Mike the pipe rear 2.5 twin box straight through ...it's the induction Jenvey 48s you can hear ...twice as load as the Exhaust

 Aha I can definitely believe that, watched a bodied 205 Xu10 going through scrutineering at a rally, 120db at the front and only 80db out of the exhaust haha 

Did you have any clearance issues with your satchshift and the maniflow manifold?

No but it's a Sandy designed early days one ....hits everything else though ...I think Stevie wonder made it ...Sandy said that's why Mike Edwards does his pipework now ....it's ok for the time being ....

[Day666]

Thanks guys

[Piggy]

Looks ok...

Sounds like a symphany of unicorns orgasming

[Day666]

Yet another ...

https://vimeo.com/168306668

[Day666]

Two more nights & ready for Friday afternoon shake down testing at Combe before Sat  

Fingers crossed as I'm not taking any tools or Van this year

[Piggy]

Most excited about saturday because of your car...dont break it friday!

[Day666]

Most excited about saturday because of your car...dont break it friday!

Big Thank you Piggy

It's going to be interesting