306 rallye trackday project

[RetroPug]

This is probably one of my favourite projects on the forum as the CF is all homebrew moulds. Can't wait to see this in action.

[twangy]

This is probably one of my favourite projects on the forum as the CF is all homebrew moulds. Can't wait to see this in action.

thanks very much , will let you no when its out on track , and hopefully will do some club days next year , theres still a bit to do before that eg mapping  , and finishing paintwork and graphics , also after cams  ,but will let you no as soon as out on track ,thanks wayne

[Midnightclub]

Airbox looks awesome, reminds me quite a bit of the airbox on the maxi rally car

[twangy]

Airbox looks awesome, reminds me quite a bit of the airbox on the maxi rally car

thanks mate

[insomaniac45]

those things are going to suck better than a turbo charged hoover,

the air box look epic, good job. Just think of all that lovly cold air being pushed through the gap straight into your jenvys

Are you running unfiltered? or will your at least put a pre screen on?

[twangy]

those things are going to suck better than a turbo charged hoover,

the air box look epic, good job. Just think of all that lovly cold air being pushed through the gap straight into your jenvys

Are you running unfiltered? or will your at least put a pre screen on?

cheers mate , yes will be running a filter  just haven't had time to order or fit , should get plenty of cold air to jenveys like you say

[Magenta Sunset]

how do you get the CF to cure?

[twangy]

how do you get the CF to cure?

hi m8 , its basically like doing fibre glassing , with resin

[insomaniac45]

only difference to CF to FG is your using Carbon Fiber matt as the medium


its used alot in the RC plane world

[Magenta Sunset]

reminds me.
must make a start on dash binnacle sometime - - -

[twangy]

finished air box and made and fitted filter as ramair supplied me with  filter caging and filter foam for a bargain price of £15  next day delivery , and best of all enough to make a spare 1 , , total bargain

[twangy]

finally got round to  priming and painting carbon fibre door and lower quarter  were rub strips removed , and started fitting graphics

[twangy]

carbon  n/s door all now fitted up , and made a start on dropping front cross member as  am seam welding it  so removed and started to grind down ready for welding

[DemonDriverDan]

Can you post photos as you do the seam welding? I want to do it on mine when I get my welder sorted

[C2K]

Look at my project thread Dan, I did it 5 years ago now.

[205dtub]

Nice build, I'll be following!

[twangy]

seam welded subframe all painted and ready for refitting , so will refit over weekend

[twangy]

while i had subframe stripped off, took some photos of rosejointed gear linkage that was made  up

[twangy]

big plans for new year for the 306 ,as have started collecting a few bits over the last month , engine wise have kent cams pt81 cams and vernier pulley ,to go in engine ,will get pockets put in pistons , then strate for mapping , have new spal fan , and new race loom getting made , also after vts rack , so quite a bit to get on with

[adam b]

Get my pm about the airbox, Wayne?

[Blandy]

Wow that airbox is awesome. Cracking project

[twangy]

Get my pm about the airbox, Wayne?

hi adam , yes did get pm about airbox  ,but would not let reply , did try and message on the gti forum , i am going to try and make a load of item in new year mate , so will keep you posted

---

Wow that airbox is awesome. Cracking project

thank mate

[Iaitoo]

Custom work is insane! Fantastic.

[twangy]

Custom work is insane! Fantastic.

thanks very much

[twangy]

started stripping front end of car ,, as need engine out ready to go to engine builders ,  and why engine getting done can make

new light weight  race car loom and freshen up front end

[twangy]

    [took delivery of pt81 kent cams and vernier pulleys , ready for engine wich will be getting built in next month

[roland rat]

Read the thread from the beginning and I have to say there's some awesome fabrication gone on in this build,well done!

[twangy]

Read the thread from the beginning and I have to say there's some awesome fabrication gone on in this build,well done!
cheers  mate

[7057sam]

Looking really good mate

What size cooler do you run Ive had to move up to a 19 row as the 16 wasn't really up to it.

[twangy]

Looking really good mate

What size cooler do you run Ive had to move up to a 19 row as the 16 wasn't really up to it.

sam  ,only using 13 row cooler on car  , had no problems yet , but am on remote filter so does hold bit more oil and big rad for extra cooling  ,