Posts: 866
Threads: 61
Joined: Dec 2011
Reputation:
4
Thanks: 0
Given 6 thank(s) in 5 post(s)
Hi guys I have a few issues with my 205 on cold startup in the mornings it puffs out quite alot of smoke and doesn't idle once it has run for a minute or so it is fine for the rest of the day. I have had all new fuel lines and brand new jubalee clips and the cold start on the pump is connected and working fine does anyone have any ideas??
Posts: 6,367
Threads: 87
Joined: Dec 2011
Reputation:
48
Location: South Yorks.
Car Model/Spec: Rouge vallelunga 5 door Dturbo
Thanks: 2
Given 74 thank(s) in 70 post(s)
You run veg at all?
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Posts: 866
Threads: 61
Joined: Dec 2011
Reputation:
4
Thanks: 0
Given 6 thank(s) in 5 post(s)
I have ran some veg but have always ran 20L of derv to 10L of sunflower oil
Posts: 6,258
Threads: 371
Joined: Feb 2014
Reputation:
29
Location: suffolk
Car Model/Spec: ford fiesta
Thanks: 4
Given 82 thank(s) in 82 post(s)
Glow plugs good?
On a break from 306oc for personal reasons. If anyone needs or wants me most of you have my number and or facebook messenger
Thanks for the good times guys n gals. I might be back. Who knows.
Posts: 866
Threads: 61
Joined: Dec 2011
Reputation:
4
Thanks: 0
Given 6 thank(s) in 5 post(s)
Changed them to about 5 months ago to a brand new ngk set
Posts: 866
Threads: 61
Joined: Dec 2011
Reputation:
4
Thanks: 0
Given 6 thank(s) in 5 post(s)
When it's cold it smokes white and doesn't idle, when it's warm it's absolutely fine no smoke(well I puff of black). I'll have a look at the glowplugs when I get a chance. Also I have an audi tt inline filter and have got rid of the standard filter setup if that makes any difference
Posts: 1,833
Threads: 91
Joined: Dec 2011
Reputation:
12
Location: Wrexham
Car Model/Spec: 306 D Turbo
Thanks: 0
Given 0 thank(s) in 0 post(s)
I would check that the glow plug rail is getting power using a meter first. If it is then check the timings for it and make sure it is kicking in and out when it should. If that's working you will have to meter out each plug in case a couple have died prematurely.
Supercharged XUD Project - Dead
Posts: 357
Threads: 11
Joined: Dec 2011
Reputation:
5
Thanks: 0
Given 2 thank(s) in 2 post(s)
on mine the cold start device has seized and dosnt work at all is your defently working check the cold start lever position when its hot also when its cold in the morning before you start the engine see if the lever has moved.