Breaking: BREAKING Silver ph2.5 GTi6 - Somerset

[Dangti6]

I'm breaking a 1999 Ph2.5 Titanium silver GTi6. The car has done a shade under 112k miles.

I shall be attending Pugfest in a couple of weeks and can take parts with me for collection. Delivery on most items is no problem at competitive prices.

All parts are available so just ask if you require something I've not listed. A basic list below.


Engine/Suspension

Engine SOLD
Gearstick SOLD

Gearbox £50
Unlocked ECU for 205/309 use £50
Stainless exhaust system with standard cat attached £100
Rear beam complete minus calipers £100
Air feed snorkel £10
Fuel pump £15
Battery box with ECU lid (no main lid) £10
Battery top clamp £5
Hubs (18mm) complete with ABS sensors. Round BJ holes £40
Crank sensor £10
GTi6 front brake calipers with sliders £45
Standard shocks and springs £20
Inertia switch £5
Fuel pump relay £10
Heater matrix hoses £5
OE wishbones ideal donors for roller bearings £15 pair
Master cylinder £15
Fans and cowling (complete with relays) £20
Steering rack (no ram) £15
Driveshafts with good boots £40 pair
Subframe £15



Panels/exterior:

Cyclones SOLD
Crystal headlights SOLD
Roof strips SOLD

Crystal fogs £25 pair
Frosted fogs £10 pair
Front bumper £40
Rear bumper. Scratched on lower left £10
Wings £10 each
Sideskirts £30 pair
Doors with motors and handles £20 each
Ph3 bonnet £30
Ph 3 Tailgate with wiper motor. Small rust spot £30
Ph3 spoiler (faded) £20
Ph2 spoiler (faded) £10
Grill £10
Hockey sticks £5 pair
Rear lights £10 pair
Front wiper motor £10



Interior

GTi half leather/alcantara interior £25 set
Ph3 door cards £20 pair
Black A/B/C pillar trims £30
Rear quarter cards £20
Carpet £10
Indicator twin optic light/fog stalk £10
Wiper stalk £5
Steering wheel with ph3 airbag in average condition £15
Ph3 stealth parcel shelf with speakers £20
Heater motor £10
Silver centre console and vents £15
Clocks with 112,000 miles £10
Dashboard £10
Handbrake centre console and cubby box and ashtray £5
Steering column cowling £5
Radio control stalk £5
Interior mirror covers £5 pair
Visors £5 pair
Auto windscreen sensor £5
Clock/temp display £5
Heated rear screen/hazard switch £5 pair
Set of seatbelts, complete £10
Door shut looms £10 each


All prices are excluding delivery.

[hovis16]

May have this box off you will let you no by monday

[Dangti6]

No problem, let me know.

[Dangti6]

Bump

[hovis16]

Hey dan i'll have the gearbox please will collect from plug fest

[powerandtorque]

How good is the front bumper Dan? Any marks/damage and are the plastic pieces underneath snapped?

Might possibly be interested in the passenger front wing and bonnet too depending on condition and what sort of deal you're willing to do for the lot.

Also, just to confirm that this is paint code EYCC?

[iigodiix]

Will the calipers for the front go on a 306 hdi? I have 283mm discs

[Dangti6]

Hey dan i'll have the gearbox please will collect from plug fest

If you pay beforehand that's fine.

How good is the front bumper Dan? Any marks/damage and are the plastic pieces underneath snapped?

Might possibly be interested in the passenger front wing and bonnet too depending on condition and what sort of deal you're willing to do for the lot.

Also, just to confirm that this is paint code EYCC?

Bumper isn't 100%. It has a few marks. The plastic strips underneath are snapped as usual.

The paint code is EYC. I compared the grill against my Ph3 silver HDi and couldn't notice a difference, but that's not to say there isn't.

And saying that, my EYCC ph3 has a EYC rear bumper fitted from a breaker I had years ago. I didn't realise until I just checked both that they were a different code and it never crossed my mind as it doesn't look any different.

I'd happily do a deal.

Will the calipers for the front go on a 306 hdi? I have 283mm discs

Yeah they will fit a HDi. Do you have 15"+ wheels?

[Dangti6]

Pugfest collection bump

[Curt]

I'm after a NSF carrier and slider if you have them?

[Dangti6]

I'm after a NSF carrier and slider if you have them?

The calipers went this weekend I'm afraid.

[Dangti6]

Bump

[Mitch1793]

will the rear beam fit a HDI? what nick is it in?

[Dangti6]

Yes it would. It's in useable nick with no visible camber. Same old story with beams, you don't know what condition they are in until you strip them down for a rebuild.

[Dangti6]

Boing.

[Dangti6]

Bump

[ginge191]

The exhaust; make?
And pics of door cards please

[Dangti6]

Exhaust was listed seperately and has gone. I shall update the original list shortly.

I do have a 4" Magnex system available though.


Door card pics:

[ginge191]

Pm me magnex pics fitted and a combined postage price on the door cards and exhaust pretttty please!