Breaking: Phase 1 Cherry 3 Door DTurbo

[silverzx]

Please ask if anything is wanted.

Most bits available (excluding engine).

Postage available on everything providing cost is covered.

Here's a few bits I have, please feel free to make offers on everything, first car I've "Broke" so not sure what everything is worth to be honest.

TMIC x 2 - £10 each
TMIC > Turbo pipe - £10
Phase 1 DT Exhaust (has de-cat) - £40
Phase 1 DT Clocks - £30
Phase 1 Top Glove Box - £30
Phase 1 Stalks (lights & wipers) - £5 each
Phase 1 3 door rub strips - Provisionally Sold
PHase 1 XUD fans - £10
XUD Valeo Clutch (used, but didn't slip out of car removed from) - £15
XUD Fly wheel - £15
XUD pressure plate - £5
XUD Alternator - £15
XUD Gearbox - £40
Phase 1 DT Gearknob & cover - £3.50
eBay Used Cone Filter & inlet pipe - £5
Phase 1 front end (bonnet, slam panel, bumper, headlights, side lights, grill) - £100
Phase 1 rear bumper - £40
Phase 1 manual wing mirrors - £30

A few pictures of some of the bits:

[Curt]

How much for the O/S/R light, posted?

[silverzx]

How much for the O/S/R light, posted?

£15 posted sound acceptable?

[devils_fuel]

Finally broken then mate

Free bump as well

[mr_fish]

Been busy? Haha

Also free bump

[anto]

Stop breaking phase 1's!!!!!!!!:'(

[silverzx]

Finally broken..

And the engines going in..

[silverzx]

Bump!

[Matt]

centre console, the bit where keypad imobiliser goes. price posted?

[silverzx]

BUMP - offers on everything.

Will probably do a mass clear out soon so feel free to make me offers.

[devils_fuel]

Ha ha dad wants you to clear the yard

[RetroPug]

Is the clock in the centre-console a non-temperature display one, and fully-working etc?
If so, 6 pounds posted sound ok?

[silverzx]

Is the clock in the centre-console a non-temperature display one, and fully-working etc?
If so, 6 pounds posted sound ok?

Can't remember and can't remember.

It's a proper phase 1, D8A, phase 1 steering wheel, no immobiliser pad so if the phase 1's are non-temperature then that is what it'll be.

£6 posted is fine.

If it doesn't work / isn't what you were expecting I'll refund you (which is probably more hassle then its worth, but if it helps you out, so be it)!

[RetroPug]

Is the clock in the centre-console a non-temperature display one, and fully-working etc?
If so, 6 pounds posted sound ok?

Can't remember and can't remember.

It's a proper phase 1, D8A, phase 1 steering wheel, no immobiliser pad so if the phase 1's are non-temperature then that is what it'll be.

£6 posted is fine.

If it doesn't work / isn't what you were expecting I'll refund you (which is probably more hassle then its worth, but if it helps you out, so be it)!

Ok thanks. Could you have a look at the bottom of the mirrors if you've still got them?
The temperature sender is a little plastic round thing on the bottom of one of them. If it didn't have one of those I reckon it will be non-temp.

Just need it to be non-temp really.