MG ZR: Cams & Maps

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
MG ZR: Cams & Maps
Oops wrong Allie, Allie = Ladysteve . Although havent seen Alee for a while either, maybe a small meet is in order try and find some good driving roads now the weather seems to be getting a bit better
[Image: mcetg0.png]

ZR VVC Homebrew mapping project: http://306oc.co.uk/forum/showthread.php?tid=14360
Reply
Thanks given by:
Ye defo need a meet
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
My ears are burning!! Big Grin
[Image: Sig3_zpscd005eb1.jpg]
Reply
Thanks given by:
(24-02-2014, 05:33 PM)Alee83 Wrote: My ears are burning!! Big Grin

Eyup how's it going dude
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
(24-02-2014, 06:17 PM)karl1989 Wrote:
(24-02-2014, 05:33 PM)Alee83 Wrote: My ears are burning!! Big Grin

Eyup how's it going dude

Not bad matey!! Long time no see...
[Image: Sig3_zpscd005eb1.jpg]
Reply
Thanks given by:
(24-02-2014, 06:31 PM)Alee83 Wrote:
(24-02-2014, 06:17 PM)karl1989 Wrote:
(24-02-2014, 05:33 PM)Alee83 Wrote: My ears are burning!! Big Grin

Eyup how's it going dude

Not bad matey!! Long time no see...

Ano mate been busy sorting unit and escort ect. Fancy a smooth front end on the rallye Smile
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
(24-02-2014, 09:16 PM)karl1989 Wrote:
(24-02-2014, 06:31 PM)Alee83 Wrote:
(24-02-2014, 06:17 PM)karl1989 Wrote: Eyup how's it going dude

Not bad matey!! Long time no see...

Ano mate been busy sorting unit and escort ect. Fancy a smooth front end on the rallye Smile

Hey what ya got?
[Image: Sig3_zpscd005eb1.jpg]
Reply
Thanks given by:
(25-02-2014, 12:19 PM)Alee83 Wrote:
(24-02-2014, 09:16 PM)karl1989 Wrote:
(24-02-2014, 06:31 PM)Alee83 Wrote: Not bad matey!! Long time no see...

Ano mate been busy sorting unit and escort ect. Fancy a smooth front end on the rallye Smile

Hey what ya got?

Bonnet and grill smoothed just needs wrapping in red for your car?
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
(25-02-2014, 07:36 PM)karl1989 Wrote: Bonnet and grill smoothed just needs wrapping in red for your car?

Is it a phase 3 bonnet?

Sorry for the thread hi-jack Steve... Big Grin
[Image: Sig3_zpscd005eb1.jpg]
Reply
Thanks given by:
Sure it is. Look at my forsale thread. Comments there
Venetian XUD ph2 heaven
Ph3 perv cab heaven
Black ph1 XUD died

Moonstone hdi stage 2
Reply
Thanks given by:
Haha no worries Alee

Plans:
-Currently looking into a gearstick UJ modification at the moment as the gearstick is quite sloppy so doesnt help for sporty shifts. lol
-Ordered galletto to get the map file off
-Does anyone in the area have a torque wrench that goes to 10nm? Saves me buying one to use once for the cam ladder

Question
When pulling away sometimes it feels like it's wheel spinning but it's not, any ideas?
[Image: mcetg0.png]

ZR VVC Homebrew mapping project: http://306oc.co.uk/forum/showthread.php?tid=14360
Reply
Thanks given by:
Clutch slipping?
[Image: Ty8kl7b.jpg]
Reply
Thanks given by:
That's what my first thought but the revs arn't going up and the speed isnt, its more like the shaking feeling of wheel spinning without the wheels spinning
[Image: mcetg0.png]

ZR VVC Homebrew mapping project: http://306oc.co.uk/forum/showthread.php?tid=14360
Reply
Thanks given by:
Engine mounts knackered?

10nm is like little finger tight...be surprised if there is a torque wrench which is accurate to such a small amount
Wishes for more power...
Reply
Thanks given by:
You can buy mini torque wrenches that operate solely within that range and are no good for large torques.
This post is an artistic work of fiction and falsehood. Only a fool would take anything posted above as fact.

62k Diablo Phase 1 Gti-6:
Project Thread
Reply
Thanks given by:
This is one that operates at that level, it just seems like alot for a one use thing but I dont want to go 'she'll be rit' when dealing with camshafts
http://www.ebay.co.uk/itm/DRAPER-3-8-ADJ...5d2b34f6d5
I'll give the engine mounts a shake later, would powerflex tighten it up without making the car unlivable? Don't quite understand the stiffer engine mount business

Who changed the thread name! lol
[Image: mcetg0.png]

ZR VVC Homebrew mapping project: http://306oc.co.uk/forum/showthread.php?tid=14360
Reply
Thanks given by:
(26-02-2014, 11:49 AM)lolsteve Wrote: Who changed the thread name! lol

ninja
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Reply
Thanks given by:
lmao lmao lmao
This post is an artistic work of fiction and falsehood. Only a fool would take anything posted above as fact.

62k Diablo Phase 1 Gti-6:
Project Thread
Reply
Thanks given by:
Love it...! Big Grin

If you want me to borrow a torque wrench I can, but will have to let me know an exact time to get it as will need to be back at work...
[Image: Sig3_zpscd005eb1.jpg]
Reply
Thanks given by:
Definitely get a 6 not being biased or anything Dodgy
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:
(26-02-2014, 01:46 PM)Mattcheese31 Wrote: ninja
yyyouuuuuuu!

(26-02-2014, 04:55 PM)Alee83 Wrote: Love it...! Big Grin

If you want me to borrow a torque wrench I can, but will have to let me know an exact time to get it as will need to be back at work...
Amazing cheers Smile I'd only need it to put stuff back together so a day or two at most. Now just a case of getting it apart :/

(26-02-2014, 06:42 PM)7057sam Wrote: Definitely get a 6 not being biased or anything Dodgy
No chance, I hear those 6's and XUD's have terrible headgasket problems
[Image: mcetg0.png]

ZR VVC Homebrew mapping project: http://306oc.co.uk/forum/showthread.php?tid=14360
Reply
Thanks given by:
Well as soon as you need it let me know and I will get it from work...
[Image: Sig3_zpscd005eb1.jpg]
Reply
Thanks given by:
Cheers man appreciate it Big Grin
[Image: mcetg0.png]

ZR VVC Homebrew mapping project: http://306oc.co.uk/forum/showthread.php?tid=14360
Reply
Thanks given by:
(26-02-2014, 07:01 PM)lolsteve Wrote:
(26-02-2014, 06:42 PM)7057sam Wrote: Definitely get a 6 not being biased or anything Dodgy
No chance, I hear those 6's and XUD's have terrible headgasket problems

Rofl

True story!
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



Reply
Thanks given by:
The injector bolts of my mercedes are supposed to be tightened to 7nm. I didn't know that when I did it. Or have a torque wrench so I just tightened them up loads which probably isn't ideal but oh well
Reply
Thanks given by:
Haha yeah ive been through 2 engine done 0 miles lol

I've found a guy who break axsara vts' s engine's are much lower mileage but yeah they a ticky time bomb

I've seriously though about a civic type r ep3 getting cheap now under 2k easy. 197bhp with lsd with a few mods be as quick as a low boost
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:
I could probably get away without a torque wrench but for piece of mind I'd like to have one so I don't overtighten or have cams fly off at 7k lol

Spent some time at the scrappy today hunting for a part to help solve the sloppy gearstick problem. 1 hour, several cuts and £10 later and we have ourselves a steering rack UJ to replace the gearbox UJ
[Image: mcetg0.png]

ZR VVC Homebrew mapping project: http://306oc.co.uk/forum/showthread.php?tid=14360
Reply
Thanks given by:
you pocket any odds and sods for it?
Reply
Thanks given by:
Remmber going to the scrappy with mates after college every friday and checking every car for aftermarket door speakers lol
[Image: Cn91r40h.jpg] 
Astor 6 Fast road/track project
Reply
Thanks given by:
Nuff said

[Image: DSC_0190-Copy_zpsf093f84d.jpg]
Member of 99% warning or your nothing club!

Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 39 Guest(s)