Posts: 4,604
Threads: 90
Joined: Dec 2011
Reputation:
54
Location: Cornwall
Car Model/Spec: 1996 306 DT M-TDI/16
Thanks: 0
Given 20 thank(s) in 18 post(s)
Bit of a random one...
What is the situation on pressed plates these days... Are there any proper decent looking pressed plates that are legal to run with on the road in the UK? Or is any form of pressed plate dodgy these days?
Where is the best place to aqquire good quality ones? Had a cheapy set off some dodgy website once before but they looked a bit dull / crappy after a few months...
Thanks for any thoughts..
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |
![[Image: sigi-2.png]](http://i281.photobucket.com/albums/kk226/darrenjlobb/sigi-2.png)
Posts: 2,526
Threads: 143
Joined: Dec 2011
Reputation:
10
Location: South East London
Car Model/Spec: Ph3 XUD
Thanks: 1
Given 8 thank(s) in 8 post(s)
Legal, I researched it after a chat with an over zealous officer (who was wrong).
https://www.craigsplates.com/
It was either them or the other popular one I got mine from. Reflective, post coded and BSAU markings.
Posts: 19,854
Threads: 581
Joined: Dec 2011
Reputation:
195
Location: Bournemouth
Car Model/Spec: Supercharged 306 GTi6
Thanks: 36
Given 82 thank(s) in 78 post(s)
Grey area. The BS states they should be made of plastic and whilst the BS isn't law, it's basically as good as.
All over criteria are covered with most pressed plates now. Reflective background, correct don't (don't get a French looking one. They look shit), correct colours, BS stamp and postcode of where they came from.
I've had mine on almost a year now and no one has said anything. Tbh you wouldn't know they were pressed unless up close.
Team Eaton
1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Posts: 15,646
Threads: 541
Joined: Dec 2011
Reputation:
124
Location: Aylesbury
Car Model/Spec: 320bhp Impreza WRX
Thanks: 7
Given 59 thank(s) in 58 post(s)
20-02-2014, 02:16 PM
(This post was last modified: 20-02-2014, 02:17 PM by Dum-Dum.)
(20-02-2014, 02:11 PM)Niall Wrote: Grey area. The BS states they should be made of plastic and whilst the BS isn't law, it's basically as good as.
All over criteria are covered with most pressed plates now. Reflective background, correct don't (don't get a French looking one. They look shit), correct colours, BS stamp and postcode of where they came from.
I've had mine on almost a year now and no one has said anything. Tbh you wouldn't know they were pressed unless up close.
Nah the law says they must conform to BS.
I couldn't find the bit in BS that says they have to be plastic, think it might of been repealed but I don't know.
I think a police officer would be hard pushed to prosecute you if they were correct size, colour, font, spacing, reflective and had the appropriate BS and makers marks.
Posts: 19,854
Threads: 581
Joined: Dec 2011
Reputation:
195
Location: Bournemouth
Car Model/Spec: Supercharged 306 GTi6
Thanks: 36
Given 82 thank(s) in 78 post(s)
Yeah it was a few years ago that I saw the extract saying they had to be plastic but this may have changed. I would imagine the only reason why is for pedestrian safety (the edges can be rather sharp!) but that's their problem, not yours lol
Team Eaton
1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Posts: 3,419
Threads: 120
Joined: Jan 2014
Reputation:
35
Location: Powys / Herefordshire
Car Model/Spec: Rallye/S16 & 175 megane
Thanks: 147
Given 40 thank(s) in 40 post(s)
Pressed plates are legal as long as they have a euro mark, a postcode and say GB on the side.
French & German 'style' pressed plates are illegal unless on a french / german registered car.
Posts: 19,854
Threads: 581
Joined: Dec 2011
Reputation:
195
Location: Bournemouth
Car Model/Spec: Supercharged 306 GTi6
Thanks: 36
Given 82 thank(s) in 78 post(s)
(20-02-2014, 02:26 PM)Matt-Rallye Wrote: Pressed plates are legal as long as they have a euro mark, a postcode and say GB on the side.
French & German 'style' pressed plates are illegal unless on a french / german registered car.
Wrong. You don't have to have the euro logo at all. Can have plain plates if you so wish.
Team Eaton
1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Posts: 3,419
Threads: 120
Joined: Jan 2014
Reputation:
35
Location: Powys / Herefordshire
Car Model/Spec: Rallye/S16 & 175 megane
Thanks: 147
Given 40 thank(s) in 40 post(s)
By 'Euro' Mark i mean the little BS stamp kite thingy.
I had a fine for having pressed plates on one of my old cars. Officer was a complete tosser about it and so i reserched it some more.
Posts: 19,854
Threads: 581
Joined: Dec 2011
Reputation:
195
Location: Bournemouth
Car Model/Spec: Supercharged 306 GTi6
Thanks: 36
Given 82 thank(s) in 78 post(s)
Ah ok. Sorry I thought you meant the blue bar down the left hand side with the euro logo on it.
Yeah you have to have the BS stamp on it.
Team Eaton
1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Posts: 4,135
Threads: 78
Joined: Dec 2011
Reputation:
49
Location: Chichester
Thanks: 0
Given 0 thank(s) in 0 post(s)
I've had pressed plates from Craigsplates for about 4 years now without issue. I replaced the rear with one from eBay which was just as good quality and has all the correct stuff on it, didn't have to send documents off and they were about half the price, too.
Posts: 500
Threads: 19
Joined: Sep 2013
Reputation:
3
Location: Seaton, devon
Car Model/Spec: Ph1 black dturbo
Thanks: 0
Given 0 thank(s) in 0 post(s)
Got mine off ebay, happy with them. Didnt need to send off documents either
Posts: 4,926
Threads: 266
Joined: Dec 2011
Reputation:
18
Location: Somerset
Car Model/Spec: 205 DTurbo
Thanks: 73
Given 7 thank(s) in 7 post(s)
Sending off the V5 and drivers lisence is a bit of a ballache!
Posts: 367
Threads: 36
Joined: Sep 2012
Reputation:
2
Location: Newcastle
Car Model/Spec: PH2 Dturbo
Thanks: 0
Given 0 thank(s) in 0 post(s)
I got mine off eBay, 20.95 for the pair, comes with the correct spacing etc and has the bs stamp and postcode on. And they aren't sharp around the edges , if anything the plastic ones are sharper.
Posts: 15,646
Threads: 541
Joined: Dec 2011
Reputation:
124
Location: Aylesbury
Car Model/Spec: 320bhp Impreza WRX
Thanks: 7
Given 59 thank(s) in 58 post(s)
And this leads on to another problem! You lot all support people who make plates without the correct documentation. A law that was set up to protect you all by making it difficult for criminals to get false plates made up from a car they have seen on the internet. Because you make it profitable for them to operate illegally you keep them running. If they were only getting orders from "real criminals" it wouldn't be worth them doing it.
Just go into google images and search the colour of your car (red blue white etc), peugeot 306 and 2014 so you get stuff thats recent and still likely to be on the road.
Now in the results ignore the gumtree/ auto trader ones as they might be uninsured on a traders forecourt so you dont want to make a false plate of that reg and then look at the results that are left, most are car forum pics aren't they? Off to ebay for a £10 pair of legal looking false plates then.
Posts: 6,367
Threads: 87
Joined: Dec 2011
Reputation:
48
Location: South Yorks.
Car Model/Spec: Rouge vallelunga 5 door Dturbo
Thanks: 2
Given 74 thank(s) in 70 post(s)
(20-02-2014, 03:55 PM)Dum-Dum Wrote: And this leads on to another problem! You lot all support people who make plates without the correct documentation. A law that was set up to protect you all by making it difficult for criminals to get false plates made up from a car they have seen on the internet. Because you make it profitable for them to operate illegally you keep them running. If they were only getting orders from "real criminals" it wouldn't be worth them doing it.
Just go into google images and search the colour of your car (red blue white etc), peugeot 306 and 2014 so you get stuff thats recent and still likely to be on the road.
Now in the results ignore the gumtree/ auto trader ones as they might be uninsured on a traders forecourt so you don't want to make a false plate of that reg and then look at the results that are left, most are car forum pics aren't they? Off to ebay for a £10 pair of legal looking false plates then.
i'm sure it can't get up your arse that much mate, i mean seriously, you can buy show plates anyway, doesn't make a hapeth worth of difference imo, so for anyone interested lots of the ebay ones come stamped up correctly but you don't have to send your docs off . . . . good that they're cheap tbh as i've had a set nicked off two cars now . . .
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Posts: 15,646
Threads: 541
Joined: Dec 2011
Reputation:
124
Location: Aylesbury
Car Model/Spec: 320bhp Impreza WRX
Thanks: 7
Given 59 thank(s) in 58 post(s)
Matt it does sadly, people don't see the consequences of their actions. Lots of cars turn up on false plates that have never been reported as stolen. Its probably a London thing as there is lots more ANPR cameras here than in The North and the scrotes probably aren't as tight or stupid. There's no point stealing plates as a stolen plate pings on the ANPR just like a stolen car.
As for the ANPR you cant go anywhere in London without passing through ANPR cameras, you probably wouldn't notice as they don't tend to be as obvious as CCTV cameras.
Posts: 2,526
Threads: 143
Joined: Dec 2011
Reputation:
10
Location: South East London
Car Model/Spec: Ph3 XUD
Thanks: 1
Given 8 thank(s) in 8 post(s)
Don't always have to send documents off. I went to a local aircooled VW place who were a dealer for the plate company. They checked my documents and ordered them for me.
Posts: 6,367
Threads: 87
Joined: Dec 2011
Reputation:
48
Location: South Yorks.
Car Model/Spec: Rouge vallelunga 5 door Dturbo
Thanks: 2
Given 74 thank(s) in 70 post(s)
(20-02-2014, 04:27 PM)Dum-Dum Wrote: Matt it does sadly, people don't see the consequences of their actions. Lots of cars turn up on false plates that have never been reported as stolen. Its probably a London thing as there is lots more ANPR cameras here than in The North and the scrotes probably aren't as tight or stupid. There's no point stealing plates as a stolen plate pings on the ANPR just like a stolen car.
As for the ANPR you cant go anywhere in London without passing through ANPR cameras, you probably wouldn't notice as they don't tend to be as obvious as CCTV cameras.
yeah but all's i'm saying mate is it's still possible to order show plates that look the same at a glance, that's where your argument falls down pissed as a fart . .  x
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Posts: 4,604
Threads: 90
Joined: Dec 2011
Reputation:
54
Location: Cornwall
Car Model/Spec: 1996 306 DT M-TDI/16
Thanks: 0
Given 20 thank(s) in 18 post(s)
So the long and short of it, is no steel presed plate is "legal" in the UK?
Craigsplates say they are, but there by the book and require v5 and ID to be posted...I really dont like the idea of that...posting v5's around is a pisstake at the best of times...
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |
![[Image: sigi-2.png]](http://i281.photobucket.com/albums/kk226/darrenjlobb/sigi-2.png)
Posts: 6,367
Threads: 87
Joined: Dec 2011
Reputation:
48
Location: South Yorks.
Car Model/Spec: Rouge vallelunga 5 door Dturbo
Thanks: 2
Given 74 thank(s) in 70 post(s)
(25-02-2014, 01:34 PM)darrenjlobb Wrote: So the long and short of it, is no steel presed plate is "legal" in the UK?
Craigsplates say they are, but there by the book and require v5 and ID to be posted...I really dont like the idea of that...posting v5's around is a pisstake at the best of times...
I've read up Darren and they are legal if they have the right marks on them....I'll stand corrected if anyone can prove otherwise
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Posts: 755
Threads: 39
Joined: Jul 2013
Reputation:
4
Location: Portsmouth
Car Model/Spec: P2 Dturbo
Thanks: 0
Given 0 thank(s) in 0 post(s)
always used this guy.. good quality and come with sticky strips
http://www.ebay.co.uk/itm/Embossed-Press...27d9a17264
00' 106 Indy - Moonstone - Sold
97' 106 XT 1.6 - Mayerling Green - Swapped
95' 306 P1 DT - Onyx - Scrapped
97' 306 P2 DT - Silver - Scrapped
97' 306 P2 DT - Onyx - SORN awaiting scrap
Posts: 1,756
Threads: 79
Joined: Jun 2012
Reputation:
17
Location: Stroud, Gloucestershire
Car Model/Spec: Down and out HDi racestate
Thanks: 0
Given 0 thank(s) in 0 post(s)
Seems like they have chaned their mind about them needing to be plastic. Now just says needs to be reflective material and the characters can be 3D.
https://www.gov.uk/displaying-number-pla...ber-plates
Posts: 1,204
Threads: 195
Joined: Jul 2013
Reputation:
6
Location: Wolverhampton
Car Model/Spec: 2000 Xs 1.8 16v
Thanks: 0
Given 0 thank(s) in 0 post(s)
(25-02-2014, 02:21 PM)adamm306 Wrote: always used this guy.. good quality and come with sticky strips
http://www.ebay.co.uk/itm/Embossed-Press...27d9a17264
Who I used, fast delivery and quality
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
(25-02-2014, 02:21 PM)adamm306 Wrote: always used this guy.. good quality and come with sticky strips
http://www.ebay.co.uk/itm/Embossed-Press...27d9a17264
Yup...
Me used them too.
Spot on. Passed MOT and recent cop parking next to me!
Posts: 5,205
Threads: 91
Joined: Dec 2011
Reputation:
83
Location: Oxfordshire/Cornwall
Car Model/Spec: Moonstone DT/Volvo V50
Thanks: 2
Given 41 thank(s) in 41 post(s)
Seriously though, why do we all want pressed plates, I think they look whack for starters... Just get clean, official, new plates from a reputable source... Why bother with plates that are likely to cause you to get pulled over and attract attention...
It's like driving round with possibly dodgy HIDs in or bluey/white 'xenon style' headlights... It's just asking to get pulled and questioned... Not worth it for 'looking cool' - plenty of other mods that will make your car look different without pissing with nimberplates...
(16-05-2016, 10:45 AM)Toms306 Wrote: Oh I don't care about the stripped threads lol, that's easily solved by hammering the bolt in.  Nanstone GTD5 GT17S - XUD9TE
Volvo V50 D5 R-Design SE Sport - Daily cruise wagon.
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
I think illegal HIDs that are illegal, make you look like a chav and blind everyone, and a set of plates which are legal and which will outlast any horrible plastic sticky backed ones is quite a odd comparison Ruan.
Sorry dood, dont agree on this one.
I got mine for the fact I want them to last. And I do think they look much nicer.
Posts: 6,367
Threads: 87
Joined: Dec 2011
Reputation:
48
Location: South Yorks.
Car Model/Spec: Rouge vallelunga 5 door Dturbo
Thanks: 2
Given 74 thank(s) in 70 post(s)
I think pressed plates look really smart too, also like i said, I've done my research and they are legal as far as I can see so, no problem really . . .
Phase 1 D-Turdo, K14@24 psi, De-cat, meaty backbox, Bosch pump, grinded LDA pin, duel air fed K&N =133.7bhp & 188ft/lbs
Posts: 4,604
Threads: 90
Joined: Dec 2011
Reputation:
54
Location: Cornwall
Car Model/Spec: 1996 306 DT M-TDI/16
Thanks: 0
Given 20 thank(s) in 18 post(s)
They look win on the right car, hence the question. But not worth it if there illegal. I cant see it attracting much attention, and if there legal, who cares if it does, the rest of the car is 100% legal and declared so the officer is welcome to pull over and humiliate himself.
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |
![[Image: sigi-2.png]](http://i281.photobucket.com/albums/kk226/darrenjlobb/sigi-2.png)
Posts: 15,646
Threads: 541
Joined: Dec 2011
Reputation:
124
Location: Aylesbury
Car Model/Spec: 320bhp Impreza WRX
Thanks: 7
Given 59 thank(s) in 58 post(s)
I dont think id describe them as legal but more not illegal.
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
(25-02-2014, 05:36 PM)Dum-Dum Wrote: I dont think id describe them as legal but more not illegal.
If something isnt illegal, then its legal
legislation allows for metal or plastic plates, 3D or 2D, with the right size and spaceing and font. simple.
|