Partner/Berlingo P Bush

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Partner/Berlingo P Bush
#1
Bought some revised p bushes for a partner berlingo oddly enough for my berlingo van. These were a revised version for later heavier payload vans and a much much better design I opted for a cheap set but seem to be genuine versions.

These are the ones I bought

http://www.ebay.co.uk/itm/PEUGEOT-PARTNE...0439783888

You can get some more expensive version at £30 each!

Easy to fit actually no real problems
The only issue I had is these ones the little m8 bolt that holds it down against the m10 securing bolt. Is actually an m10 on these there are m10x1.25 but I couldn't find any so tapped it out to m10x1.5

Going to see how they fair as an alternative to the standard p bush but also see how they fair being a cheap set to! So far so good but my tracking is out so will see after!

Any way pics!

[Image: null_zps9ccb762a.jpg]

[Image: null_zps34bfeed1.jpg]

[Image: null_zps77e1f4c3.jpg]

[Image: null_zps80672274.jpg]

[Image: null_zps0e0ef12b.jpg]
Perv 106 1.4 xs First Pug Love - Scrapped
Perv 306 1.6 5 Door Hore - Sold
110bhp 207 Hdi Sport - Used as a Brake
173bhp T25 Ph1 Diablo Dturbo - Scrapped
Thirsty Bitch Volvo 850 Estate - Sold
51bhp Berlingo Nad DT Van - Sold
Slow as f*ck Dispatch Work Horse

www.prestige-auto-care.co.uk
Reply
Thanks given by:
#2
So would these fit 306 arms?
They look to be the same arms
[Image: av5ym8.jpg]
Reply
Thanks given by:
#3
yes they would fit.

a great option, especially at that price. never seen them that cheap before, a great find.
as said, need to go up to an m10 buts thats it!

I assume they were press on?
Wishes for more power...
Reply
Thanks given by:
#4
Jimbo, assuming the pins from the wishbones are the same size, yes they will fit Smile
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#5
others I believe have already been doing this for a while but with the expensive versions...so this is a good find.

I wont be fitting crappy putty P bushes to mates 306s ever again!
Wishes for more power...
Reply
Thanks given by:
#6
All front suspension components are the same as a 306. Few people have Been doing this over on the 6 forum but you rarely hear about it as its pretty much fit and forget! Certainly a fair cheaper than the poly bush version. Saying that I know of a certain some one who can get a poly bus to fit....

Piggy bit of moly slip and these can be tapped on with a good tight fit
Perv 106 1.4 xs First Pug Love - Scrapped
Perv 306 1.6 5 Door Hore - Sold
110bhp 207 Hdi Sport - Used as a Brake
173bhp T25 Ph1 Diablo Dturbo - Scrapped
Thirsty Bitch Volvo 850 Estate - Sold
51bhp Berlingo Nad DT Van - Sold
Slow as f*ck Dispatch Work Horse

www.prestige-auto-care.co.uk
Reply
Thanks given by:
#7
Great find mate
Reply
Thanks given by:
#8
Does the hole in subframe accept an m10 bolt or does it need drilling out
[Image: av5ym8.jpg]
Reply
Thanks given by:
#9
Accepts it fine
Perv 106 1.4 xs First Pug Love - Scrapped
Perv 306 1.6 5 Door Hore - Sold
110bhp 207 Hdi Sport - Used as a Brake
173bhp T25 Ph1 Diablo Dturbo - Scrapped
Thirsty Bitch Volvo 850 Estate - Sold
51bhp Berlingo Nad DT Van - Sold
Slow as f*ck Dispatch Work Horse

www.prestige-auto-care.co.uk
Reply
Thanks given by:
#10
I will need to do mine again..only just about lasted 12months!! I will be getting some of these instead!!

Great find mate !!
[Image: siggy1.jpg]

the smokey old bus that sounds like a tractor...
Reply
Thanks given by:
#11
fantastic price good find will get a pair for the next time mine self destruct shouldn't be long lol hopefully a couple months as i replaced both wishbones this time lol
Reply
Thanks given by:
#12
(22-08-2013, 07:29 PM)devils_fuel Wrote: I will need to do mine again..only just about lasted 12months!! I will be getting some of these instead!!

Great find mate !!

This is what I was on about lol
306oc Chat Wrote:15:30: Toms306 - :Genuinely thought it was gonna explode when I was playing with Sam
22:57: SRowell - :wtf why didnt you try harder to make me come!
[Image: connorsig.jpg]
Reply
Thanks given by:
#13
(22-08-2013, 08:22 PM)Connor Wrote:
(22-08-2013, 07:29 PM)devils_fuel Wrote: I will need to do mine again..only just about lasted 12months!! I will be getting some of these instead!!

Great find mate !!

This is what I was on about lol

Ha ha Rodney you plonker.. I've a bad memory lol

Would you be up for another double transplant?
[Image: siggy1.jpg]

the smokey old bus that sounds like a tractor...
Reply
Thanks given by:
#14
(22-08-2013, 06:35 PM)Jenkosowls Wrote: Saying that I know of a certain some one who can get a poly bus to fit....

Everything fits with a big enough hammer! Angel
Custom roll cages/shiny suspension bits/general fabrication work undertaken, PM me.
Top engine mount repair/reinforcement/chocking for cracked chassis and high powered cars, drive in, drive out, 2 hour turnaround.
Reply
Thanks given by:
#15
I have these, got them direct from pug, got the different thread bolts to. Still haven't fitted them though, bought them months ago!
GT2052s DTurbo
OEM+ HDI Estate
Project thread
Reply
Thanks given by:
#16
(22-08-2013, 11:44 PM)Ricky Wrote: I have these, got them direct from pug, got the different thread bolts to. Still haven't fitted them though, bought them months ago!

People have used them for years it's not a big secret. Just allot of peopłe don't appear to know about them dispite being a cheap upgrade for the same cost as ordinary p bushes. As piggy said they used to be quite expensive which would have put people off
Perv 106 1.4 xs First Pug Love - Scrapped
Perv 306 1.6 5 Door Hore - Sold
110bhp 207 Hdi Sport - Used as a Brake
173bhp T25 Ph1 Diablo Dturbo - Scrapped
Thirsty Bitch Volvo 850 Estate - Sold
51bhp Berlingo Nad DT Van - Sold
Slow as f*ck Dispatch Work Horse

www.prestige-auto-care.co.uk
Reply
Thanks given by:
#17
(23-08-2013, 12:25 AM)Jenkosowls Wrote:
(22-08-2013, 11:44 PM)Ricky Wrote: I have these, got them direct from pug, got the different thread bolts to. Still haven't fitted them though, bought them months ago!

People have used them for years it's not a big secret. Just allot of peopłe don't appear to know about them dispite being a cheap upgrade for the same cost as ordinary p bushes. As piggy said they used to be quite expensive which would have put people off

I didn't mean it like its a big secret, just that i haven't got around to fitting them that's all.
GT2052s DTurbo
OEM+ HDI Estate
Project thread
Reply
Thanks given by:
#18
funny this has come up now. im planning on buying 2 sets of these for xsi & hdi next weekend. been planning this after ripping. through a set of what was supposed to be "OE quality" bushes in 3 months . obviously they were not.

will report back when iv done mine Big Grin

[Image: DSC_0190-Copy_zpsf093f84d.jpg]
Member of 99% warning or your nothing club!

Reply
Thanks given by:
#19
I'll be buying some of these come payday. Nice one Jenks. ThumbsUp

Whats the actual bush like in them? Any good?
[Image: car-1.jpg]

Member of the 99% warning or you're nothing club


2000 Moonstone 1.8 Meridian - Sold
2000 China 3dr XS - Dead
1998 Diablo 3dr XSI
Reply
Thanks given by:
#20
Ordered myself a pair. Repped for a great find Smile
Reply
Thanks given by:
#21
(23-08-2013, 05:56 AM)puglove Wrote: funny this has come up now. im planning on buying 2 sets of these for xsi & hdi next weekend. been planning this after ripping. through a set of what was supposed to be "OE quality" bushes in 3 months . obviously they were not.

will report back when iv done mine Big Grin

yet I was talking rubbish when I was saying on another thread about the p bushes dying fast and even OE ones.

now everyones saying theirs wear out fast?!
Wishes for more power...
Reply
Thanks given by:
#22
(23-08-2013, 07:35 AM)Piggy Wrote:
(23-08-2013, 05:56 AM)puglove Wrote: funny this has come up now. im planning on buying 2 sets of these for xsi & hdi next weekend. been planning this after ripping. through a set of what was supposed to be "OE quality" bushes in 3 months . obviously they were not.

will report back when iv done mine Big Grin

yet I was talking rubbish when I was saying on another thread about the p bushes dying fast and even OE ones.

now everyones saying theirs wear out fast?!


Stop talking rubbish


Wink
[Image: car-1.jpg]

Member of the 99% warning or you're nothing club


2000 Moonstone 1.8 Meridian - Sold
2000 China 3dr XS - Dead
1998 Diablo 3dr XSI
Reply
Thanks given by:
#23
(23-08-2013, 06:13 AM)Grant Wrote: I'll be buying some of these come payday. Nice one Jenks. ThumbsUp

Whats the actual bush like in them? Any good?

Looks decent there's allot less rubber than in standard p bush. More symmetrical but only time will tell
Perv 106 1.4 xs First Pug Love - Scrapped
Perv 306 1.6 5 Door Hore - Sold
110bhp 207 Hdi Sport - Used as a Brake
173bhp T25 Ph1 Diablo Dturbo - Scrapped
Thirsty Bitch Volvo 850 Estate - Sold
51bhp Berlingo Nad DT Van - Sold
Slow as f*ck Dispatch Work Horse

www.prestige-auto-care.co.uk
Reply
Thanks given by:
#24
(23-08-2013, 07:35 AM)Piggy Wrote:
(23-08-2013, 05:56 AM)puglove Wrote: funny this has come up now. im planning on buying 2 sets of these for xsi & hdi next weekend. been planning this after ripping. through a set of what was supposed to be "OE quality" bushes in 3 months . obviously they were not.

will report back when iv done mine Big Grin

yet I was talking rubbish when I was saying on another thread about the p bushes dying fast and even OE ones.

now everyones saying theirs wear out fast?!

Piggy mine lasted a few months and my car is not slammed lol
[Image: siggy1.jpg]

the smokey old bus that sounds like a tractor...
Reply
Thanks given by:
#25
(23-08-2013, 07:35 AM)Piggy Wrote:
(23-08-2013, 05:56 AM)puglove Wrote: funny this has come up now. im planning on buying 2 sets of these for xsi & hdi next weekend. been planning this after ripping. through a set of what was supposed to be "OE quality" bushes in 3 months . obviously they were not.

will report back when iv done mine Big Grin

yet I was talking rubbish when I was saying on another thread about the p bushes dying fast and even OE ones.

now everyones saying theirs wear out fast?!

I fitted them the way pellowe calls "correctly for lowered cars" aswell, but i think they were just out right shite quality

[Image: DSC_0190-Copy_zpsf093f84d.jpg]
Member of 99% warning or your nothing club!

Reply
Thanks given by:
#26
Do peugeot sell the genuine bushs on there own or do they come only on the arm any idea and possible part numbers.
Reply
Thanks given by:
#27
just buy these mate. the standard ones are similar price from pug and are rubbish
Wishes for more power...
Reply
Thanks given by:
#28
Bought a pair last night..fingers crossed they last longer than 12months lol
[Image: siggy1.jpg]

the smokey old bus that sounds like a tractor...
Reply
Thanks given by:
#29
Bought a pair of these and 2 pairs have arrived..so a free pair for me being uber cool !!!
[Image: siggy1.jpg]

the smokey old bus that sounds like a tractor...
Reply
Thanks given by:
#30
Is there a guide here for fitting these? I recall there being one but can't find it.

Failing that is this http://www.306gti6.com/forum/showthread.php?id=22963 pretty much all you need?
Might fit mine at the same time as my new front shocks seeing as the droplinks will be of and everything will be a little easier hopefully.
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  P Bush PocketFighter 7 3,032 09-08-2016, 04:47 PM
Last Post: PocketFighter
  p bush upgrade tuttyboy84 9 3,466 14-02-2015, 06:25 PM
Last Post: tuttyboy84
  berlingo/partner hubs on hdi gavxud 4 1,734 11-02-2014, 12:23 PM
Last Post: gavxud

Forum Jump:


Users browsing this thread: 1 Guest(s)