Posts: 1,345
Threads: 119
Joined: Jan 2012
Reputation:
15
Location: Rotherham/Sheffield
Car Model/Spec: Ph1 Diablo DT
Thanks: 0
Given 1 thank(s) in 1 post(s)
22-08-2013, 06:10 PM
(This post was last modified: 22-08-2013, 06:11 PM by Jenkosowls.)
Bought some revised p bushes for a partner berlingo oddly enough for my berlingo van. These were a revised version for later heavier payload vans and a much much better design I opted for a cheap set but seem to be genuine versions.
These are the ones I bought
http://www.ebay.co.uk/itm/PEUGEOT-PARTNE...0439783888
You can get some more expensive version at £30 each!
Easy to fit actually no real problems
The only issue I had is these ones the little m8 bolt that holds it down against the m10 securing bolt. Is actually an m10 on these there are m10x1.25 but I couldn't find any so tapped it out to m10x1.5
Going to see how they fair as an alternative to the standard p bush but also see how they fair being a cheap set to! So far so good but my tracking is out so will see after!
Any way pics!
![[Image: null_zps9ccb762a.jpg]](http://i382.photobucket.com/albums/oo261/pug306lx/null_zps9ccb762a.jpg)
![[Image: null_zps34bfeed1.jpg]](http://i382.photobucket.com/albums/oo261/pug306lx/null_zps34bfeed1.jpg)
![[Image: null_zps77e1f4c3.jpg]](http://i382.photobucket.com/albums/oo261/pug306lx/null_zps77e1f4c3.jpg)
![[Image: null_zps80672274.jpg]](http://i382.photobucket.com/albums/oo261/pug306lx/null_zps80672274.jpg)
![[Image: null_zps0e0ef12b.jpg]](http://i382.photobucket.com/albums/oo261/pug306lx/null_zps0e0ef12b.jpg)
Perv 106 1.4 xs First Pug Love - Scrapped
Perv 306 1.6 5 Door Hore - Sold
110bhp 207 Hdi Sport - Used as a Brake
173bhp T25 Ph1 Diablo Dturbo - Scrapped
Thirsty Bitch Volvo 850 Estate - Sold
51bhp Berlingo Nad DT Van - Sold
Slow as f*ck Dispatch Work Horse
www.prestige-auto-care.co.uk
Posts: 2,103
Threads: 122
Joined: Jan 2013
Reputation:
9
Location: south west, devon
Car Model/Spec: Kingfisher Ph1 Dturbo S
Thanks: 1
Given 7 thank(s) in 7 post(s)
So would these fit 306 arms?
They look to be the same arms
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
yes they would fit.
a great option, especially at that price. never seen them that cheap before, a great find.
as said, need to go up to an m10 buts thats it!
I assume they were press on?
Posts: 19,854
Threads: 581
Joined: Dec 2011
Reputation:
195
Location: Bournemouth
Car Model/Spec: Supercharged 306 GTi6
Thanks: 36
Given 82 thank(s) in 78 post(s)
Jimbo, assuming the pins from the wishbones are the same size, yes they will fit 
Team Eaton
1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
others I believe have already been doing this for a while but with the expensive versions...so this is a good find.
I wont be fitting crappy putty P bushes to mates 306s ever again!
Posts: 1,345
Threads: 119
Joined: Jan 2012
Reputation:
15
Location: Rotherham/Sheffield
Car Model/Spec: Ph1 Diablo DT
Thanks: 0
Given 1 thank(s) in 1 post(s)
22-08-2013, 06:35 PM
(This post was last modified: 22-08-2013, 07:08 PM by Jenkosowls.)
All front suspension components are the same as a 306. Few people have Been doing this over on the 6 forum but you rarely hear about it as its pretty much fit and forget! Certainly a fair cheaper than the poly bush version. Saying that I know of a certain some one who can get a poly bus to fit....
Piggy bit of moly slip and these can be tapped on with a good tight fit
Perv 106 1.4 xs First Pug Love - Scrapped
Perv 306 1.6 5 Door Hore - Sold
110bhp 207 Hdi Sport - Used as a Brake
173bhp T25 Ph1 Diablo Dturbo - Scrapped
Thirsty Bitch Volvo 850 Estate - Sold
51bhp Berlingo Nad DT Van - Sold
Slow as f*ck Dispatch Work Horse
www.prestige-auto-care.co.uk
Posts: 15,646
Threads: 541
Joined: Dec 2011
Reputation:
124
Location: Aylesbury
Car Model/Spec: 320bhp Impreza WRX
Thanks: 7
Given 59 thank(s) in 58 post(s)
Posts: 2,103
Threads: 122
Joined: Jan 2013
Reputation:
9
Location: south west, devon
Car Model/Spec: Kingfisher Ph1 Dturbo S
Thanks: 1
Given 7 thank(s) in 7 post(s)
Does the hole in subframe accept an m10 bolt or does it need drilling out
Posts: 1,345
Threads: 119
Joined: Jan 2012
Reputation:
15
Location: Rotherham/Sheffield
Car Model/Spec: Ph1 Diablo DT
Thanks: 0
Given 1 thank(s) in 1 post(s)
Accepts it fine
Perv 106 1.4 xs First Pug Love - Scrapped
Perv 306 1.6 5 Door Hore - Sold
110bhp 207 Hdi Sport - Used as a Brake
173bhp T25 Ph1 Diablo Dturbo - Scrapped
Thirsty Bitch Volvo 850 Estate - Sold
51bhp Berlingo Nad DT Van - Sold
Slow as f*ck Dispatch Work Horse
www.prestige-auto-care.co.uk
Posts: 3,377
Threads: 96
Joined: Dec 2011
Reputation:
7
Location: Brizzel
Car Model/Spec: 306 tractor
Thanks: 0
Given 0 thank(s) in 0 post(s)
I will need to do mine again..only just about lasted 12months!! I will be getting some of these instead!!
Great find mate !!
![[Image: siggy1.jpg]](http://i653.photobucket.com/albums/uu252/crissy_boy/Cars/siggy1.jpg)
the smokey old bus that sounds like a tractor...
Posts: 55
Threads: 5
Joined: Jul 2013
Location: stoke on trent
Car Model/Spec: 306 HDI Stage1
Thanks: 0
Given 0 thank(s) in 0 post(s)
fantastic price good find will get a pair for the next time mine self destruct shouldn't be long lol hopefully a couple months as i replaced both wishbones this time lol
Posts: 5,852
Threads: 92
Joined: Dec 2011
Reputation:
43
Location: Brizzle
Car Model/Spec: Tracterrrrrrrrr
Thanks: 2
Given 2 thank(s) in 2 post(s)
(22-08-2013, 07:29 PM)devils_fuel Wrote: I will need to do mine again..only just about lasted 12months!! I will be getting some of these instead!!
Great find mate !!
This is what I was on about lol
306oc Chat Wrote:15:30: Toms306 - :Genuinely thought it was gonna explode when I was playing with Sam
22:57: SRowell - :wtf why didnt you try harder to make me come! ![[Image: connorsig.jpg]](http://www.306oc.co.uk/forum/images/uploads/connorsig.jpg)
Posts: 3,377
Threads: 96
Joined: Dec 2011
Reputation:
7
Location: Brizzel
Car Model/Spec: 306 tractor
Thanks: 0
Given 0 thank(s) in 0 post(s)
(22-08-2013, 08:22 PM)Connor Wrote: (22-08-2013, 07:29 PM)devils_fuel Wrote: I will need to do mine again..only just about lasted 12months!! I will be getting some of these instead!!
Great find mate !!
This is what I was on about lol
Ha ha Rodney you plonker.. I've a bad memory lol
Would you be up for another double transplant?
the smokey old bus that sounds like a tractor...
Posts: 1,950
Threads: 55
Joined: Dec 2011
Reputation:
17
Location: Rotherham
Car Model/Spec: 406 V6
Thanks: 3
Given 10 thank(s) in 10 post(s)
(22-08-2013, 06:35 PM)Jenkosowls Wrote: Saying that I know of a certain some one who can get a poly bus to fit....
Everything fits with a big enough hammer! 
Custom roll cages/shiny suspension bits/general fabrication work undertaken, PM me.
Top engine mount repair/reinforcement/chocking for cracked chassis and high powered cars, drive in, drive out, 2 hour turnaround.
Posts: 1,487
Threads: 119
Joined: Apr 2012
Reputation:
5
Location: Buckingham
Car Model/Spec: MG ZS180
Thanks: 0
Given 0 thank(s) in 0 post(s)
I have these, got them direct from pug, got the different thread bolts to. Still haven't fitted them though, bought them months ago!
Posts: 1,345
Threads: 119
Joined: Jan 2012
Reputation:
15
Location: Rotherham/Sheffield
Car Model/Spec: Ph1 Diablo DT
Thanks: 0
Given 1 thank(s) in 1 post(s)
(22-08-2013, 11:44 PM)Ricky Wrote: I have these, got them direct from pug, got the different thread bolts to. Still haven't fitted them though, bought them months ago!
People have used them for years it's not a big secret. Just allot of peopłe don't appear to know about them dispite being a cheap upgrade for the same cost as ordinary p bushes. As piggy said they used to be quite expensive which would have put people off
Perv 106 1.4 xs First Pug Love - Scrapped
Perv 306 1.6 5 Door Hore - Sold
110bhp 207 Hdi Sport - Used as a Brake
173bhp T25 Ph1 Diablo Dturbo - Scrapped
Thirsty Bitch Volvo 850 Estate - Sold
51bhp Berlingo Nad DT Van - Sold
Slow as f*ck Dispatch Work Horse
www.prestige-auto-care.co.uk
Posts: 1,487
Threads: 119
Joined: Apr 2012
Reputation:
5
Location: Buckingham
Car Model/Spec: MG ZS180
Thanks: 0
Given 0 thank(s) in 0 post(s)
(23-08-2013, 12:25 AM)Jenkosowls Wrote: (22-08-2013, 11:44 PM)Ricky Wrote: I have these, got them direct from pug, got the different thread bolts to. Still haven't fitted them though, bought them months ago!
People have used them for years it's not a big secret. Just allot of peopłe don't appear to know about them dispite being a cheap upgrade for the same cost as ordinary p bushes. As piggy said they used to be quite expensive which would have put people off
I didn't mean it like its a big secret, just that i haven't got around to fitting them that's all.
Posts: 8,749
Threads: 208
Joined: Jan 2012
Reputation:
60
Location: Wiltshire
Car Model/Spec: ph2 Gti6 / ph4 HDI Estate
Thanks: 1
Given 5 thank(s) in 5 post(s)
funny this has come up now. im planning on buying 2 sets of these for xsi & hdi next weekend. been planning this after ripping. through a set of what was supposed to be "OE quality" bushes in 3 months . obviously they were not.
will report back when iv done mine 
![[Image: DSC_0190-Copy_zpsf093f84d.jpg]](http://i1038.photobucket.com/albums/a468/167gti8/DSC_0190-Copy_zpsf093f84d.jpg)
Member of 99% warning or your nothing club!
Posts: 5,847
Threads: 169
Joined: Dec 2011
Reputation:
91
Location: South London
Car Model/Spec: 2003 Jaguar S-Type Sport 3.0V6
Thanks: 1
Given 1 thank(s) in 1 post(s)
I'll be buying some of these come payday. Nice one Jenks. 
Whats the actual bush like in them? Any good?
![[Image: car-1.jpg]](http://i1117.photobucket.com/albums/k591/grant-306/car-1.jpg)
Member of the 99% warning or you're nothing club
2000 Moonstone 1.8 Meridian - Sold
2000 China 3dr XS - Dead
1998 Diablo 3dr XSI
Posts: 15,646
Threads: 541
Joined: Dec 2011
Reputation:
124
Location: Aylesbury
Car Model/Spec: 320bhp Impreza WRX
Thanks: 7
Given 59 thank(s) in 58 post(s)
Ordered myself a pair. Repped for a great find
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
(23-08-2013, 05:56 AM)puglove Wrote: funny this has come up now. im planning on buying 2 sets of these for xsi & hdi next weekend. been planning this after ripping. through a set of what was supposed to be "OE quality" bushes in 3 months . obviously they were not.
will report back when iv done mine
yet I was talking rubbish when I was saying on another thread about the p bushes dying fast and even OE ones.
now everyones saying theirs wear out fast?!
Posts: 5,847
Threads: 169
Joined: Dec 2011
Reputation:
91
Location: South London
Car Model/Spec: 2003 Jaguar S-Type Sport 3.0V6
Thanks: 1
Given 1 thank(s) in 1 post(s)
(23-08-2013, 07:35 AM)Piggy Wrote: (23-08-2013, 05:56 AM)puglove Wrote: funny this has come up now. im planning on buying 2 sets of these for xsi & hdi next weekend. been planning this after ripping. through a set of what was supposed to be "OE quality" bushes in 3 months . obviously they were not.
will report back when iv done mine
yet I was talking rubbish when I was saying on another thread about the p bushes dying fast and even OE ones.
now everyones saying theirs wear out fast?!
Stop talking rubbish
Member of the 99% warning or you're nothing club
2000 Moonstone 1.8 Meridian - Sold
2000 China 3dr XS - Dead
1998 Diablo 3dr XSI
Posts: 1,345
Threads: 119
Joined: Jan 2012
Reputation:
15
Location: Rotherham/Sheffield
Car Model/Spec: Ph1 Diablo DT
Thanks: 0
Given 1 thank(s) in 1 post(s)
(23-08-2013, 06:13 AM)Grant Wrote: I'll be buying some of these come payday. Nice one Jenks.
Whats the actual bush like in them? Any good?
Looks decent there's allot less rubber than in standard p bush. More symmetrical but only time will tell
Perv 106 1.4 xs First Pug Love - Scrapped
Perv 306 1.6 5 Door Hore - Sold
110bhp 207 Hdi Sport - Used as a Brake
173bhp T25 Ph1 Diablo Dturbo - Scrapped
Thirsty Bitch Volvo 850 Estate - Sold
51bhp Berlingo Nad DT Van - Sold
Slow as f*ck Dispatch Work Horse
www.prestige-auto-care.co.uk
Posts: 3,377
Threads: 96
Joined: Dec 2011
Reputation:
7
Location: Brizzel
Car Model/Spec: 306 tractor
Thanks: 0
Given 0 thank(s) in 0 post(s)
(23-08-2013, 07:35 AM)Piggy Wrote: (23-08-2013, 05:56 AM)puglove Wrote: funny this has come up now. im planning on buying 2 sets of these for xsi & hdi next weekend. been planning this after ripping. through a set of what was supposed to be "OE quality" bushes in 3 months . obviously they were not.
will report back when iv done mine
yet I was talking rubbish when I was saying on another thread about the p bushes dying fast and even OE ones.
now everyones saying theirs wear out fast?!
Piggy mine lasted a few months and my car is not slammed lol
the smokey old bus that sounds like a tractor...
Posts: 8,749
Threads: 208
Joined: Jan 2012
Reputation:
60
Location: Wiltshire
Car Model/Spec: ph2 Gti6 / ph4 HDI Estate
Thanks: 1
Given 5 thank(s) in 5 post(s)
(23-08-2013, 07:35 AM)Piggy Wrote: (23-08-2013, 05:56 AM)puglove Wrote: funny this has come up now. im planning on buying 2 sets of these for xsi & hdi next weekend. been planning this after ripping. through a set of what was supposed to be "OE quality" bushes in 3 months . obviously they were not.
will report back when iv done mine
yet I was talking rubbish when I was saying on another thread about the p bushes dying fast and even OE ones.
now everyones saying theirs wear out fast?!
I fitted them the way pellowe calls "correctly for lowered cars" aswell, but i think they were just out right shite quality
Member of 99% warning or your nothing club!
Posts: 39
Threads: 6
Joined: Jan 2013
Thanks: 0
Given 0 thank(s) in 0 post(s)
Do peugeot sell the genuine bushs on there own or do they come only on the arm any idea and possible part numbers.
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
just buy these mate. the standard ones are similar price from pug and are rubbish
Posts: 3,377
Threads: 96
Joined: Dec 2011
Reputation:
7
Location: Brizzel
Car Model/Spec: 306 tractor
Thanks: 0
Given 0 thank(s) in 0 post(s)
Bought a pair last night..fingers crossed they last longer than 12months lol
the smokey old bus that sounds like a tractor...
Posts: 3,377
Threads: 96
Joined: Dec 2011
Reputation:
7
Location: Brizzel
Car Model/Spec: 306 tractor
Thanks: 0
Given 0 thank(s) in 0 post(s)
Bought a pair of these and 2 pairs have arrived..so a free pair for me being uber cool !!!
the smokey old bus that sounds like a tractor...
Posts: 908
Threads: 70
Joined: May 2013
Reputation:
10
Location: Bedford
Car Model/Spec: HDi Estate
Thanks: 4
Given 9 thank(s) in 9 post(s)
Is there a guide here for fitting these? I recall there being one but can't find it.
Failing that is this http://www.306gti6.com/forum/showthread.php?id=22963 pretty much all you need?
Might fit mine at the same time as my new front shocks seeing as the droplinks will be of and everything will be a little easier hopefully.
|
![[Image: av5ym8.jpg]](http://i59.tinypic.com/av5ym8.jpg)
![[Image: DSC_0190-Copy_zpsf093f84d.jpg]](http://s1038.photobucket.com/user/167gti8/media/DSC_0190-Copy_zpsf093f84d.jpg.html)
