Posts: 1,766
Threads: 252
Joined: Dec 2011
Reputation:
7
Location: Sheffield/Leeds
Car Model/Spec: Xud sedan/Xud estate
Thanks: 2
Given 2 thank(s) in 2 post(s)
17-08-2013, 08:04 AM
(This post was last modified: 17-08-2013, 10:47 AM by HDIkyle.)
Cruising down the M61 and car started making a tappy noise like something was touching a tyre or skipping on the road, pulled over to hard sholder and car was ticking over about 500rpm. Turned it off had a look nothing obvious no belts gone no leaks. Oil pressure was at around 50psi and temp at 90c, engine temps also at around 80c so nothing out the norm.
Now it won't turn over. AA guy tryd to roll it in 4th and said the engines seized. Oils upto the max mark only changed last week.
So what's peoples thoughts? New engine or is it likely to be fixable like a head problem, snapped valve ect
TD04 11mm Sedan, now 2.1 vnt
Sedan Project
http://306oc.co.uk/forum/thread-5763.html
Provence Dturbo Dead
Blaze 1.6 Dead
China 5dr '6 Death by cambelt failure
Matt White HDI estate Death by wiring
Sedan Dturbo aka triggers broom
Diablo estate Dturbo Living dead
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
oh crap.
doesnt sound good..so engine wont turn over at all?
Posts: 1,766
Threads: 252
Joined: Dec 2011
Reputation:
7
Location: Sheffield/Leeds
Car Model/Spec: Xud sedan/Xud estate
Thanks: 2
Given 2 thank(s) in 2 post(s)
Nope still full of oil tho. Used good stuff aswell this time rather than halfords stuff
TD04 11mm Sedan, now 2.1 vnt
Sedan Project
http://306oc.co.uk/forum/thread-5763.html
Provence Dturbo Dead
Blaze 1.6 Dead
China 5dr '6 Death by cambelt failure
Matt White HDI estate Death by wiring
Sedan Dturbo aka triggers broom
Diablo estate Dturbo Living dead
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
so wont turn over by starter or in gear and push??
sounds like its gone bang...maybe a rod?
Posts: 1,766
Threads: 252
Joined: Dec 2011
Reputation:
7
Location: Sheffield/Leeds
Car Model/Spec: Xud sedan/Xud estate
Thanks: 2
Given 2 thank(s) in 2 post(s)
Nope won't turn with wheels off floor either. Could a rod go but not come out the block. Was motorway speed so nearly 3k rpm
TD04 11mm Sedan, now 2.1 vnt
Sedan Project
http://306oc.co.uk/forum/thread-5763.html
Provence Dturbo Dead
Blaze 1.6 Dead
China 5dr '6 Death by cambelt failure
Matt White HDI estate Death by wiring
Sedan Dturbo aka triggers broom
Diablo estate Dturbo Living dead
Posts: 20,092
Threads: 591
Joined: Nov 2012
Reputation:
54
Location: Cotswolds
Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
yeah. could be a bearing spun. or a rod bent and seized.
big shame
