advice removing steering wheel
|
advice removing steering wheel
|
Has anyone got any tips I should know about changing my ph3 steering wheel.
Im getting a new one sunday and just wondered what I should be looking out for with the air bag. Repp for your help. ![[Image: newsig_zpsee86fa10.jpg]](http://s1215.photobucket.com/user/kingy1975/media/newsig_zpsee86fa10.jpg.html)
09-08-2013, 03:58 PM
Disconnect the battery for half an hour, then 2 torx bits on the back and a 21mm for the bolt (IIRC).
09-08-2013, 04:02 PM
09-08-2013, 04:08 PM
Yeah, I know some have a torx. That's why I said "for the bolt". I've only ever had phase 1s
Posts: 20,092
Threads: 591 Joined: Nov 2012 Reputation: 54 Location: Cotswolds Car Model/Spec: Stage 13 16v HDi 
Thanks: 22
Given 68 thank(s) in 68 post(s)
09-08-2013, 04:36 PM
and when you undo the middle bolt, leave it in a few threads so when you pull/yank/thump the wheel off you dont break your own nose!
Wishes for more power...
09-08-2013, 05:09 PM
Might seem common sense but make sure the wheels keep straight throughout the process, i changed one on a previous car and pulled it slightly one way when taking the wheel off then i put the new one on straight, then wondered why it pulled to the right lol
10-08-2013, 09:30 PM
(09-08-2013, 04:36 PM)Piggy Wrote: and when you undo the middle bolt, leave it in a few threads so when you pull/yank/thump the wheel off you dont break your own nose! yeah do this ^^^^^^ trust me that f*cking hurts!! same with the gear knob 
![[Image: DSC_0190-Copy_zpsf093f84d.jpg]](http://s1038.photobucket.com/user/167gti8/media/DSC_0190-Copy_zpsf093f84d.jpg.html) Member of 99% warning or your nothing club!
Posts: 20,092
Threads: 591 Joined: Nov 2012 Reputation: 54 Location: Cotswolds Car Model/Spec: Stage 13 16v HDi
Thanks: 22
Given 68 thank(s) in 68 post(s)
10-08-2013, 09:32 PM
(09-08-2013, 05:09 PM)Leedunn86 Wrote: Might seem common sense but make sure the wheels keep straight throughout the process, i changed one on a previous car and pulled it slightly one way when taking the wheel off then i put the new one on straight, then wondered why it pulled to the right lol all this will do is mean the wheel doesnt POINT straight, which is just annoying, it wont make the car PULL either way...thats tracking, bottom arms etc Wishes for more power...
10-08-2013, 09:38 PM
Put wheels straight, disconnect battery, make a brew, drink said brew, remove airbag, undo torx nearly all the way, yank wheel, finish removing torx bolt, remove wheel.
Replacement is the reverse of removal. But you swear in different places. Welding and fabrication projects undertaken, contact me for more information.
Posts: 5,902
Threads: 142 Joined: Dec 2011 Reputation: 58 Location: Hastings, East Sussex Car Model/Spec: E46 BMW 320d
Thanks: 17
Given 28 thank(s) in 28 post(s)
What are you doing with the old one Kingy? Is it the 4 spoke one?
/vulture ![[Image: P1060836_zpsz3xgxt7q.jpg]](http://i1101.photobucket.com/albums/g427/wingnutz2/P1060836_zpsz3xgxt7q.jpg) (10-08-2013, 09:38 PM)Jonny81191 Wrote: Put wheels straight, disconnect battery, make a brew, drink said brew, remove airbag, undo torx nearly all the way, yank wheel, finish removing torx bolt, remove wheel. Exactly how i did mine.
11-08-2013, 01:48 PM
(10-08-2013, 09:39 PM)WiNgNuTz Wrote: What are you doing with the old one Kingy? Is it the 4 spoke one? Why r u interested? Ive just feckin rounded off the 2 torx at the bach of the wheel. Great start. Any ideas?
11-08-2013, 04:56 PM
That is a proper facepalm moment. cos if you can't get them out, it'll be a risky job removing the wheel.
If they really properly won't come out, you're gonna have to get the airbag off using brute force to access the torx bolt. Chair all the way back and reclined as far as it'll go, then pry, lever and pull at the airbag until it comes off. DO NOT use anything more than a hacksaw (at most) to cut it, you'll generate too much heat near a pyrotechnic device. Welding and fabrication projects undertaken, contact me for more information.
11-08-2013, 05:03 PM
How do you manage to round the airbag bolts? Even I haven't failed at removing those before!
Are you absolutely sure they're rounded?
Posts: 5,902
Threads: 142 Joined: Dec 2011 Reputation: 58 Location: Hastings, East Sussex Car Model/Spec: E46 BMW 320d
Thanks: 17
Given 28 thank(s) in 28 post(s)
11-08-2013, 05:18 PM
(11-08-2013, 01:48 PM)kingy Wrote:(10-08-2013, 09:39 PM)WiNgNuTz Wrote: What are you doing with the old one Kingy? Is it the 4 spoke one? Might be interested.  Depends if you can actually get it off in one piece though!
11-08-2013, 08:59 PM
Right. Mr stupid here. Didnt round them off I was using the wrong torx. But you carnt see fir shite and basicly just prevail with trail and error.
Anyway, took everyones advice and it went without problem. So ta to everyone for the advice and rep us on its way. Wingynuts, its off and all hoid if you want to make me a offer. Will get a pic if you want. Its not perfect but I have seen alot worse.
Posts: 7,825
Threads: 465 Joined: Dec 2011 Reputation: 114 Location: Cullompton Devon Car Model/Spec: Vauxhall
Thanks: 1
Given 98 thank(s) in 92 post(s)
11-08-2013, 09:06 PM
(11-08-2013, 01:48 PM)kingy Wrote: [ Ive just feckin rounded off the 2 torx at the bach of the wheel. Great start. cool now you need to make the airbag safe remove top cowl ad 12v to the airbag from a distance BANG! now set to with a knife/hammer and chissel do this at your own stupid risk! |
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| Removing locking wheel nuts? | Colactix | 12 | 4,605 |
13-03-2021, 01:30 PM Last Post: Colactix |
|
| steering wheel not straight after beam change/new tyres | Iaitoo | 16 | 3,873 |
13-06-2016, 05:58 AM Last Post: Poodle |
|
| Removing power steering Phase 1 1.4 | Adam CD P1 | 7 | 1,889 |
21-02-2016, 08:39 PM Last Post: Adam CD P1 |
|
