Orougan alloys

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Orougan alloys
#1
I have my orougan wheels up for sale. I painted them gloss black around 18 months ago, and they do now have paint chips where I've been careless with sockets when removing wheels. A couple of them also have slight kerbing, but its only very light. They need a very good clean! I haven't had time to do it but I have cleaned a little bit to make sure the dirt comes off.

The tyres are all goodyear eagle F1's, with very good tread on the back but only a mm or so over the limit on the front.

The front wheels could do with balancing again as the steering wheel starts to vibrate slightly when I reach 70, but the tyres could do with replacing anyway.

Looking for £120 ONO for these.


[Image: IMAG0560_zps0ed23b86.jpg]
[Image: IMAG0558_zps19461bf8.jpg]
[Image: IMAG0557_zpsded9ebd7.jpg]
[Image: IMAG0556_zps672f2d97.jpg]
[Image: IMAG0555_zps71ef3f7a.jpg]
[Image: IMAG0551_zpse4dcc39f.jpg]



Ben
[Image: 20120704_212316.jpg]
Reply
Thanks given by:
#2
Bump!
[Image: 20120704_212316.jpg]
Reply
Thanks given by:
#3
£175? D:
Reply
Thanks given by:
#4
(10-05-2013, 10:13 PM)SRowell Wrote: £175? D:

175 ono yeah, I thought that was pretty reasonable considering the rear tyres are so good, and they are 100 each new.
[Image: 20120704_212316.jpg]
Reply
Thanks given by:
#5
How much for just the 6x9's?
Welding and fabrication projects undertaken, contact me for more information.

Reply
Thanks given by:
#6
£15 for speakers Jonny.
[Image: 20120704_212316.jpg]
Reply
Thanks given by:
#7
Price lowered
[Image: 20120704_212316.jpg]
Reply
Thanks given by:
#8
How much for the shelf on its own posted ? Smile
Reply
Thanks given by:
#9
Bring the speakers to ppc if you can, might have them off you. You'll have to come and remind me though!
Welding and fabrication projects undertaken, contact me for more information.

Reply
Thanks given by:
#10
Bump. Wheels still here. Offers??
[Image: 20120704_212316.jpg]
Reply
Thanks given by:
#11
Bump!
[Image: 20120704_212316.jpg]
Reply
Thanks given by:
#12
Bump! Price lowered..
[Image: 20120704_212316.jpg]
Reply
Thanks given by:
#13
would of had these if you weren't the other side of the country Sad
Blaze '6 and Blaze D-turbo!
Reply
Thanks given by:
#14
Where are you located mate?
Reply
Thanks given by:
#15
Yeah I am a bit out of most peoples way. I'm in Norwich.
[Image: 20120704_212316.jpg]
Reply
Thanks given by:
#16
Just out of interest did you need spacers to fit these to your 306? or were they just bolt on?



Reply
Thanks given by:
#17
You don't need spacers on the front, and you don't on the back either if your beam is VERY good. I needed 5mm spacers on the back due to slight beam camber, but I ran 20mm instead because it sat the wheel nicely in the arch.
[Image: 20120704_212316.jpg]
Reply
Thanks given by:
#18
Bump!
[Image: 20120704_212316.jpg]
Reply
Thanks given by:
#19
Can you post these? Cheers
Reply
Thanks given by:
#20
are they ET20 or 28?
Reply
Thanks given by:
#21
(28-12-2013, 03:50 PM)Newlands Wrote: Can you post these? Cheers

I don't mind packaging them if you would like to arrange a courier to pick them up.

(28-12-2013, 04:12 PM)welshpug Wrote: are they ET20 or 28?

Not sure how I would tell? Are there two types of orougan's then?
[Image: 20120704_212316.jpg]
Reply
Thanks given by:
#22
There's 4,

14", 15",

16" ET20 and 16" ET28.

you tell by looking at the numbers on the back,
Reply
Thanks given by:
#23
Oh ok, I thought all that was on the back was 'Orougan'. I won't get a chance to look until the 2nd or 3rd, but I will get back to you.
[Image: 20120704_212316.jpg]
Reply
Thanks given by:
#24
It says 28 on the back so I assume that's the et.

Unforntunatly I have noticed a flat spot on one of the wheels. Its about 30mm long and on the inside of the wheel. Still holds its air fine though.
[Image: 20120704_212316.jpg]
Reply
Thanks given by:
#25
I thought orougans were et20 and nimrods were et28??

[Image: DSC_0190-Copy_zpsf093f84d.jpg]
Member of 99% warning or your nothing club!

Reply
Thanks given by:
#26
(03-01-2014, 07:23 PM)puglove Wrote: I thought orougans were et20 and nimrods were et28??

I don't know, never looked into it. All four of these have Orougan written on the back, and underneath where it says 6.5j it says '4 - 28'. It doesn't say 'et' or '20' anywhere so I assume that '28' is the et.
[Image: 20120704_212316.jpg]
Reply
Thanks given by:
#27
How much for the wheels if I can pick them up the weekend maybe ???
Reply
Thanks given by:
#28
(03-01-2014, 11:44 PM)Donkeybubles Wrote: How much for the wheels if I can pick them up the weekend maybe ???

Price is 120, but you can make me an offer. I'm working nights this weekend so unfortunately collection would have to be between about 3pm and 9pm tomorrow. Failing that sometime during the week would be do-able.

Ps. Probably won't be on here again today, so ill pm you my number incase you want to text.
[Image: 20120704_212316.jpg]
Reply
Thanks given by:
#29
Still for sale. Would also be interested in a swap for some 15 inch wheels
[Image: 20120704_212316.jpg]
Reply
Thanks given by:
#30
Really want a set of these I have some cyclones but need a refurb. Was going to do it but id rather another set of wheels to be honest.
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  FOR SALE: Starfish alloys 16", 21mm TB VTS beam, C5 alloys Ricky 11 3,368 07-05-2014, 08:12 AM
Last Post: Ricky
  Orougan wheels - offers welcome Ben 9 2,630 27-08-2013, 07:14 PM
Last Post: Ben

Forum Jump:


Users browsing this thread: 11 Guest(s)