+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: For Sale (https://www.306oc.co.uk/forum/forumdisplay.php?fid=26)
+--- Forum: Parts (https://www.306oc.co.uk/forum/forumdisplay.php?fid=25)
+--- Thread: Orougan alloys (/showthread.php?tid=13138)
Pages:
1
2
Orougan alloys - Ben - 23-04-2013
I have my orougan wheels up for sale. I painted them gloss black around 18 months ago, and they do now have paint chips where I've been careless with sockets when removing wheels. A couple of them also have slight kerbing, but its only very light. They need a very good clean! I haven't had time to do it but I have cleaned a little bit to make sure the dirt comes off.
The tyres are all goodyear eagle F1's, with very good tread on the back but only a mm or so over the limit on the front.
The front wheels could do with balancing again as the steering wheel starts to vibrate slightly when I reach 70, but the tyres could do with replacing anyway.
Looking for £120 ONO for these.
![[Image: IMAG0560_zps0ed23b86.jpg]](http://s1183.photobucket.com/user/247ben10/media/IMAG0560_zps0ed23b86.jpg.html)
![[Image: IMAG0558_zps19461bf8.jpg]](http://s1183.photobucket.com/user/247ben10/media/IMAG0558_zps19461bf8.jpg.html)
![[Image: IMAG0557_zpsded9ebd7.jpg]](http://s1183.photobucket.com/user/247ben10/media/IMAG0557_zpsded9ebd7.jpg.html)
![[Image: IMAG0556_zps672f2d97.jpg]](http://s1183.photobucket.com/user/247ben10/media/IMAG0556_zps672f2d97.jpg.html)
![[Image: IMAG0555_zps71ef3f7a.jpg]](http://s1183.photobucket.com/user/247ben10/media/IMAG0555_zps71ef3f7a.jpg.html)
![[Image: IMAG0551_zpse4dcc39f.jpg]](http://s1183.photobucket.com/user/247ben10/media/IMAG0551_zpse4dcc39f.jpg.html)
Ben
RE: Orougans and MDF shelf with 6x9's (can bring to PPC) - Ben - 10-05-2013
Bump!
RE: Orougan alloys and MDF shelf with 6x9's (can bring to PPC) - Eeyore - 10-05-2013
£175? D:
RE: Orougan alloys and MDF shelf with 6x9's (can bring to PPC) - Ben - 11-05-2013
(10-05-2013, 10:13 PM)SRowell Wrote: £175? D:
175 ono yeah, I thought that was pretty reasonable considering the rear tyres are so good, and they are 100 each new.
RE: Orougan alloys and MDF shelf with 6x9's (can bring to PPC) - Jonny81191 - 11-05-2013
How much for just the 6x9's?
RE: Orougan alloys and MDF shelf with 6x9's (can bring to PPC) - Ben - 11-05-2013
£15 for speakers Jonny.
RE: Orougan alloys and MDF shelf with 6x9's (can bring to PPC) - Ben - 13-05-2013
Price lowered
RE: Orougan alloys and MDF shelf with 6x9's (can bring to PPC) - joelww - 15-05-2013
How much for the shelf on its own posted ?
RE: Orougan alloys and MDF shelf with 6x9's (can bring to PPC) - Jonny81191 - 15-05-2013
Bring the speakers to ppc if you can, might have them off you. You'll have to come and remind me though!
RE: Orougan alloys and MDF shelf with 6x9's (can bring to PPC) - Ben - 07-06-2013
Bump. Wheels still here. Offers??
RE: Orougan alloys - Ben - 26-06-2013
Bump!
RE: Orougan alloys - Ben - 05-11-2013
Bump! Price lowered..
RE: Orougan alloys - Mitch - 06-11-2013
would of had these if you weren't the other side of the country
Orougan alloys - sherman306 - 06-11-2013
Where are you located mate?
RE: Orougan alloys - Ben - 07-11-2013
Yeah I am a bit out of most peoples way. I'm in Norwich.
RE: Orougan alloys - Chris_90 - 08-11-2013
Just out of interest did you need spacers to fit these to your 306? or were they just bolt on?
RE: Orougan alloys - Ben - 08-11-2013
You don't need spacers on the front, and you don't on the back either if your beam is VERY good. I needed 5mm spacers on the back due to slight beam camber, but I ran 20mm instead because it sat the wheel nicely in the arch.
RE: Orougan alloys - Ben - 27-12-2013
Bump!
RE: Orougan alloys - Newlands - 28-12-2013
Can you post these? Cheers
RE: Orougan alloys - welshpug - 28-12-2013
are they ET20 or 28?
RE: Orougan alloys - Ben - 29-12-2013
(28-12-2013, 03:50 PM)Newlands Wrote: Can you post these? Cheers
I don't mind packaging them if you would like to arrange a courier to pick them up.
(28-12-2013, 04:12 PM)welshpug Wrote: are they ET20 or 28?
Not sure how I would tell? Are there two types of orougan's then?
RE: Orougan alloys - welshpug - 29-12-2013
There's 4,
14", 15",
16" ET20 and 16" ET28.
you tell by looking at the numbers on the back,
RE: Orougan alloys - Ben - 30-12-2013
Oh ok, I thought all that was on the back was 'Orougan'. I won't get a chance to look until the 2nd or 3rd, but I will get back to you.
RE: Orougan alloys - Ben - 03-01-2014
It says 28 on the back so I assume that's the et.
Unforntunatly I have noticed a flat spot on one of the wheels. Its about 30mm long and on the inside of the wheel. Still holds its air fine though.
RE: Orougan alloys - puglove - 03-01-2014
I thought orougans were et20 and nimrods were et28??
RE: Orougan alloys - Ben - 03-01-2014
(03-01-2014, 07:23 PM)puglove Wrote: I thought orougans were et20 and nimrods were et28??
I don't know, never looked into it. All four of these have Orougan written on the back, and underneath where it says 6.5j it says '4 - 28'. It doesn't say 'et' or '20' anywhere so I assume that '28' is the et.
RE: Orougan alloys - Donkeybubles - 03-01-2014
How much for the wheels if I can pick them up the weekend maybe ???
RE: Orougan alloys - Ben - 04-01-2014
(03-01-2014, 11:44 PM)Donkeybubles Wrote: How much for the wheels if I can pick them up the weekend maybe ???
Price is 120, but you can make me an offer. I'm working nights this weekend so unfortunately collection would have to be between about 3pm and 9pm tomorrow. Failing that sometime during the week would be do-able.
Ps. Probably won't be on here again today, so ill pm you my number incase you want to text.
RE: Orougan alloys - Ben - 20-01-2014
Still for sale. Would also be interested in a swap for some 15 inch wheels
RE: Orougan alloys - mattyh24hdi - 20-01-2014
Really want a set of these I have some cyclones but need a refurb. Was going to do it but id rather another set of wheels to be honest.