Droplink Removal

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Droplink Removal
#1
So I'm sure we've all been there, with droplinks rounding when you try to remove them. I had that today, and though I'd go at it from the other side (giggidy) by popping off it the ball joint, then getting some grips on it. The bastard thing wouldn't come off the ball joint, so I though sawing it in half to get some more leverage would work, though being metal droplinks this took some time, and then instead of popping off they just bent. I decided fire was the best solution, and melted the surrounding rubber/plastic from the balljoint, so they came off nicely, though now I'm left with the problem that even with a socket and mole grips on the ball joint, I'm unable to remove the bolts.

Anyone got any ideas or tips? I don't have an angle grinder, otherwise that would have been my first solution. I'm guessing I'm just going to have to suck it up and get it taken to a garage and get them to buzz it off?
Reply
Thanks given by:
#2
don't all drop links have two flat edges on the rear side so you can grab it with a spanner? i know 99% of car's we have had in the garage do
Reply
Thanks given by:
#3
Buzz gun / grinder....should be able to grip it with vice grips though, mtfu and tighten the shit out of them, let them hit the car and clean the showing threads and un do, shouldnt be THAT tight....or weld someting to the ball if u know someone with welder..
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |

[Image: sigi-2.png]
Reply
Thanks given by:
#4
What Darren said... If you don't have a grinder, go grab one. Saves the hassle and then you've got it for any future jobs, and you're kinda failing as a 306 owner without one Wink
Reply
Thanks given by:
#5
i dont even bother trying to undo these now they are cheap so a disposable item
I reach straight for the disc cutter
Reply
Thanks given by:
#6
(10-03-2013, 06:26 PM)Puggie Wrote: don't all drop links have two flat edges on the rear side so you can grab it with a spanner? i know 99% of car's we have had in the garage do
They don't have flat edges unfortunately, these are a spanner and allen key job, which means they inevitably round because they're made of cheese.

(10-03-2013, 06:27 PM)darrenjlobb Wrote: Buzz gun / grinder....should be able to grip it with vice grips though, mtfu and tighten the shit out of them, let them hit the car and clean the showing threads and un do, shouldnt be THAT tight....or weld someting to the ball if u know someone with welder..

(10-03-2013, 06:30 PM)Curt Wrote: What Darren said... If you don't have a grinder, go grab one. Saves the hassle and then you've got it for any future jobs, and you're kinda failing as a 306 owner without one Wink
I did consider just buying one for future use, but I'm clearing out the garage as we're having it converted, so I'm not going to have the room any more for power tools. Not to mention my driveway is on a slope so I wouldn't be able to jack up the car there to get at it and use power from the house. I would have just removed the strut and fitted the GTi suspension for lows and to make things easier, but the one on the ARB is the same. Sad
Reply
Thanks given by:
#7
Put a vertical slit in the end of the nut to cut it in half - i did that once with a hacksaw when i wasn't at my house to use the grinder.

Grips should work on the back though, they shouldn't be that tight. Use stilsons if you have them.
Night Blue VW Golf 7 GTD : Bianca 306 Rallye : Mini Cooper D (The Mrs')
[Image: wallye-gtd.JPG?raw=1]
HDi Owner for 200k/9 years
Reply
Thanks given by:
#8
Just MTFU
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Reply
Thanks given by:
#9
I'm surprised it took 8 posts for someone to say that lol
Reply
Thanks given by:
#10
Haha I'm slacking today
[Image: 20A1806D-891D-40FB-BD52-AD519177A607-734...391753.jpg]
TEAM CONROD SHITTING RALLYE!
Reply
Thanks given by:
#11
I said it in the 3rd post!!
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |

[Image: sigi-2.png]
Reply
Thanks given by:
#12
Reading fail, thanks Wink
Reply
Thanks given by:
#13
i had to google MTFU Huh
Reply
Thanks given by:
#14
All the ones I've seen have 2 flats hidden on the ball side too. A file will put s goof flats on it if it dosen't have them but like Cully says these are a disposable item these days. Fire, violence and a big cutting disc are definitely the way forwards.
Reply
Thanks given by:
#15
I don't suppose you have one and are free tomorrow night Chris?

There definitely aren't and flats on either ball joint.
Reply
Thanks given by:
#16
Jack under the ARB where it meets the link. Should put enough pressure on it to allow you to unbolt it.
Team Eaton


1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
Reply
Thanks given by:
#17
It's not connected to anything man, there's no tension on it at all! Sad
Reply
Thanks given by:
#18
(10-03-2013, 10:43 PM)Scott Wrote: It's not connected to anything man, there's no tension on it at all! Sad

Jam a bar over the other end to put some tension on it?
Welding and fabrication projects undertaken, contact me for more information.

Reply
Thanks given by:
#19
Scott, i'd offer advice, but Matt and co all know what happened last time i 'helped' to remove a droplink.
Team - Inappropriate Footwear. Member 1 of 3.

1. Fooby's Car
2. Fooby's Hire Car(s)
3. Fooby's Company Pool Car

Team Self Improvement
1. Learn to Car
Reply
Thanks given by:
#20
Mole grips and fury worked on mine
[Image: sigcopy-1.jpg]
Diablo Meridian HDi - 125bhp - 73.0MPG - Halfords Wheels
Reply
Thanks given by:
#21
Scott, where about in London are you?
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
  Wishbone rubbing on droplink? Matt 24 5,996 16-06-2015, 06:33 AM
Last Post: ginge191

Forum Jump:


Users browsing this thread: 3 Guest(s)