24-02-2013, 11:43 AM
That's a nice easy fix! Glad to hear it
Giving up
|
24-02-2013, 11:43 AM
That's a nice easy fix! Glad to hear it
(24-02-2013, 01:21 AM)David Wrote: Right iv finally given up on these French heaps of shite! All human error on your behalf sorry but don't blame the car. (24-02-2013, 12:31 PM)Face. Wrote:(24-02-2013, 01:21 AM)David Wrote: Right iv finally given up on these French heaps of shite! Also if it's leaking a small but round the rocker cover gasket use it till the new one arrives and there cheap as chips(been there done that on 2 pugs)
24-02-2013, 12:50 PM
Right AA have came and looked at it and well the HG has blown! It builds pressure up very fast and blows the heater matrix pipe right off!
I've also got loads of smoke coming out of the oil breather pipe. Team derv FLAME and CONROD spitters
24-02-2013, 12:53 PM
Did you do a HG on it before fitting it? If not, sounds to me like you have blown it by running it hot!
Team Eaton
1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
24-02-2013, 12:59 PM
There is a high chance it started to go before it went into my car
Team derv FLAME and CONROD spitters
24-02-2013, 01:01 PM
Don't forget Sam owned the car then engine came out of, and Dave said it had no coolant in it when he went to strip it down.
So I'm thinking it was on its way out anyway.
24-02-2013, 01:03 PM
surprised it wasnt done when engine was out tbh
24-02-2013, 01:04 PM
(24-02-2013, 01:03 PM)Just Sean Wrote: surprised it wasnt done when engine was out tbh It didn't cross our mind at all. Team derv FLAME and CONROD spitters
24-02-2013, 01:09 PM
if i was going through the effort of putting a new engine in id have everything possible changed/renewed
24-02-2013, 01:11 PM
It's hard when you have no money to and you need the car back on the road for the weekend!
Team derv FLAME and CONROD spitters
24-02-2013, 02:47 PM
It might not be the HG
Sounds like your matrix pipes are shit as they shouldnt blow out under pressure. The weak point of the system is supposed to be the rad cap so that water comes out the overflow (Ive had enough DTs with head gaskets going to know this) If you can see the oil leak if from the RC then fix that. The oil breathers are normally pretty smokey on these cars (its actually often steam/condensation) 120*C isnt an abnormal temperature for oil especially on a tuned turbo charged car. Did you have the coolant sniff tested to see if theres exhaust gas in it? Have you had a compression test done? Is there any other signs of the head gasket going other than blowing the matrix hoses?
24-02-2013, 02:54 PM
There is bubbles coming through the coolant bottle. He got some weird machine outnthat tested the pressure and it rose quite fast. It got whiteish smoke coming out of my oil breather pipe and there was abit of smoke coming out of the coolant bottle.
Team derv FLAME and CONROD spitters
24-02-2013, 02:56 PM
bubbles is not good...but duz depend if its been fully blead
if the pressure rising fast though...thats usually a sure sign Wishes for more power...
24-02-2013, 03:05 PM
(24-02-2013, 02:56 PM)Piggy1987 Wrote: bubbles is not good...but duz depend if its been fully blead He guy fully bled its aswell. So that's two engine within a week! Team derv FLAME and CONROD spitters
24-02-2013, 03:14 PM
not at all. Just because the HG is gone doesnt mean you need a new engine. You can have a new gasket on it in a day!
Team Eaton
1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
24-02-2013, 03:17 PM
Before I get back into modifying old French cars again I'm going to sort out a secondary mode of transport, so if something like this happens there won't be the same pressure to fix it. I know what it's like when something breaks and you need it to get to work, just makes you hate the thing!
But I think if I have another mode of transport ie motorbike then I wouldn't get so annoyed and I can spend time figuring out how to fix it myself instead of getting my dad to do it quickly and I learn nothing, Hope you get it sorted though man because I love your car!
24-02-2013, 03:41 PM
(24-02-2013, 03:14 PM)Niall Wrote: not at all. Just because the HG is gone doesnt mean you need a new engine. You can have a new gasket on it in a day! I hang got the time or the money ATM to get the head skimmed and all that Team derv FLAME and CONROD spitters
24-02-2013, 03:53 PM
In all fairness, if you guys were under the impression that the gasket was going before the engine went it, why are you surprised it happened?
Team Eaton
1999 China Blue 306 GTi6 - Eaton Supercharged - 214.5bhp 181lbft
24-02-2013, 03:55 PM
(24-02-2013, 03:53 PM)Niall Wrote: In all fairness, if you guys were under the impression that the gasket was going before the engine went it, why are you surprised it happened? Sam had someone look at it and they said it was the timing or the injectors so we sorted that out before it went in my car but now I've seen the proof that its the HG it got us thinking back about it Team derv FLAME and CONROD spitters
24-02-2013, 06:08 PM
(24-02-2013, 01:01 PM)Chris Wrote: Don't forget Sam owned the car then engine came out of, and Dave said it had no coolant in it when he went to strip it down. I had problems with the heating when I bout it off you! So dont start blaming me! Atleast dave didnt buy it off me
24-02-2013, 06:21 PM
(24-02-2013, 06:08 PM)sam Wrote:(24-02-2013, 01:01 PM)Chris Wrote: Don't forget Sam owned the car then engine came out of, and Dave said it had no coolant in it when he went to strip it down. Calm down big fella or I'm gunna come bum you Team derv FLAME and CONROD spitters
Sounds fun is there a kebab involved? and I hate when people say because I owned it!! I dont drive like a asshole always let it warm up before I do anything I hate been blamed for it! I had the car at work for about 3 days on amd off the ramp replaced alot of stuff because of the heating issues as soon as I replaced the thermostat it sorted it and it didnt pressurise in the coolant pipe, then I get told that one of the injectors is faulty hence the engine stuttering and the timing was out by the emount of smoke and colour of the smoke, next thing on the list todo was get a new cambelt and headgasket done as I didnt have anything to prove that it uad been done!
24-02-2013, 06:29 PM
(24-02-2013, 06:27 PM)sam Wrote: Sounds fun is there a kebab involved? and I hate when people say because I owned it!! I dont drive like a asshole always let it warm up before I do anything I hate been blamed for it! I had the car at work for about 3 days on amd off the ramp replaced alot of stuff because of the heating issues as soon as I replaced the thermostat it sorted it and it didnt pressurise in the coolant pipes I blame you for all of it Bum fun in a kabab shop sounds fun to me. Dw mate i blame the old owner for the car shitting a conrod (24-02-2013, 06:29 PM)Dan! Wrote:(24-02-2013, 06:21 PM)David Wrote: Calm down big fella or I'm gunna come bum you That's because you take it too often Team derv FLAME and CONROD spitters |
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Giving in and scrapping the Pug | Pughawk | 7 | 3,952 |
29-11-2018, 06:16 PM Last Post: Martin306 |
|
Giving up smoking again. | bashbarnard | 22 | 4,254 |
15-05-2015, 02:06 PM Last Post: Poodle |
|
Feel like giving up :( | Piggy | 33 | 9,305 |
19-07-2013, 08:47 AM Last Post: Danny2009 |