The E30 Track car

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
The E30 Track car
#61
Its got a stainless powerflow exhaust which sounds pretty good imo, has a lovely old skool engine purr too Smile

You gonna have your camera? Il have mine but it will be in the car recording the track driving so wont get any photos Sad
Reply
Thanks given by:
#62
Carlos182 Wrote:Interesting to see how that diff turns out too... haha!

[Image: 131_0905_03_z+may_2009_4x4_whoops+broken...ential.jpg]

Like this Tongue
Quote:(15:06:27) Toms306: Wd40d it and had a good tug, came straight off

[Image: attachment.php?aid=5522]


Reply
Thanks given by:
#63
Looks like a lot of fun Smile

Can you not get a LSD from an M3 or does nothing line up correctly? I thought that by having an open diff on track then the car might be harder to catch if you should find yourself in a bit of a slide?
Disclaimer: The above is not to be taken to heart and is probably a joke, grow up you big girl.
[Image: Sig500x130.png]
Reply
Thanks given by:
#64
Yeah an LSD should fit no problem, but a normal old / non-refurbed LSD from the E30 sport models is £300+, which is too much at the moment. Its something we'l be buying in a few months though. And the welded diff made it a bit of a nightmare to control round fast corners. You basically either had to go round slowly or sideways lol
Reply
Thanks given by:
#65
Yea always used to wind me up when people just welded the LSDs on the MX5 forums. WHYY!!? makes it very twitchy and unpredictable on the public highway, which can't be good for your trousers...
Disclaimer: The above is not to be taken to heart and is probably a joke, grow up you big girl.
[Image: Sig500x130.png]
Reply
Thanks given by:
#66
Dan! Wrote:You basically had to go round sideways lol

Win. :auto-iroc:
Supercharged GTi6 Build
S14 Zenki Build
[Image: signature.png]
Reply
Thanks given by:
#67
Really can't wait to see this at PPC, just remember to put some fuel in it this time. Wink
306 HDi Deathtrap - 130bhp / 220lbft
...UPGRADING...



Reply
Thanks given by:
#68
silverzx Wrote:
Dan! Wrote:You basically had to go round sideways lol

Win. :auto-iroc:
:auto-layrubber: more win
[Image: IMG_20130925_181339_zps95df48fa.jpg]
Reply
Thanks given by:
#69
you had some fun with this yet?
Reply
Thanks given by:
#70
procta Wrote:you had some fun with this yet?

Check the PPC pics thread!
On the 306 waiting list.
Reply
Thanks given by:
#71
How was it round the track Dan!? i've seen the pics but it doesnt say much about the car itself lol
Diablo Hdi Dturbo and 205 1.9 project - it lives!
Reply
Thanks given by:
#72
Has this gone anywhere since this thread?

Love old skool E30's, may well make one my next project. If the mrs wants to move to South Africa then it's going to be an old skool BMW project with overnight parts from Europe. Nothing rusts here!
Night Blue VW Golf 7 GTD : Bianca 306 Rallye : Mini Cooper D (The Mrs')
[Image: wallye-gtd.JPG?raw=1]
HDi Owner for 200k/9 years
Reply
Thanks given by:
#73
Loving the e30 dan if ever you decide to sell the rims be sure to give me a shout as they would look awesome on my 325i sport
Reply
Thanks given by:
#74
(16-12-2012, 01:17 PM)C2K Wrote: Has this gone anywhere since this thread?

Love old skool E30's, may well make one my next project. If the mrs wants to move to South Africa then it's going to be an old skool BMW project with overnight parts from Europe. Nothing rusts here!

never heard anything more either,
Reply
Thanks given by:
#75
It's currently covered in mould hahah

There is stuff happening, just not stuff worth updating at the moment..

But by the looks of it there will be some update to this in the near future ninja
On the 306 waiting list.
Reply
Thanks given by:
#76
Nice work. Did I see somewhere its an M20B25?

M52B28's are a nice improvement Smile Mine has been R/r at 225bhp Smile

Keep up the good work Smile

Andy
Reply
Thanks given by:
#77
Yeah its a 2.5, we have considered an engine change but decided its not worth it, it really is a budget motor and the 2.5 does drive well so it will do :-)

Quite a bit to update on this soon, polycarb windows, coilovers, lots of weight removed and general clean up of the engine bay/dash etc. Will get some photos and do a proper write up soon :-)
Reply
Thanks given by:
#78
Awesome keep it coming Smile Are you on the zone?
Reply
Thanks given by:
#79
Yeah im on there Andy, but dont use it much unless I have an E30 specific problem. The Wiki on there is really helpful!

Anyway, time for an update!

Its been in the garage a lot over winter for a bit of a makeover. Stripped around 60kg more weight out of it (Front bumper insert, windows/motors, dash, wiring, sound deadening, rear spoiler and bonnet hinge/strut/release) And also got some extended rear arches and some coilovers.

The rear arches took a bit of cutting, trimming and test fitting but they are on now and serve their purpose well, no more scrubbing tyres.

The coilovers are only FK cheapies but in comparison to the worn out standard shocks and ancient 40mm springs they are much stiffer and have dropped the car nicely, body roll was a big issue before but that should be sorted out now. Going to pull the height adjuster plates out of the rear soon to drop it another 10mm.

Also got some polycarbonate sheet and made up front and rear side windows, easy enough and saved around 15kg overall.


Few photos I got when it was outside the other day. Bonnet currently off while we fit bonnet pins but other than that its in its 'finished' state ready for summer.

[Image: 8524719353_4a16aaa1b7_c.jpg]
The BMW by Daan!, on Flickr

[Image: 8525833418_a78dd365b0_c.jpg]
The BMW by Daan!, on Flickr

[Image: 8524721173_7fb9c6fe01_c.jpg]
The BMW by Daan!, on Flickr

[Image: 8524721969_3264cc4a0e_c.jpg]
The BMW by Daan!, on Flickr

[Image: 8524723029_d4d603e9c7_c.jpg]
The BMW by Daan!, on Flickr

[Image: 8524724155_a6a59677f0_c.jpg]
The BMW by Daan!, on Flickr

[Image: 8524725987_416d318eee_c.jpg]
The BMW by Daan!, on Flickr

Also, front wheels are hideous, I know! But they were cheap and came with some fairly decent Yoko Paradas on, so they are staying until the tyres are polished off Smile
Reply
Thanks given by:
#80
Shes looking good mate.
Reply
Thanks given by:
#81
Looks so good!
Reply
Thanks given by:
#82
What f*cking cowboy done this ?? lmao


Attached Files Image(s)
   

[Image: DSC_0190-Copy_zpsf093f84d.jpg]
Member of 99% warning or your nothing club!

Reply
Thanks given by:
#83
Ha ha never noticed the wheel bolt lfmao!
[Image: SDC10442-1.jpg]
Reply
Thanks given by:
#84
Lol that diff wont last 5 minutes, ive welded a few field car ones over the years and found you have gotta weld them seriosuly solid to stop them breaking free, and thats not on tarmac! Tongue
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |

[Image: sigi-2.png]
Reply
Thanks given by:
#85
That weld doesn't look like it hold a cold, let alone a drift lol

I welded the diff on my 328 because it was the easiest option at the time, I did a much better job than that haha
[Image: 704e7db1.jpg]
Reply
Thanks given by:
#86
That was how it was hen he bought it....


It has been sorted since.
On the 306 waiting list.
Reply
Thanks given by:
#87
Ah thank fook!
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |

[Image: sigi-2.png]
Reply
Thanks given by:
#88
Here you go Darren, you'll love this! Wink

[Image: 7157046316_0a4ba967cf_z.jpg]

[Image: 7157154366_9fc28ab509_z.jpg]

[Image: 7157155652_0f884b44a9_z.jpg]

[Image: 7157042962_9f92398c7a_z.jpg]

[Image: 7157156944_b072991316_z.jpg]

[Image: 7157030306_2dc61660f8_z.jpg]

[Image: 7157023834_0024b5ddfa_z.jpg]

[Image: 7157018268_eebfaf1b2e_z.jpg]

[Image: 7157158470_417370a793_z.jpg]

[Image: 7157159480_195306d789_z.jpg]

It's done over 1000 miles since like that, doesnt whine or grind, seems fine Big Grin
Reply
Thanks given by:
#89
haha you hero Tongue just what I would have done, tbh im amazed that those welds hadnt cracked / shaken the lot to pieces being driven like it was!
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |

[Image: sigi-2.png]
Reply
Thanks given by:
#90
Love that bodge weld there. My mates welded up a diff on a E46 318 estate wagon with an arc and it was welded so strong that the stress of having a welder' actually ripped the subframe from the chassis from drift abuse lmao

Epic car though Dan, shame I didn't know you had a welder on it as a mate had sold his E30 LSD not long ago.
Stage 2 XUD Sedan
Reply
Thanks given by:


Forum Jump:


Users browsing this thread: 1 Guest(s)