16-07-2012, 04:18 PM
Ok thank you mate, i was just checking
GI: BakerBM Parts
|
16-07-2012, 04:18 PM
Ok thank you mate, i was just checking
17-07-2012, 07:55 PM
Is that bongo/Matt or Matt/Matt?
I'm not fussed either way, just want to know when to man the postbox!?
17-07-2012, 09:16 PM
Scott, as per our discussion at ace, shall I ring Stuart direct myself at the same time as organising the rear arms or do you need to sort it out yourself through him?
22-07-2012, 06:34 PM
Everything has been posted out now Jamie, Matt, you should receive yours on Monday, as should Mark and Jonny7966546326&^%&*(57890876543245768#8p0987965q.
Southerners who ordered beam mounts, I'll bring them next week to Matt's next weekend for anyone that's going to be there?
22-07-2012, 07:21 PM
cheers mate!
Welding and fabrication projects undertaken, contact me for more information.
23-07-2012, 09:01 AM
(22-07-2012, 07:21 PM)Jonny81191 Wrote: cheers mate! I assume that they are sat at the post office in Grange mate, I missed the postman on sat and got home to find a card through the door (arse) The Mrs is on it today so providing thats what it is then your more than welcome to come and get them later
23-07-2012, 09:04 AM
Nice one Scott, will confirm in here once I have received mine.
23-07-2012, 05:05 PM
Were these sent via ParcelForce do you know Scott?
If so, mine came today and I missed the delivery but I can collect them from the local PO tomorrow.
23-07-2012, 05:45 PM
I've also had a delivery from ParcelForce so I'm guessing that's them
24-07-2012, 05:04 PM
Ah I see, I took it that they were getting posted to you and then posting on to us after. Either way, I've got mine now as I collected them after work so thanks again for sorting this Scott as a couple of second hand sets have come up in the mean time and these were still cheaper!!
Fingers crossed they turn up soon for puglove though as can't wait to get these fitted
24-07-2012, 05:38 PM
No problem buddy I noticed a few being sold on the 6 forum for over £150! We did well
Jamie keep me updated on yours
24-07-2012, 06:11 PM
Don't want to sound stupid but I know nothing about cars, and was wondering what these actually do?
24-07-2012, 06:23 PM
It's not stupid at all There's some more info on the first page (post 10). But anyway, the rear beam mounts on 306s are rubber, which means they flex and allows for passive rear steering, however they do wear and you'll find that when they're worn your car will feel a bit tail happy under heavy braking and can oversteer fairly unpredictably. Replacing the mounts helps with this, but the solid ones remove the passive rear steering and allow more controllable lift off oversteer, as well as making it easier to brake from high speeds in a straight line.
25-07-2012, 06:40 AM
Cheers mate
25-07-2012, 06:51 AM
Got these this morning. They were left with next door yesterday. Woop long weekend this weekend so will be getting these fitted
25-07-2012, 07:08 AM
(This post was last modified: 25-07-2012, 02:14 PM by mark_airey.)
I fitted my gear links on Monday night during the rain, took way longer to get the old ones off than it took to fit the new ones but what a fooking difference! It no longer feels like its in neutral when its actually in gear
25-07-2012, 12:27 PM
I'll fit mine when it's NOT raining, much better!
Welding and fabrication projects undertaken, contact me for more information.
25-07-2012, 02:13 PM
(This post was last modified: 25-07-2012, 02:13 PM by mark_airey.)
(25-07-2012, 12:27 PM)Jonny81191 Wrote: I'll fit mine when it's NOT raining, much better! Rain didn't really effect fitting them much as I was in the garage and the roof over the garage tends to be quite a good shield against the rain
25-07-2012, 05:53 PM
Did you just take the battery box out mark or did you do it from underneath?
25-07-2012, 06:57 PM
(25-07-2012, 05:53 PM)Jonny b Wrote: Did you just take the battery box out mark or did you do it from underneath? I did it without removing anything......but then I don't have any airbox or intake piping in the way
28-07-2012, 12:19 PM
(25-07-2012, 02:13 PM)mark_airey Wrote: Rain didn't really effect fitting them much as I was in the garage and the roof over the garage tends to be quite a good shield against the rain FYC, I can't get my car in the garage, there's a boat in the way! Welding and fabrication projects undertaken, contact me for more information.
28-07-2012, 05:07 PM
Fitted my beam mounts today its like a totaly different car. I really like them
|
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Bakerbm solid mounts | 306clot | 2 | 2,259 |
09-04-2019, 06:18 PM Last Post: 306clot |
|
BakerBM Grp.N Engine Torque Reactor (lower mount) | RetroPug | 5 | 2,184 |
30-05-2017, 05:53 PM Last Post: RetroPug |
|
BakerBM Solid Rear Beam Mounts | Scott | 37 | 8,531 |
09-10-2013, 06:20 AM Last Post: Jonny b |