31-05-2016, 07:31 PM
Cheers matey appreciate the kind of offer , i have been reading a few threads with people saying about the air con mod, i just have a slight problem, i can't see or press the aircon button without taking the face of the radio
So what i'm going to do is still be using the relay setup and running a cable from the dash fuse box to the switch so only has a supply on ignition, then from the switches will run 2 cables to the coils on the relays, which means the fans will still be able to draw a full load on their own supplies from the engine bay fuse box meaning i only need to run a little cable as current only required for coils not motors.
Basically using manual switches in place of the temp sensor and ac, so both fans will be on together in either slow or high speed. This is how it looks on paper... phone.
Both off
Both low speed
Both high speed
Both switched of again from high speed
So what i'm going to do is still be using the relay setup and running a cable from the dash fuse box to the switch so only has a supply on ignition, then from the switches will run 2 cables to the coils on the relays, which means the fans will still be able to draw a full load on their own supplies from the engine bay fuse box meaning i only need to run a little cable as current only required for coils not motors.
Basically using manual switches in place of the temp sensor and ac, so both fans will be on together in either slow or high speed. This is how it looks on paper... phone.
Both off
Both low speed
Both high speed
Both switched of again from high speed