06-07-2016, 06:23 AM
(09-04-2016, 04:01 PM)ROBCAT Wrote: Valid comment Tom so I will mod it with protection. It shouldn't rub however. I used 6 pads. It's all so stretched out. My motor cosT £8. I took all the arms off so it was just a motor. The scrappy may have charged me more. I figure don't buy junk you don't need and why pay for a wiper mechanism when you only want the motor. You mount it switched off and no arms. Once you remount you run it and let it self park. That fixes where your rotating arm is positioned on spline in line with car body bulkhead member . Straght line to the primary arm . You add the reciprocating arms. Run and auto park again. Now you can add the wiper arms. Test it . Quite logical. Remember you need airspace too so keep it loose for heat exchange That seems not so important however because they stick a plastic casing over the motor. We live in countyside so have trees. Cedar and deciduous .
Greetings, i have that problem.. i fixed the motor by cleaning it but my wipers go wrong direction :d, I guessed that if its rotating system, i could have assembled it with wrong starting position, so how do i start reassembling.. the linkage should be detached at start? so that only motor is there? or should I mount motor with linkage and then adjust the arms..
thanks, my English is quite bad so could you please answer using simple words
thanks,
Zura