23-05-2012, 08:23 AM
Prime it with the bulb primer until it goes hard and slacken off the union connetions on the fuel lines where they connect to the injectors and then get someone to turn it over (do it in busts or 5-10 seconds to save killing the starter motor........) until you get diesel coming from the lines at the injector end as as you start getting squirts out of the slackened connections nip them up one by one.
It wouldn't hurt to crack off one fuel line on the pump end of the lines and turn it over with the key just to make sure that there is fuel coming from the pump before doing the above
It wouldn't hurt to crack off one fuel line on the pump end of the lines and turn it over with the key just to make sure that there is fuel coming from the pump before doing the above