Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Farewell forum
#3
(21-04-2025, 10:20 PM)Mighty306 Wrote: You're right, from a new post point of view the forum is pretty much dead.  The process of decline started a long time ago.  By 2021 I was one of the few Moderators left who was keeping the site free of trash, but it was becoming increasingly impossible.  Bots were creating dozens of accounts a day and plenty of them were spawning nuisance threads that had to be manually deleted.  It wasn't feasible for me to continue doing it on my own considering genuine traffic on the site had already fallen off a cliff at that point.  Facebook was partly to blame for that.

I had a discussion with Fooby, who hosts the site, at the time.  It runs on an old platform with significant limitations & the only real solution to blocking all of the spam was to stop access for new members.   Sadly that was always going to sound the final death knell for further contributions, other than from the handful of still active members.

It's not just here that's quiet though.  There's barely any activity these days on the 306GTi6 forum.  I'm a member on Peugeot Forums but the 306 section on that has hardly any activity on it either.  The fact, relatively speaking, there aren't that may 306's left.  In the UK there are quite a few SORN'ed but many are projects that are never going to get completed.

Despite the situation, I had a conversation with Fooby very recently & he is still committed to keeping the site hosted as a resource to help any future 306 owners.  I seriously take my hat off to him for doing that.  I still point people towards the forum as I know there are threads on here that will be helpful to people.

Anyway, I have two 306 XSi's which are in the process of being cleaned up.  The rear end of one is pretty much done, but don't have any pics of that.  Here's a pic of the other, which didn't require any welding, but a lot of cleaning up.  Wire wheel, grinder, multiple treatments with Bilt Hamber Deox Gel, before spraying with Miparox, primer & top coat.  The rear beam has been rebuilt to go back on & have restored all of the other parts for the rear, or have new (such as mounts & dampers).  It's getting new brake lines front to back, some of which have already been made up.  Should have some time to get back on it soon.

Have you still got a 306 on the road?

I actually came back here when I found a picture of my first one. Scrapped it because at the time it wasn't worth the price of a near rear axle. This was about 8 years ago if I remember right. Not sure there's any in that colour still around (Champagne). I do however have one still on the road as a daily (the blue one). Plan to keep it on the road indefinitely until it becomes worth someone stealing then would have to sell

(21-04-2025, 10:20 PM)Mighty306 Wrote: You're right, from a new post point of view the forum is pretty much dead.  The process of decline started a long time ago.  By 2021 I was one of the few Moderators left who was keeping the site free of trash, but it was becoming increasingly impossible.  Bots were creating dozens of accounts a day and plenty of them were spawning nuisance threads that had to be manually deleted.  It wasn't feasible for me to continue doing it on my own considering genuine traffic on the site had already fallen off a cliff at that point.  Facebook was partly to blame for that.

I had a discussion with Fooby, who hosts the site, at the time.  It runs on an old platform with significant limitations & the only real solution to blocking all of the spam was to stop access for new members.   Sadly that was always going to sound the final death knell for further contributions, other than from the handful of still active members.

It's not just here that's quiet though.  There's barely any activity these days on the 306GTi6 forum.  I'm a member on Peugeot Forums but the 306 section on that has hardly any activity on it either.  The fact, relatively speaking, there aren't that may 306's left.  In the UK there are quite a few SORN'ed but many are projects that are never going to get completed.

Despite the situation, I had a conversation with Fooby very recently & he is still committed to keeping the site hosted as a resource to help any future 306 owners.  I seriously take my hat off to him for doing that.  I still point people towards the forum as I know there are threads on here that will be helpful to people.

Anyway, I have two 306 XSi's which are in the process of being cleaned up.  The rear end of one is pretty much done, but don't have any pics of that.  Here's a pic of the other, which didn't require any welding, but a lot of cleaning up.  Wire wheel, grinder, multiple treatments with Bilt Hamber Deox Gel, before spraying with Miparox, primer & top coat.  The rear beam has been rebuilt to go back on & have restored all of the other parts for the rear, or have new (such as mounts & dampers).  It's getting new brake lines front to back, some of which have already been made up.  Should have some time to get back on it soon.

Have you still got a 306 on the road?

I actually came back here when I found a picture of my first one. Scrapped it because at the time it wasn't worth the price of a new rear axle. This was about 8 years ago if I remember right. Not sure there's any in that colour still around (Champagne). I do however have one still on the road as a daily (the blue one). Plan to keep it on the road indefinitely until it becomes worth someone stealing then would have to sell


Attached Files Image(s)
       
Reply
Thanks given by:


Messages In This Thread
Farewell forum - by Charlie0 - 19-04-2025, 09:21 AM
RE: Farewell forum - by Mighty306 - 21-04-2025, 10:20 PM
RE: Farewell forum - by Charlie0 - 21-04-2025, 11:56 PM
RE: Farewell forum - by Mighty306 - 22-04-2025, 09:23 AM
RE: Farewell forum - by Charlie0 - 22-04-2025, 09:21 PM
RE: Farewell forum - by Mighty306 - 24-04-2025, 09:08 AM
RE: Farewell forum - by Mighty306 - 24-04-2025, 10:10 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  So long and farewell lewisdmz 24 4,234 10-08-2014, 04:19 PM
Last Post: Razorback_Rob

Forum Jump:


Users browsing this thread: 1 Guest(s)