16-07-2018, 08:03 PM
Disconnect battery for 30min.
Then plug them all back as they should. Reconnect.
You'll spend ages trying to meter out the wires from the doors. First unplug the loom from the door and check for corrosions/gunk. Then use a blade and slice the boot open carefully, soon see any bad wires. Repair and tape up. Tape up anyway if no damage found...but have a good dig
Then plug them all back as they should. Reconnect.
You'll spend ages trying to meter out the wires from the doors. First unplug the loom from the door and check for corrosions/gunk. Then use a blade and slice the boot open carefully, soon see any bad wires. Repair and tape up. Tape up anyway if no damage found...but have a good dig
Wishes for more power...