16-07-2018, 03:50 PM
(This post was last modified: 16-07-2018, 08:04 PM by Smokey Smokes.)
(16-07-2018, 05:29 AM)Piggy Wrote: Door loom wiring failures cause lock issues, it's the wiring between A pillar and the door
thanks for the response, ive seen a few of your YT vids! ive checked the driver door and saw a couple broken wires so i put in some temporary wires because i couldent get in very well because the rubber being in the way is there not any better way to get in to do the job properly ? dash out ? door off maybe ? ive had a quick look at the passenger door and a few wires looks like they are split but not broken so once i manage to do the driver door properly ill do the same on the passenger side
I removed the driver seat lastnight to look at the wires and it only has the pretensioner connector on the seat, not the side airbag and earth connector, but the wire coming from the floor has all 3 connectors and wires are undamaged, so is this a case of just connecting the pretentioner connector and then joining the wires from the unused airbag and earth connectors to make the light go out or will this trigger the airbags instead LOL