02-07-2017, 08:30 AM
The pump itself was an ebay purchase (I never learn) some time ago. It came from Northern Ireland and looks to have been modified. I'm not sure how far or how well. So a rebuild/reseal/inspection is required. I've never done it before, so expect some technical questions in the XUD section about what is required for the state of tune I'm after (somewhere about stage 1 or 2).
I won't be starting work on the car itself for a few weeks (until the V5 is in my name). I may try test fitting the 806 inlet manifold on the (broken) engine in the car to see if it a feasible way to go to a front mounted intercooler. I also need to find out which turbo is fitted to the car. The 806 turbo has a different orientation so might not fit in the car.
Mods to the car will also be fairly mild - slightly uprated brakes and suspension.
I won't be starting work on the car itself for a few weeks (until the V5 is in my name). I may try test fitting the 806 inlet manifold on the (broken) engine in the car to see if it a feasible way to go to a front mounted intercooler. I also need to find out which turbo is fitted to the car. The 806 turbo has a different orientation so might not fit in the car.
Mods to the car will also be fairly mild - slightly uprated brakes and suspension.