Ozonehostiles Blurple gti6.

[ozonehostile]

Again, like Piggy I'm rather excited to see this in the flesh but shouldn't the discs be the other way round?

Aha you're not the first person to bring it up, I've talked to loads of people about it and basically come to the conclusion that the fins should be cutting into the pad and then centrifugal force flings hot dust out. I've had them both ways around and noticed no difference so I'll just stick with what motorsporty type people have told me

---

Looks so nice!!  Be a shame to take it outside and ruin it now.

Aha it will be kind of heartbreaking to take it out of the unit and across the gravely mud outside

---

Another good day spent on the car, although annoyingly it isn't quite ready to get on its wheels and road test yet, mostly due to having to work around problems that I've created by moving things around under the bonnet. 

With the new epas setup there was no longer any room for the original air intake setup I made so after about an hour of trying to move it around in a load of different places I've just had to put the biggest filter I could fit straight on the throttle body then make as good an air flow I could with the space given. 

Next problem, getting reverse to engage with the new quickshift. Lots of fiddling around with collars and shaft length (inb4giggedy) again. 

All front end went back together with no problems, become quite quick with the old 306 face on/off routine haha 

Oil changed, new spark plugs, new gear oil including redline lsd additive, thankfully there are no leaked from the diff housing, cooling fans wired in, epas pump wired in, coolant bled, interior reassembled, handbrake cables tensioned, and replaced all the tarnished engine bay bolts I could find with nice new ones 
   


I'll be straight over after work tomorrow to get the last few jobs done