04-04-2012, 01:58 PM
Dan! Wrote:Okay, no problems there then
One last question which is off topic-ish, but I wont start another thread
How do you clock a TD04?
From what I can see the compressor is done by nipping in the internal circlip then tapping the compressor housing round? And the exhaust side has a clamp on it, which I removed, then soaked in WD40, then tried twist/hitting but to no avail? Do I just need more force or is there some magical trick I am missing?!
You need to take the circlip out and then take the comp housing off, (should knock off fairly easily just make sure it comes off straight) you can't just knock it round as it has a locating pin
if you just smash it round you will ruin the cartridge and the housing. remove the pin once you get the housing off.The exhaust side, if you have removed the clamp and WD40 soaked it you just need to bash the hell out of it, just keep working your way round with a big hitting stick but it will be a nightmare, also once it's moving make sure it doesn't go to far to on side as you will bend the blades on the turbo
