Turbo adapter plates

[darrenjlobb]

If it was me, id just blast the plate onto the manifold with the arc, and then bolt it to the new turbo so it can be removed easily, when you have a single plate adapter, two sets of bolts can be a bit of a faff, but obviously possibly, and would avoid having to weld it.... Anyone with any welding experience would be able to weld it fairly easily... I did mine / Ruans and it worked just fine, both still going to this day, altho mine is now on someone elses car. Any old bolts will do tbh, just make sure you use some paste on the flanges as itl blow otherwise unless you get plates lapped, especially if you weld them as they will twist like a sunt.