02-12-2015, 01:16 PM
Another update Probably an excessive amount of photos for such a small mod, but hell, I like taking photos
Bought a dewiper bung from eBay. A proper one with a screw on the back, so no one can push the bung/grommet in!
Removed arm a few days ago to make sure I could live with no rear wiper. Doesn't bother me, so after removing the 13mm nut holding the arm on, you're left with this
Molegrips to carefully unwind the top cap. Its threaded, but plastic. Mine didn't break, came off easily
Remove x2 10mm bolts holding on the motor itself, along with the hose for wash. I bunged with a random bolt & cable tie
Disconnect both plugs, I then tapped them to prevent any possible shorts
Cleaned everything up, black sealant under the bung, tightened up, then re-applied Rain-X everywhere (I live by this stuff!)
Job done
Looks a lot cleaner I think! But serious requirement for lowering now, haha!
Bought a dewiper bung from eBay. A proper one with a screw on the back, so no one can push the bung/grommet in!
Removed arm a few days ago to make sure I could live with no rear wiper. Doesn't bother me, so after removing the 13mm nut holding the arm on, you're left with this
Molegrips to carefully unwind the top cap. Its threaded, but plastic. Mine didn't break, came off easily
Remove x2 10mm bolts holding on the motor itself, along with the hose for wash. I bunged with a random bolt & cable tie
Disconnect both plugs, I then tapped them to prevent any possible shorts
Cleaned everything up, black sealant under the bung, tightened up, then re-applied Rain-X everywhere (I live by this stuff!)
Job done
Looks a lot cleaner I think! But serious requirement for lowering now, haha!