21-11-2015, 01:33 PM
Hdi rods aren't indestructible!
As for wiring for the lights, if you get a set of ph2/ph3 front lights and smash the connectors out of them, you can make plug and play looms for ph1 headlights
The rear lights are a different story. You could get a set of Lexus light looms for a ph2/3 and then get a ph1 wiring loom from a scrapper and make looms up that way. Or like I did just solder ph1 loom onto ph3 wiring.
Bit of messing to get ph1 tailgate up and running as ph1 has washer jet on wiper arm as opposed to at the top of the tailgate, and also wiring runs up different sides of the tailgate for the wiper motor.
Rest is easy enough.
As for wiring for the lights, if you get a set of ph2/ph3 front lights and smash the connectors out of them, you can make plug and play looms for ph1 headlights
The rear lights are a different story. You could get a set of Lexus light looms for a ph2/3 and then get a ph1 wiring loom from a scrapper and make looms up that way. Or like I did just solder ph1 loom onto ph3 wiring.
Bit of messing to get ph1 tailgate up and running as ph1 has washer jet on wiper arm as opposed to at the top of the tailgate, and also wiring runs up different sides of the tailgate for the wiper motor.
Rest is easy enough.