24-10-2015, 04:11 PM
Will
The tray should do its job well, its only there to stop the pipes scraping curbs etc, tbh since its been fitted Ive only driven the car for about an hour total and they don't get knocked all the time anyway, just an extra bit if protection as they were getting dented and scraped.
As for mounting we bolted a piece of angle iron to the frot cross member i guess you would call it (were the rad sits) and then used 3 bolts with crush tubes and washers and at the rear one leg went onto an exiting mount nut and the other side we just drilled a new nut and bolt. You can see the bolts in the pics.
procta
As for the leds i used these - http://www.ebay.co.uk/itm/10x-XENON-HID-...C6KyQLumNA.
Best off getting these as you get new lamp holders as the original ones can come lose and then your bulbs go out, thats why i had dark spots as mentioned, above. For the heater controls there called BAX lamps, they have the metal contacts on the back of the lamp holders, but i can find any to link you to. I think on older models of the 306 there either different or you cant change them but don't quote me on that.
The tray should do its job well, its only there to stop the pipes scraping curbs etc, tbh since its been fitted Ive only driven the car for about an hour total and they don't get knocked all the time anyway, just an extra bit if protection as they were getting dented and scraped.
As for mounting we bolted a piece of angle iron to the frot cross member i guess you would call it (were the rad sits) and then used 3 bolts with crush tubes and washers and at the rear one leg went onto an exiting mount nut and the other side we just drilled a new nut and bolt. You can see the bolts in the pics.
procta
As for the leds i used these - http://www.ebay.co.uk/itm/10x-XENON-HID-...C6KyQLumNA.
Best off getting these as you get new lamp holders as the original ones can come lose and then your bulbs go out, thats why i had dark spots as mentioned, above. For the heater controls there called BAX lamps, they have the metal contacts on the back of the lamp holders, but i can find any to link you to. I think on older models of the 306 there either different or you cant change them but don't quote me on that.
SC GTI6 - Sold
1984 Ford Capri - Current Money Pit
1984 Ford Capri - Current Money Pit