Ph1 Diablo D-turbo - Being Broken Up!

[Jenkosowls]

Well just like JP did on his car today a set about putting an intercooler sprayer on the car. I had also done the same on my old 207 to which the bits i had on that had gone on to this. The only thing im not happy about is iv had to use the washer bottle as a source of water for it. Reason i not happy is i know how much water these can use and i dont like runnig on an empty washer bottle but thats just me!

This is what it was like on my 207


I had done this one so that when full throttle was engaged it would soak the cooler when it was needed to be cooled most. trouble was this ment the seperate botttle i had for it needed to be topped up every couple of days! and running empty was crazy!

So i had some how managed to loose my secound water jet and only had the one now as i know im going to be going front mount i didnt make a high finish that i always try to acheive so i just cable tied it to the cooler and left it be. The jets iv got are of a laguna i think it was and so are adjustable in height. Im going to find the 2nd and place that on the opposite side.

In action


And in action in the car by using the cooler guage i have placed in the car.


As you can see it peaks at 35c this was when i started the sprayer it holds as the sprayer is competing with the boost temps then gradually starts to drop so it does work! Usually with out the sprayer the temps will exceed well over 35c to even past 45c so for this to compete against full throttle boost temps and cool it down while still on full boost shows they do work.