25-03-2015, 08:03 PM
Heh, no point covering up the cock ups, I learn everything I do via cock ups! There have been many over the years!
As for steels, can see your point, but for me, something like that id rather let a "professional" or at least someone i thought that was do it, given they need to be round / safe etc...nothing against what you have done, but last thing i want is to be worrying about a wheel i welded up flying apart etc, as it happens I could have done a better job anyway but will have to see what to do about this situation at some point!
As for flatting the paint, One part of me still really wants to have an attack again at it, because its a fairly good finish now, just quite a bit of orange peel in it, but to scared to flat it cock / cock it over!
As for steels, can see your point, but for me, something like that id rather let a "professional" or at least someone i thought that was do it, given they need to be round / safe etc...nothing against what you have done, but last thing i want is to be worrying about a wheel i welded up flying apart etc, as it happens I could have done a better job anyway but will have to see what to do about this situation at some point!
As for flatting the paint, One part of me still really wants to have an attack again at it, because its a fairly good finish now, just quite a bit of orange peel in it, but to scared to flat it cock / cock it over!
| Dyno Power Runs & Steady State Facilities Available, Just Ask Anytime |
| #DervMafia |
![[Image: sigi-2.png]](http://i281.photobucket.com/albums/kk226/darrenjlobb/sigi-2.png)
| #DervMafia |