stef's 205 gti6 supercharged

[Stef205]

Havent done alot to the car lately but ive finally made a start on my seat rail and harness points. The original mountings had cracked and bent fairly bad and was noticeable by the passengers seat.  So i removed the original mounting by drilling the spot welds which was very time consuming and some took the floor with it leaving some small holes. I filled the holes with some welds then started to fit the new rail tubes. I have used 26mm cds gas tube which i was given nearly 5 meters for £10. I have also welded in the 5th and 6th harness points using some threaded inserts, I then braced the tube with some 4mm plate and tacked it to the body. 



I then turned my attention to the handbrake surround as it was badly cracked and so was the handbrake lever mounting holes.




I then cut the cracked metal out and plan to plate it and spot weld it to the handbrake mounting.


All for now

Stef