![]() |
stef's 205 gti6 supercharged - Printable Version +- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum) +-- Forum: Other Marques (https://www.306oc.co.uk/forum/forumdisplay.php?fid=38) +--- Forum: Projects (https://www.306oc.co.uk/forum/forumdisplay.php?fid=39) +--- Thread: stef's 205 gti6 supercharged (/showthread.php?tid=24574) |
stef's 205 gti6 supercharged - Stef205 - 11-06-2014 hi some of you may know me or have seen the car, this is my 205 gti ive owned the car for about 3 years now. Ill try keep you up to date with my progress. Rather than spend much time writing up the progress of previous work ill leave a link for you to read. http://forum.205gtidrivers.com/index.php?showtopic=135465&page=1 Spec list of the top of my head Engine and Transmission 306 gti engine eaton m45 supercharger 55mm pulley omex 600 ecu custom inlet reangled manifold 3 box 2.5" exhaust system 1900 gearbox renualt 5 gt turbo radiator 16 row mocal oil cooler 380cc injectors 2.5 map sensor walbro 255 fuel pump various silicone hoses 3 bosch dump valves rose jointed gear rods suspension, brakes, wheels and tyres Nissan skyline r33 gts front calipers 283x26mm brembo max discs braided brake hoses 32mm rear calipers 309 gti axle 24mm arb 22mm torsion bars soild mounts seam welded subframe 309 gti wishbone 309 gti shafts koni adjustable front shocks apexi -30 springs rose joint drop links team dynamics pro race 1.2 15x7 ad08r 195/50/15 Body Non sunroof shell omp strut brace fibreglass bonnet st tropez front valance roof mounted camera Full omp cage with additional bars cobra monaco bucket seats with 4 point harnesses. power is unknown at this stage, i had it mapped '3psi and it made 205bhp, i am currently hovering around 7-8psi atm, the has since been mapped again by Sandy Brown. ![]() ![]() ![]() ![]() Ill leave a link of a little power run during the mapping session with sandy. ![]() Stef ![]() RE: stef's 205 gti6 supercharged - aggyj17 - 11-06-2014 This looks awsome mate. Bet she goes well I'll be keeping an eye on this RE: stef's 205 gti6 supercharged - Jimbo - 11-06-2014 Very nice mate, seen a few pics of this floating around Sure ive seen this in seaton a few times too RE: stef's 205 gti6 supercharged - Stef205 - 11-06-2014 yeah you would have seen it in seaton, well know at partservice. (11-06-2014, 09:22 PM)aggyj17 Wrote: This looks awsome mate. Bet she goes well I'll be keeping an eye on this thanks its goes well enough for me, was a gamble at the start seems to be working out. RE: stef's 205 gti6 supercharged - Stef205 - 12-06-2014 few videos of the car at my local drag and drift event in march. https://www.youtube.com/watch?v=dhU1Ubstbzs https://www.youtube.com/watch?v=HfNgtVAS-Xc https://www.youtube.com/watch?v=By0z0Cb9hes apologies for the quality, It was the first event i had ever done with the car, never even launched it so was a real learning curve. RE: stef's 205 gti6 supercharged - ozonehostile - 13-06-2014 Awesome, saw it at fcs and had a quick nosey, didn't realise it was xu10 powered nor supercharged haha. Is that also a mk1 clio 16v bonnet bulge? RE: stef's 205 gti6 supercharged - silverzx - 13-06-2014 Are those 200SX S14 calipers/brakes? RE: stef's 205 gti6 supercharged - Stef205 - 13-06-2014 (13-06-2014, 06:19 AM)ozonehostile Wrote: Awesome, saw it at fcs and had a quick nosey, didn't realise it was xu10 powered nor supercharged haha. yes it is, the bonnet is going soon, it was made by a surfboard company in cornwall doesnt fit very well. (13-06-2014, 08:02 AM)silverzx Wrote: Are those 200SX S14 calipers/brakes? they were off a r33gts same shape but they dont have fins on them. RE: stef's 205 gti6 supercharged - silverzx - 13-06-2014 Did it take much to get them fitted? I have a spare set of 200SX S14/a calipers lying around.. Where in the SW are you? RE: stef's 205 gti6 supercharged - Stef205 - 13-06-2014 Yes it did take a lot tbh milling of the caliper and brackets, new wheels, custom disc etc. Just swap them for some 406 brembos a lot easier. I'm in lyme regis on the south coast. RE: stef's 205 gti6 supercharged - ozonehostile - 13-06-2014 Just read it again, 205bhp is awesomely appropriate ![]() RE: stef's 205 gti6 supercharged - Stef205 - 13-06-2014 Yes it was the perfect power fiqure if you ask me ![]() RE: stef's 205 gti6 supercharged - Niall - 13-06-2014 (13-06-2014, 02:50 PM)Stef205 Wrote: Yes it did take a lot tbh milling of the caliper and brackets, new wheels, custom disc etc. Just swap them for some 406 brembos a lot easier. I'm in lyme regis on the south coast. I wouldn't bother with 406 brembos. So many of them squeal horrendously and apparently there is one set of discs that stop that....at £220 a set ![]() RE: stef's 205 gti6 supercharged - Stef205 - 13-06-2014 My £23 callipers don't squeal one bit! Ha RE: stef's 205 gti6 supercharged - mikey b - 14-06-2014 Just seen you down Lyme sound cool were about are you from I am only in Colyton RE: stef's 205 gti6 supercharged - Stef205 - 14-06-2014 (14-06-2014, 08:57 PM)mikey b Wrote: Just seen you down Lyme sound cool were about are you from I am only in Colyton Lyme ![]() RE: stef's 205 gti6 supercharged - mikey b - 15-06-2014 Ah cool explans why I saw ya there next time we have a south west meet you will ave to pop along your car sounds sweet chap RE: stef's 205 gti6 supercharged - Stef205 - 16-06-2014 yesterday i decided to do abit of tidying up, many repaint a few things. I also went about finding my boost leak that ive been suffering with but i was only able to check the pipes and intercooler as i am unable to pressurize through the charger as it has a odd inlet shape and nothing will seal to it, So i cracked out the redneck boost leak tester. ![]() found a few pin holes, and a leaking join cause by a dodgy clamp. Now averaging around 7-8psi Fitted the new strut brace to replace the rubbish etech brace which im sure is made from recycled bake bean tins! also replaced the m7 bolts in the top struts that where slighly bent ![]() ![]() also thought id tease niall so i hooked the airline up to the boost gauge and sent him his picture. ![]() ![]() Finally refitted my rear quarter red trim that had been missing for some time now. I had to make it out of a old door trim with the help of the grinder. ![]() RE: stef's 205 gti6 supercharged - ozonehostile - 16-06-2014 I'm glad it's not just me who doesn't think much of those etech braces, took one off a car, leaning on it when I was taking to someone and could feel it flexing in my hand lol. That new one an omp brace? Seem to be far more substantial than most haha RE: stef's 205 gti6 supercharged - Stef205 - 16-06-2014 Yes it's a omp brace, no flex from it. It wasn't new in fact it was in a poor state when I bought it, I stuck it in the blaster and painted again. RE: stef's 205 gti6 supercharged - Stef205 - 25-06-2014 Done abit of work to the 205 over the last few days. My red carpet was getting blacker and blacker everyday so i decided to change it for a plain black carpet. Took the advantage and repainted the cage and also bought some new seats as i was falling out of the old seats. Ive yet to sort out some new harnesses but will more than likely go for some 5 points. ![]() ![]() I also picked up some group n mounts from stew at fcs so ive started to fit them, already noticed the difference. ![]() ![]() Ive been wanting to keep a eye on the charger temp and air temp, so i bought afew small digital read outs with probes which seem to give me a rough idea. ![]() Painted my spare set of cam covers as the old ones had seen better days. ![]() Stef ![]() RE: stef's 205 gti6 supercharged - procta - 25-06-2014 looking good! RE: stef's 205 gti6 supercharged - mr_fish - 25-06-2014 tidy install ![]() must be a right hoot to drive! RE: stef's 205 gti6 supercharged - Stef205 - 25-06-2014 It doesn't really drive any different which is what makes it good, only until you stick your tow down does it become different. The real only differences is the noise and looks you get from driving it. RE: stef's 205 gti6 supercharged - HDIkyle - 27-06-2014 Nice but 3 dump valves? RE: stef's 205 gti6 supercharged - Stef205 - 27-06-2014 Yes 3. I've done a lot of testing with the dump valves. The problem is that you always have boost pressure in the pipes. When I was running a single valve my data logs showed there was still a lot of pressure against the tb causing inlet chatter and feedback on the rotors. RE: stef's 205 gti6 supercharged - Niall - 28-06-2014 (27-06-2014, 11:18 PM)Stef205 Wrote: Yes 3. I've done a lot of testing with the dump valves. The problem is that you always have boost pressure in the pipes. When I was running a single valve my data logs showed there was still a lot of pressure against the tb causing inlet chatter and feedback on the rotors. Which is exactly what has destroyed my snout coupler I think ![]() RE: stef's 205 gti6 supercharged - Stef205 - 28-06-2014 Sandy described it as the equivalent of turbo chatter. RE: stef's 205 gti6 supercharged - Stef205 - 30-06-2014 so my spoiler has finally arrived from france. I have been wanting something different as to me the rear just look bland. test fit ![]() ![]() over this coming week ill get some paint on it and get it mounted. RE: stef's 205 gti6 supercharged - Seb_Ryan - 30-06-2014 I actually quite like that.. |