10-12-2014, 08:24 AM
It makes it a bit easier but you don't need to remove the slam
Unplug wiring loom
Disconnect fuel pipes, coolant pipes and PAS pipes
Pull the shafts
Disconnect gear linkage and exhaust.
Remove airbox n battery.
Connect a engine crane
Remove engine mounts.
Lift out
Unplug wiring loom
Disconnect fuel pipes, coolant pipes and PAS pipes
Pull the shafts
Disconnect gear linkage and exhaust.
Remove airbox n battery.
Connect a engine crane
Remove engine mounts.
Lift out
Wishes for more power...