02-11-2014, 03:23 PM
(02-11-2014, 03:12 PM)Orta Wrote: I've seen 306s with an empty back and just harness bars across the rear arches and they've been thru mots? Friendly garages maybe?
(02-11-2014, 03:19 PM)SRowell Wrote: okay you have a few options....
So for the cheap ass and daily you can get 3 point harnesses and bolt into the original seatbelt bolts and the rear seatbelt holes. Problem is it puts the harness at a steep angle which in a crash could crush you. I believe it should be something like 10 degrees less than horizontal at a maximum!
Other option is to get a 4 point harness and go to a harness bar welded between the rear arches
Another option is to get a 4 point harness and go to a tegiwa harness bar mounted up high behind the seats.
Or the best option is to get a full cage and get the harness bars welded in.
Thing is you need to weld a lot if extra material in to the wheel arches to make them strong enough not to be ripped apart in the event of an accident TV