So, goodies
Engine mounts
![[Image: 10494535_10154238570900062_6126047434050643559_n.jpg]](https://scontent-a-lhr.xx.fbcdn.net/hphotos-xpa1/t1.0-9/10494535_10154238570900062_6126047434050643559_n.jpg)
BakerBM axle mounts (cheers Grant)
![[Image: 10592800_10154441309265062_919006811488967297_n.jpg]](https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xpa1/t1.0-9/p526x296/10592800_10154441309265062_919006811488967297_n.jpg)
Got the aircon heater holes welded up (both got cleaned up and painted since)
![[Image: 10616675_10154441309275062_2595793997028384604_n.jpg]](https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xfp1/t1.0-9/10616675_10154441309275062_2595793997028384604_n.jpg)
Cut the hole for the non-aircon heater to draw air in
![[Image: 10451895_10154444832820062_6347500255986166586_n.jpg]](https://scontent-a-lhr.xx.fbcdn.net/hphotos-xpa1/t1.0-9/10451895_10154444832820062_6347500255986166586_n.jpg)
The lower hole which the aircon pipes ran into will eventually be drilled so i can run cables for a battery to be placed in the boot, and because of the size of the intercooler ill probably have to stick the washer bottle in there too
Getting there
Engine mounts
BakerBM axle mounts (cheers Grant)
Got the aircon heater holes welded up (both got cleaned up and painted since)
Cut the hole for the non-aircon heater to draw air in
The lower hole which the aircon pipes ran into will eventually be drilled so i can run cables for a battery to be placed in the boot, and because of the size of the intercooler ill probably have to stick the washer bottle in there too
Getting there