25-07-2014, 07:20 AM
(This post was last modified: 25-07-2014, 07:38 AM by strictly_perv.)
GT2052s welded to manifold, mandrel 90 deg 2.5 bend welded on with flexi and reducer to fit standard exhaust. It will come with a proper braided oil line to fit into the block.
It's un tested on a car, I went to put it on a car but had oil feed issues with the engine so never used it.
Bulk head smashing me be required due to the housing.
£150 plus post
2x K14/T2 manifolds ideal for mocking up turbos
£15 each
K14 elbow
£5
Oil cooler kit with braided lines
£70 plus post
Various LDA caps and pins
Offers
CG sprung paddle with pressure plate 500 miles old
£100
1x anthracite Cyclone with Michelin pilot tyre £20
I will update with more bits later on.
Thanks
It's un tested on a car, I went to put it on a car but had oil feed issues with the engine so never used it.
Bulk head smashing me be required due to the housing.
£150 plus post
2x K14/T2 manifolds ideal for mocking up turbos
£15 each
K14 elbow
£5
Oil cooler kit with braided lines
£70 plus post
Various LDA caps and pins
Offers
CG sprung paddle with pressure plate 500 miles old
£100
1x anthracite Cyclone with Michelin pilot tyre £20
I will update with more bits later on.
Thanks
Stage 2 XUD Sedan
