08-07-2014, 10:46 PM
Past few months I've been gathering parts and trying to get all the smaller jobs done and dusted.
Recently my 306 brakes have been on the crap side, so instead of cleaning them up and re greasing them I fitted the calipers off my 205. This, unfortunately meant I had to get bigger brakes for it so I present Lucas 266mm-
![[Image: 20140521_190606_zpsge7mj6ro.jpg]](http://i4.photobucket.com/albums/y113/petedut/20140521_190606_zpsge7mj6ro.jpg)
.^^^ When they arrived I got them into work and shot blasted them, ready for painting. Usually I'm not into fannying round painting stuff but I gave them a good dose of hammerite smooth. Could probably do with another layer before going on the hubs-
![[Image: 20140708_223416_zpsudzvu3b4.jpg]](http://i4.photobucket.com/albums/y113/petedut/20140708_223416_zpsudzvu3b4.jpg)
So, knowing that the 266mm setup won't fit under 14" 205 alloys without help I set about getting bigger alloys. A trip to Chesterfield later I had these puppy's in the boot-
![[Image: 20140708_224133_zps0plzqs8f.jpg]](http://i4.photobucket.com/albums/y113/petedut/20140708_224133_zps0plzqs8f.jpg)
Also picked up a starter on way back through ( cheers Chris-90, made a hell of a difference on the 306)
The wheels could do with a refurb which will have to wait till a later date. Have more updates once I sort the pics out
Recently my 306 brakes have been on the crap side, so instead of cleaning them up and re greasing them I fitted the calipers off my 205. This, unfortunately meant I had to get bigger brakes for it so I present Lucas 266mm-
![[Image: 20140521_190606_zpsge7mj6ro.jpg]](http://i4.photobucket.com/albums/y113/petedut/20140521_190606_zpsge7mj6ro.jpg)
.^^^ When they arrived I got them into work and shot blasted them, ready for painting. Usually I'm not into fannying round painting stuff but I gave them a good dose of hammerite smooth. Could probably do with another layer before going on the hubs-
![[Image: 20140708_223416_zpsudzvu3b4.jpg]](http://i4.photobucket.com/albums/y113/petedut/20140708_223416_zpsudzvu3b4.jpg)
So, knowing that the 266mm setup won't fit under 14" 205 alloys without help I set about getting bigger alloys. A trip to Chesterfield later I had these puppy's in the boot-
![[Image: 20140708_224133_zps0plzqs8f.jpg]](http://i4.photobucket.com/albums/y113/petedut/20140708_224133_zps0plzqs8f.jpg)
Also picked up a starter on way back through ( cheers Chris-90, made a hell of a difference on the 306)
The wheels could do with a refurb which will have to wait till a later date. Have more updates once I sort the pics out
