Gearboxes - cable selectors ?

[nominous]

So I saw this on ebay which is why I raised the question, because for my transplant I need to use cable selector:

http://www.ebay.com/itm/Peugeot-406-2-0-...338cbbf446




So that auction says that's a 406 HDi cable linkage.
But I read your reply that you don't need to do a cable conversion.

What if I want to do it

Which boxes fit a XUD and come with a cable linkage, or can I convert the 306 standard box with a solid linkage to cable linkage ?

---

Half the battle is knowing the codes.
The forum search wont let you do below 4 chars.
Thanks for point out it's a BE box, specifcally a BE3 ?

So I do find there are options:

http://forum.205gtidrivers.com/index.php...pic=144519

With a certain WelshPug saying:

Correct Ant, every D8 I've done a clutch on has been a 1.9 DT with a BE3/4 box and gear rods.

The 2.1 TD and the 2.0 Turbo used ML boxes and cables in a D8, all the same cables as the V6, other than the rare D8 DW10.

looks like the D9 also uses rods on the BE3/4 box other than on the EW engines (which would be XU5/7 and 10), DW's use ML which are all cable.

That thread has been updated more recently with a link to an aftermarket solution but that the BE4's are cable and that the mounts should be the same.

Incidentally, I found another motorsports place selling a rod and cable linkage which looked like it came with the same brackets.

So do you think a BE4 cable solution will do it (not that I know what a BE4 comes in yet, but google is my friend ) ?