I had a look at the fuel filter housing and I couldn't see any obvious fuel leaks. I'm not sure how I would go about checking them though.
I measured the voltage across each plug and with 12.8v at the battery, I got 11.8 at the plug in the middle of the loom (3rd from left), 11.5 at those either side (2nd and 4th from left) and only 11.1 at the other (1st from left, farthest from the point where the loom connects). Could they voltage drop be enough to cause the plug to not work correctly? I'm trying to avoid having the pull the plugs as the one behind the pump is an absolute bastard...
I measured the voltage across each plug and with 12.8v at the battery, I got 11.8 at the plug in the middle of the loom (3rd from left), 11.5 at those either side (2nd and 4th from left) and only 11.1 at the other (1st from left, farthest from the point where the loom connects). Could they voltage drop be enough to cause the plug to not work correctly? I'm trying to avoid having the pull the plugs as the one behind the pump is an absolute bastard...