29-03-2014, 05:36 PM
Right incase anyone is still interested I started today by putting the rear seats from a 3 door to fit in my 5 door properly so they click in.
[attachment=14742]
So undo the rear covers on the zips
Also undo the two torx screws that hold the catch bit in place [attachment=14743]pull the seat cover forward. You can now put your hand inside and unclip the headrest bits. Two tags either side squeeze together and pull out from the top[attachment=14744]slide the.new seat cover in do the zips up and push the headrest bits back in. They will click back Into place.
You will be left with an odd shape hole that the 3 door cover has that 5 door doesn't you need to mod it like this
[attachment=14746] screw the cover back on. Now they fit and click in [attachment=14747] and half way done. I'm going to do the fronts soon. Can put up how to swap the fronts soon when I do them if you need to.know.
[attachment=14742]
So undo the rear covers on the zips
Also undo the two torx screws that hold the catch bit in place [attachment=14743]pull the seat cover forward. You can now put your hand inside and unclip the headrest bits. Two tags either side squeeze together and pull out from the top[attachment=14744]slide the.new seat cover in do the zips up and push the headrest bits back in. They will click back Into place.
You will be left with an odd shape hole that the 3 door cover has that 5 door doesn't you need to mod it like this
[attachment=14746] screw the cover back on. Now they fit and click in [attachment=14747] and half way done. I'm going to do the fronts soon. Can put up how to swap the fronts soon when I do them if you need to.know.
On a break from 306oc for personal reasons. If anyone needs or wants me most of you have my number and or facebook messenger
Thanks for the good times guys n gals. I might be back. Who knows.
Thanks for the good times guys n gals. I might be back. Who knows.