03-03-2014, 09:42 PM
hi i know this isnt entirely related to a 306 but here goes
iv recently fitted a 2.0 hdi in my 1.6 hdi mk2 partner/berlingo, iv fitted the new ecu from the doner vechicle which is bosch but single plug, my old ecu was bosch 3 plug. my new ecu is being sent away to be unlocked and enable free run mode so i dont need to change bsi and immobilzer etc but on new loom i have 2 plugs which connect to interior loom on doner, my wiring on van was on a plug that is 1 of the 3 on my old ecu so how can i connect these 2 plugs to my existing loom.
can anybody help
![[Image: IMG_3858_zps55447629.jpg]](http://i1372.photobucket.com/albums/ag327/jay2day/IMG_3858_zps55447629.jpg)
![[Image: IMG_3848_zps5da23d45.jpg]](http://i1372.photobucket.com/albums/ag327/jay2day/IMG_3848_zps5da23d45.jpg)
iv recently fitted a 2.0 hdi in my 1.6 hdi mk2 partner/berlingo, iv fitted the new ecu from the doner vechicle which is bosch but single plug, my old ecu was bosch 3 plug. my new ecu is being sent away to be unlocked and enable free run mode so i dont need to change bsi and immobilzer etc but on new loom i have 2 plugs which connect to interior loom on doner, my wiring on van was on a plug that is 1 of the 3 on my old ecu so how can i connect these 2 plugs to my existing loom.
can anybody help