+- 306oc - Peugeot 306 Owners Club & Forum (https://www.306oc.co.uk/forum)
+-- Forum: Engines (https://www.306oc.co.uk/forum/forumdisplay.php?fid=16)
+--- Forum: DW10 HDi section (https://www.306oc.co.uk/forum/forumdisplay.php?fid=10)
+--- Thread: hdi rhy conversion (/showthread.php?tid=21875)
hdi rhy conversion - jayspug86 - 03-03-2014
hi i know this isnt entirely related to a 306 but here goes
iv recently fitted a 2.0 hdi in my 1.6 hdi mk2 partner/berlingo, iv fitted the new ecu from the doner vechicle which is bosch but single plug, my old ecu was bosch 3 plug. my new ecu is being sent away to be unlocked and enable free run mode so i dont need to change bsi and immobilzer etc but on new loom i have 2 plugs which connect to interior loom on doner, my wiring on van was on a plug that is 1 of the 3 on my old ecu so how can i connect these 2 plugs to my existing loom.
can anybody help
![[Image: IMG_3858_zps55447629.jpg]](http://i1372.photobucket.com/albums/ag327/jay2day/IMG_3858_zps55447629.jpg)
![[Image: IMG_3848_zps5da23d45.jpg]](http://i1372.photobucket.com/albums/ag327/jay2day/IMG_3848_zps5da23d45.jpg)
RE: hdi rhy conversion - Poodle - 03-03-2014
Get someone with access to autodata to look up the wiring diagrams for you, or in haynes. Then it's a simple, if tedious, matter of cross-referencing everything to work out which wires need to join up and which you can get rid of. Might be the odd one you need to put a switch on or route somewhere else or something, but it's a pretty logical process.
RE: hdi rhy conversion - jayspug86 - 03-03-2014
iv tried haynes already and didnt find it very helpful, where else can i get the wiring diagrams from or who could i get to do it?
RE: hdi rhy conversion - Piggy - 03-03-2014
Why would you do this swap anyway?!!
RE: hdi rhy conversion - Poodle - 04-03-2014
Yeah, knowing how to read the diagrams is most of the battle.
As said, autodata is the other option really, but if you can't read wiring diagrams you're onto a bit of a non-starter...
RE: hdi rhy conversion - jayspug86 - 04-03-2014
(03-03-2014, 11:33 PM)Piggy Wrote: Why would you do this swap anyway?!!
i bought the van with a broken engine it had threw a rod out the side of block and dv6 engines are much more exspensive to replace, iv heard nothing but bad reviews about 1.6 hdi and when i suggested to eventually having my van mapped everyone i spoke to said just fit the 2.0 hdi as there good for more power than the dv6 and the earlier one would be a fairly straight forward swap