11-01-2014, 09:33 AM
You need to know the impedence of the subs. Whether they run at 1,2,4, etc ohm
Then take into consideration you are likely going to be running two subs off the same amp. You need to ensure the amp is delivering the same 1,2,4 etc ohm or you will have problems. Chances are you will eventually fry the amp.
If you use a monoblock amp it gets more fun wiring wise. Check out the jl audio wiring guides on their website it helps ALOT!
dont just buy an amp because the tms figure looks right, you wont be getting the most out of the subs and eventually will lead to problems
Then take into consideration you are likely going to be running two subs off the same amp. You need to ensure the amp is delivering the same 1,2,4 etc ohm or you will have problems. Chances are you will eventually fry the amp.
If you use a monoblock amp it gets more fun wiring wise. Check out the jl audio wiring guides on their website it helps ALOT!
dont just buy an amp because the tms figure looks right, you wont be getting the most out of the subs and eventually will lead to problems